Ulasan kaedah kitar semula sisa bateri

Farhah Abdillahil Moktamin, Goh Choo Ta, Mazlin Mokhtar, Mohd Rozaimi Ariffin

Research output: Contribution to journalReview article

Abstract

The generation of waste batteries is increasing due to the wide application and short life span of batteries. The heavy metals used inside a battery are highly toxic and can cause harm to humans and to the environment. However, if waste batteries are recovered properly through a recycling process, precious metals inside the batteries can be extracted. In general, there are three methods for recycling waste batteries, namely pyrometallurgy, hydrometallurgy and bio-hydrometallurgy. This article reviews and discusses the efficiency and effectiveness of these methods in recycling waste batteries. Based on the review, each recycling method has its specific characteristics. The hydrometallurgy method tends to be used for recycling Li-ion batteries while the pyrometallurgy method tends to eliminate plumbum in automotive waste batteries. In general, the hydrometallurgical method is commonly used for recycling batteries due to its shorter process and lower cost.

Original languageMalay
Pages (from-to)79-93
Number of pages15
JournalJurnal Teknologi
Volume78
Issue number9
DOIs
Publication statusPublished - 2016

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Ulasan kaedah kitar semula sisa bateri. / Moktamin, Farhah Abdillahil; Choo Ta, Goh; Mokhtar, Mazlin; Ariffin, Mohd Rozaimi.

In: Jurnal Teknologi, Vol. 78, No. 9, 2016, p. 79-93.

Research output: Contribution to journalReview article

Moktamin, Farhah Abdillahil ; Choo Ta, Goh ; Mokhtar, Mazlin ; Ariffin, Mohd Rozaimi. / Ulasan kaedah kitar semula sisa bateri. In: Jurnal Teknologi. 2016 ; Vol. 78, No. 9. pp. 79-93.
@article{66b4be3f898c4697a4805743e02c5e5d,
title = "Ulasan kaedah kitar semula sisa bateri",
abstract = "The generation of waste batteries is increasing due to the wide application and short life span of batteries. The heavy metals used inside a battery are highly toxic and can cause harm to humans and to the environment. However, if waste batteries are recovered properly through a recycling process, precious metals inside the batteries can be extracted. In general, there are three methods for recycling waste batteries, namely pyrometallurgy, hydrometallurgy and bio-hydrometallurgy. This article reviews and discusses the efficiency and effectiveness of these methods in recycling waste batteries. Based on the review, each recycling method has its specific characteristics. The hydrometallurgy method tends to be used for recycling Li-ion batteries while the pyrometallurgy method tends to eliminate plumbum in automotive waste batteries. In general, the hydrometallurgical method is commonly used for recycling batteries due to its shorter process and lower cost.",
keywords = "Battery waste, Bio-hydrometallurgy, Hydrometallurgy, Pyrometallurgy, Recycling",
author = "Moktamin, {Farhah Abdillahil} and {Choo Ta}, Goh and Mazlin Mokhtar and Ariffin, {Mohd Rozaimi}",
year = "2016",
doi = "10.11113/jt.v78.4903",
language = "Malay",
volume = "78",
pages = "79--93",
journal = "Jurnal Teknologi",
issn = "0127-9696",
publisher = "Penerbit Universiti Teknologi Malaysia",
number = "9",

}

TY - JOUR

T1 - Ulasan kaedah kitar semula sisa bateri

AU - Moktamin, Farhah Abdillahil

AU - Choo Ta, Goh

AU - Mokhtar, Mazlin

AU - Ariffin, Mohd Rozaimi

PY - 2016

Y1 - 2016

N2 - The generation of waste batteries is increasing due to the wide application and short life span of batteries. The heavy metals used inside a battery are highly toxic and can cause harm to humans and to the environment. However, if waste batteries are recovered properly through a recycling process, precious metals inside the batteries can be extracted. In general, there are three methods for recycling waste batteries, namely pyrometallurgy, hydrometallurgy and bio-hydrometallurgy. This article reviews and discusses the efficiency and effectiveness of these methods in recycling waste batteries. Based on the review, each recycling method has its specific characteristics. The hydrometallurgy method tends to be used for recycling Li-ion batteries while the pyrometallurgy method tends to eliminate plumbum in automotive waste batteries. In general, the hydrometallurgical method is commonly used for recycling batteries due to its shorter process and lower cost.

AB - The generation of waste batteries is increasing due to the wide application and short life span of batteries. The heavy metals used inside a battery are highly toxic and can cause harm to humans and to the environment. However, if waste batteries are recovered properly through a recycling process, precious metals inside the batteries can be extracted. In general, there are three methods for recycling waste batteries, namely pyrometallurgy, hydrometallurgy and bio-hydrometallurgy. This article reviews and discusses the efficiency and effectiveness of these methods in recycling waste batteries. Based on the review, each recycling method has its specific characteristics. The hydrometallurgy method tends to be used for recycling Li-ion batteries while the pyrometallurgy method tends to eliminate plumbum in automotive waste batteries. In general, the hydrometallurgical method is commonly used for recycling batteries due to its shorter process and lower cost.

KW - Battery waste

KW - Bio-hydrometallurgy

KW - Hydrometallurgy

KW - Pyrometallurgy

KW - Recycling

UR - http://www.scopus.com/inward/record.url?scp=84988354761&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84988354761&partnerID=8YFLogxK

U2 - 10.11113/jt.v78.4903

DO - 10.11113/jt.v78.4903

M3 - Review article

AN - SCOPUS:84988354761

VL - 78

SP - 79

EP - 93

JO - Jurnal Teknologi

JF - Jurnal Teknologi

SN - 0127-9696

IS - 9

ER -