Abstract
Ambient mechanical vibration energy can be converted into electrical energy using one of the most promising mechanism known as piezoelectric mechanism. In the mechanism, mechanical stress and strain generation in the piezoelectric materials can be converted into electrical energy which can be used for low power electronic devices. In this work, a T-shaped piezoelectric cantilever beam was analysed. The geometry of the cantilever beam was designed using SolidWorks. After that, the cantilever beam was simulated using Finite Element Method (FEM) in COMSOL Multiphysics. In the FEM simulation, the beam was kept under a vibration sources of 1g acceleration. As a result, maximum displacement at free end of the beam was found 2.47mm at resonant frequency of 238.75Hz. As piezoelectric energy harvesting from vibration depends on stress generation in piezoelectric materials, stress was analysed for the beam. The maximum amount of stress near the clamped end of the beam was found 2.39×108 N/m2 at resonance. The investigation showed that the designed and analysed T-shaped beam can be operated in low-frequency ambient vibration sources.
Original language | English |
---|---|
Title of host publication | 2016 IEEE International Conference on Semiconductor Electronics, ICSE 2016 - Proceedings |
Publisher | Institute of Electrical and Electronics Engineers Inc. |
Pages | 137-140 |
Number of pages | 4 |
Volume | 2016-September |
ISBN (Electronic) | 9781509023837 |
DOIs | |
Publication status | Published - 21 Sep 2016 |
Event | 12th IEEE International Conference on Semiconductor Electronics, ICSE 2016 - Bangsar, Kuala Lumpur, Malaysia Duration: 17 Aug 2016 → 19 Aug 2016 |
Other
Other | 12th IEEE International Conference on Semiconductor Electronics, ICSE 2016 |
---|---|
Country | Malaysia |
City | Bangsar, Kuala Lumpur |
Period | 17/8/16 → 19/8/16 |
Fingerprint
Keywords
- cantilever beam
- energy harvesting
- piezoelectric mechanism
- T-shape
- vibration
ASJC Scopus subject areas
- Electrical and Electronic Engineering
- Electronic, Optical and Magnetic Materials
Cite this
Vibration based T-shaped piezoelectric cantilever beam design using finite element method for energy harvesting devices. / Uddin, Md Naim; Islam, Md. Shabiul; Sampe, Jahariah; Wahab, Shafii A.; Md Ali, Sawal Hamid.
2016 IEEE International Conference on Semiconductor Electronics, ICSE 2016 - Proceedings. Vol. 2016-September Institute of Electrical and Electronics Engineers Inc., 2016. p. 137-140 7573610.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
}
TY - GEN
T1 - Vibration based T-shaped piezoelectric cantilever beam design using finite element method for energy harvesting devices
AU - Uddin, Md Naim
AU - Islam, Md. Shabiul
AU - Sampe, Jahariah
AU - Wahab, Shafii A.
AU - Md Ali, Sawal Hamid
PY - 2016/9/21
Y1 - 2016/9/21
N2 - Ambient mechanical vibration energy can be converted into electrical energy using one of the most promising mechanism known as piezoelectric mechanism. In the mechanism, mechanical stress and strain generation in the piezoelectric materials can be converted into electrical energy which can be used for low power electronic devices. In this work, a T-shaped piezoelectric cantilever beam was analysed. The geometry of the cantilever beam was designed using SolidWorks. After that, the cantilever beam was simulated using Finite Element Method (FEM) in COMSOL Multiphysics. In the FEM simulation, the beam was kept under a vibration sources of 1g acceleration. As a result, maximum displacement at free end of the beam was found 2.47mm at resonant frequency of 238.75Hz. As piezoelectric energy harvesting from vibration depends on stress generation in piezoelectric materials, stress was analysed for the beam. The maximum amount of stress near the clamped end of the beam was found 2.39×108 N/m2 at resonance. The investigation showed that the designed and analysed T-shaped beam can be operated in low-frequency ambient vibration sources.
AB - Ambient mechanical vibration energy can be converted into electrical energy using one of the most promising mechanism known as piezoelectric mechanism. In the mechanism, mechanical stress and strain generation in the piezoelectric materials can be converted into electrical energy which can be used for low power electronic devices. In this work, a T-shaped piezoelectric cantilever beam was analysed. The geometry of the cantilever beam was designed using SolidWorks. After that, the cantilever beam was simulated using Finite Element Method (FEM) in COMSOL Multiphysics. In the FEM simulation, the beam was kept under a vibration sources of 1g acceleration. As a result, maximum displacement at free end of the beam was found 2.47mm at resonant frequency of 238.75Hz. As piezoelectric energy harvesting from vibration depends on stress generation in piezoelectric materials, stress was analysed for the beam. The maximum amount of stress near the clamped end of the beam was found 2.39×108 N/m2 at resonance. The investigation showed that the designed and analysed T-shaped beam can be operated in low-frequency ambient vibration sources.
KW - cantilever beam
KW - energy harvesting
KW - piezoelectric mechanism
KW - T-shape
KW - vibration
UR - http://www.scopus.com/inward/record.url?scp=84990872939&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84990872939&partnerID=8YFLogxK
U2 - 10.1109/SMELEC.2016.7573610
DO - 10.1109/SMELEC.2016.7573610
M3 - Conference contribution
AN - SCOPUS:84990872939
VL - 2016-September
SP - 137
EP - 140
BT - 2016 IEEE International Conference on Semiconductor Electronics, ICSE 2016 - Proceedings
PB - Institute of Electrical and Electronics Engineers Inc.
ER -