Use of failure mode and effects analysis (FMEA) method in remanufacturing analysis for engine block

Tajul Ariffin Abdullah, Akmal Hashim, Abu Bakar Baharudin, Dzuraidah Abd. Wahab

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

Over this recent year, a growing population that increase the economic development, capacity of landfills and critical environmental impact are gaining the importance role of remanufacturing activities. Moreover, many durable products are disposed in landfills at the end of their useful lives without undergoing by any recovery process that affect the landfill space has been decreasing in all over the world including by our country. Remanufacturing is the process by which used products are returned to their new state with minimum waste and expenditure on materials and energy. This study focus on the concept concept of remanufacturing practice in automotive sector. Malaysians have been generated wastes at a manufacturing sector especially in the automotive sector. On top of that, the conventional remanufacturing systems that have been constructed in Malaysia are not widely marketed and lack of practical applications. This study provides a remanufacturing analysis for improvement to the automotive sectors on engine block. Furthermore, this study presents the information based on the discussion of Failure Mode and Effects Analysis (FMEA) to encourage the implementation of remanufacturing activities. By making the remanufacturing activities possible to implement efficiently, manufacturer may decrease their production costs, decrease refuse and landfill materials, and increase their quality management.

Original languageEnglish
Title of host publicationApplied Mechanics and Materials
Pages1026-1033
Number of pages8
Volume465-466
DOIs
Publication statusPublished - 2014
Event4th International Conference on Mechanical and Manufacturing Engineering, ICME 2013 - Bangi-Putrajaya
Duration: 17 Dec 201318 Dec 2013

Publication series

NameApplied Mechanics and Materials
Volume465-466
ISSN (Print)16609336
ISSN (Electronic)16627482

Other

Other4th International Conference on Mechanical and Manufacturing Engineering, ICME 2013
CityBangi-Putrajaya
Period17/12/1318/12/13

Fingerprint

Land fill
Failure modes
Engines
Quality management
Environmental impact
Recovery
Economics
Costs

Keywords

  • Automotive
  • Environment
  • Failure mode and effects analysis
  • Remanufacturing

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Abdullah, T. A., Hashim, A., Baharudin, A. B., & Abd. Wahab, D. (2014). Use of failure mode and effects analysis (FMEA) method in remanufacturing analysis for engine block. In Applied Mechanics and Materials (Vol. 465-466, pp. 1026-1033). (Applied Mechanics and Materials; Vol. 465-466). https://doi.org/10.4028/www.scientific.net/AMM.465-466.1026

Use of failure mode and effects analysis (FMEA) method in remanufacturing analysis for engine block. / Abdullah, Tajul Ariffin; Hashim, Akmal; Baharudin, Abu Bakar; Abd. Wahab, Dzuraidah.

Applied Mechanics and Materials. Vol. 465-466 2014. p. 1026-1033 (Applied Mechanics and Materials; Vol. 465-466).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abdullah, TA, Hashim, A, Baharudin, AB & Abd. Wahab, D 2014, Use of failure mode and effects analysis (FMEA) method in remanufacturing analysis for engine block. in Applied Mechanics and Materials. vol. 465-466, Applied Mechanics and Materials, vol. 465-466, pp. 1026-1033, 4th International Conference on Mechanical and Manufacturing Engineering, ICME 2013, Bangi-Putrajaya, 17/12/13. https://doi.org/10.4028/www.scientific.net/AMM.465-466.1026
Abdullah TA, Hashim A, Baharudin AB, Abd. Wahab D. Use of failure mode and effects analysis (FMEA) method in remanufacturing analysis for engine block. In Applied Mechanics and Materials. Vol. 465-466. 2014. p. 1026-1033. (Applied Mechanics and Materials). https://doi.org/10.4028/www.scientific.net/AMM.465-466.1026
Abdullah, Tajul Ariffin ; Hashim, Akmal ; Baharudin, Abu Bakar ; Abd. Wahab, Dzuraidah. / Use of failure mode and effects analysis (FMEA) method in remanufacturing analysis for engine block. Applied Mechanics and Materials. Vol. 465-466 2014. pp. 1026-1033 (Applied Mechanics and Materials).
@inproceedings{bc65b4f2c6824327998bbd7871258b45,
title = "Use of failure mode and effects analysis (FMEA) method in remanufacturing analysis for engine block",
abstract = "Over this recent year, a growing population that increase the economic development, capacity of landfills and critical environmental impact are gaining the importance role of remanufacturing activities. Moreover, many durable products are disposed in landfills at the end of their useful lives without undergoing by any recovery process that affect the landfill space has been decreasing in all over the world including by our country. Remanufacturing is the process by which used products are returned to their new state with minimum waste and expenditure on materials and energy. This study focus on the concept concept of remanufacturing practice in automotive sector. Malaysians have been generated wastes at a manufacturing sector especially in the automotive sector. On top of that, the conventional remanufacturing systems that have been constructed in Malaysia are not widely marketed and lack of practical applications. This study provides a remanufacturing analysis for improvement to the automotive sectors on engine block. Furthermore, this study presents the information based on the discussion of Failure Mode and Effects Analysis (FMEA) to encourage the implementation of remanufacturing activities. By making the remanufacturing activities possible to implement efficiently, manufacturer may decrease their production costs, decrease refuse and landfill materials, and increase their quality management.",
keywords = "Automotive, Environment, Failure mode and effects analysis, Remanufacturing",
author = "Abdullah, {Tajul Ariffin} and Akmal Hashim and Baharudin, {Abu Bakar} and {Abd. Wahab}, Dzuraidah",
year = "2014",
doi = "10.4028/www.scientific.net/AMM.465-466.1026",
language = "English",
isbn = "9783037859339",
volume = "465-466",
series = "Applied Mechanics and Materials",
pages = "1026--1033",
booktitle = "Applied Mechanics and Materials",

