Used cylinder oil modified cold-mix asphalt concrete

Research output: Contribution to journalArticle

12 Citations (Scopus)

Abstract

The purpose of this study is to evaluate mechanical properties of control and modified asphalt mixtures. The modified asphalt mixtures were studied on cold-mix asphalt. Used Cylinder Oil (UCO) was used as a modifier in this study. The modification efficiency was evaluated by the improvement in the performance of prepared asphalt concrete mixes. Physical analysis of the UCO was then performed. Asphalt concrete mixes having different percentages of UCO (0, 20, 25 and 30%) as a modifier were prepared. These samples were characterized using the Marshall Stability, indirect tension test, static creep and dynamic creep test. As a result, the addition of oil to the asphalt has reduced the solvency of maltenes. The higher the added percentages of oil are seen, the softer the asphalt-UCO binders happen. It is believed that the higher the percentages of the UCO were existed, the lower the ability of the mixes to resist deformation occurred.

Original languageEnglish
Pages (from-to)3485-3491
Number of pages7
JournalJournal of Applied Sciences
Volume7
Issue number22
Publication statusPublished - 15 Nov 2007

Fingerprint

Asphalt concrete
Asphalt
Asphalt mixtures
Concrete mixtures
Creep
Oils
Binders
Mechanical properties

Keywords

  • Cold-mix asphalt
  • Modified asphalt
  • Used cylinder oil

ASJC Scopus subject areas

  • General

Cite this

@article{4e8486a851bb4a999d68d923156e10cf,
title = "Used cylinder oil modified cold-mix asphalt concrete",
abstract = "The purpose of this study is to evaluate mechanical properties of control and modified asphalt mixtures. The modified asphalt mixtures were studied on cold-mix asphalt. Used Cylinder Oil (UCO) was used as a modifier in this study. The modification efficiency was evaluated by the improvement in the performance of prepared asphalt concrete mixes. Physical analysis of the UCO was then performed. Asphalt concrete mixes having different percentages of UCO (0, 20, 25 and 30{\%}) as a modifier were prepared. These samples were characterized using the Marshall Stability, indirect tension test, static creep and dynamic creep test. As a result, the addition of oil to the asphalt has reduced the solvency of maltenes. The higher the added percentages of oil are seen, the softer the asphalt-UCO binders happen. It is believed that the higher the percentages of the UCO were existed, the lower the ability of the mixes to resist deformation occurred.",
keywords = "Cold-mix asphalt, Modified asphalt, Used cylinder oil",
author = "Borhan, {Muhamad Nazri} and Fatihah Suja` and Amiruddin Ismail and {O.K. Rahmat}, {Riza Atiq Abdullah}",
year = "2007",
month = "11",
day = "15",
language = "English",
volume = "7",
pages = "3485--3491",
journal = "Journal of Applied Sciences",
issn = "1812-5654",
publisher = "Asian Network for Scientific Information",
number = "22",

}

TY - JOUR

T1 - Used cylinder oil modified cold-mix asphalt concrete

AU - Borhan, Muhamad Nazri

AU - Suja`, Fatihah

AU - Ismail, Amiruddin

AU - O.K. Rahmat, Riza Atiq Abdullah

PY - 2007/11/15

Y1 - 2007/11/15

N2 - The purpose of this study is to evaluate mechanical properties of control and modified asphalt mixtures. The modified asphalt mixtures were studied on cold-mix asphalt. Used Cylinder Oil (UCO) was used as a modifier in this study. The modification efficiency was evaluated by the improvement in the performance of prepared asphalt concrete mixes. Physical analysis of the UCO was then performed. Asphalt concrete mixes having different percentages of UCO (0, 20, 25 and 30%) as a modifier were prepared. These samples were characterized using the Marshall Stability, indirect tension test, static creep and dynamic creep test. As a result, the addition of oil to the asphalt has reduced the solvency of maltenes. The higher the added percentages of oil are seen, the softer the asphalt-UCO binders happen. It is believed that the higher the percentages of the UCO were existed, the lower the ability of the mixes to resist deformation occurred.

AB - The purpose of this study is to evaluate mechanical properties of control and modified asphalt mixtures. The modified asphalt mixtures were studied on cold-mix asphalt. Used Cylinder Oil (UCO) was used as a modifier in this study. The modification efficiency was evaluated by the improvement in the performance of prepared asphalt concrete mixes. Physical analysis of the UCO was then performed. Asphalt concrete mixes having different percentages of UCO (0, 20, 25 and 30%) as a modifier were prepared. These samples were characterized using the Marshall Stability, indirect tension test, static creep and dynamic creep test. As a result, the addition of oil to the asphalt has reduced the solvency of maltenes. The higher the added percentages of oil are seen, the softer the asphalt-UCO binders happen. It is believed that the higher the percentages of the UCO were existed, the lower the ability of the mixes to resist deformation occurred.

KW - Cold-mix asphalt

KW - Modified asphalt

KW - Used cylinder oil

UR - http://www.scopus.com/inward/record.url?scp=36848999721&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=36848999721&partnerID=8YFLogxK

M3 - Article

VL - 7

SP - 3485

EP - 3491

JO - Journal of Applied Sciences

JF - Journal of Applied Sciences

SN - 1812-5654

IS - 22

ER -