}

TY - GEN

T1 - Use of failure mode and effects analysis (FMEA) method in remanufacturing analysis for engine block

AU - Abdullah, Tajul Ariffin

AU - Hashim, Akmal

AU - Baharudin, Abu Bakar

AU - Abd. Wahab, Dzuraidah

PY - 2014

Y1 - 2014

N2 - Over this recent year, a growing population that increase the economic development, capacity of landfills and critical environmental impact are gaining the importance role of remanufacturing activities. Moreover, many durable products are disposed in landfills at the end of their useful lives without undergoing by any recovery process that affect the landfill space has been decreasing in all over the world including by our country. Remanufacturing is the process by which used products are returned to their new state with minimum waste and expenditure on materials and energy. This study focus on the concept concept of remanufacturing practice in automotive sector. Malaysians have been generated wastes at a manufacturing sector especially in the automotive sector. On top of that, the conventional remanufacturing systems that have been constructed in Malaysia are not widely marketed and lack of practical applications. This study provides a remanufacturing analysis for improvement to the automotive sectors on engine block. Furthermore, this study presents the information based on the discussion of Failure Mode and Effects Analysis (FMEA) to encourage the implementation of remanufacturing activities. By making the remanufacturing activities possible to implement efficiently, manufacturer may decrease their production costs, decrease refuse and landfill materials, and increase their quality management.

AB - Over this recent year, a growing population that increase the economic development, capacity of landfills and critical environmental impact are gaining the importance role of remanufacturing activities. Moreover, many durable products are disposed in landfills at the end of their useful lives without undergoing by any recovery process that affect the landfill space has been decreasing in all over the world including by our country. Remanufacturing is the process by which used products are returned to their new state with minimum waste and expenditure on materials and energy. This study focus on the concept concept of remanufacturing practice in automotive sector. Malaysians have been generated wastes at a manufacturing sector especially in the automotive sector. On top of that, the conventional remanufacturing systems that have been constructed in Malaysia are not widely marketed and lack of practical applications. This study provides a remanufacturing analysis for improvement to the automotive sectors on engine block. Furthermore, this study presents the information based on the discussion of Failure Mode and Effects Analysis (FMEA) to encourage the implementation of remanufacturing activities. By making the remanufacturing activities possible to implement efficiently, manufacturer may decrease their production costs, decrease refuse and landfill materials, and increase their quality management.

KW - Automotive

KW - Environment

KW - Failure mode and effects analysis

KW - Remanufacturing

UR - http://www.scopus.com/inward/record.url?scp=84891929308&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84891929308&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMM.465-466.1026

DO - 10.4028/www.scientific.net/AMM.465-466.1026

M3 - Conference contribution

SN - 9783037859339

VL - 465-466

T3 - Applied Mechanics and Materials

SP - 1026

EP - 1033

BT - Applied Mechanics and Materials

ER -