Tribological characterization of the cutting zone in milling nickel based alloy

Musfirah Abdul Hadi, Jaharah A Ghani, Che Hassan Che Haron, Natasha A. Raof

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

In the area of tribology, surface roughness has become one of the most important factors that contributed to the evaluation of part quality during machining operation. In order to understand the behavior of cryogenic cooling assistance in machining Inconel 718, this paper aims to provide better understanding of tribological characterization of liquid nitrogen near the cutting zone of this material in milling process. Experiments were performed using physical vapor deposition (PVD) - coated carbide inserts under cryogenic and dry cutting condition. The cryogenic results of the cutting temperature, cutting forces and surface roughness of the ball nose cutting tool have been compared with those of dry machining. Finally, experimental results proved that cryogenic implementation can decrease the amount of heat transferred to the tool up to almost 70% and improve the surface roughness to a maximum of 31% when compared with dry machining.

Original languageEnglish
Title of host publicationApplied Mechanics and Materials
PublisherTrans Tech Publications Ltd
Pages12-16
Number of pages5
Volume554
ISBN (Print)9783038351092
DOIs
Publication statusPublished - 2014

Publication series

NameApplied Mechanics and Materials
Volume554
ISSN (Print)16609336
ISSN (Electronic)16627482

Fingerprint

Milling (machining)
Cryogenics
Machining
Nickel
Surface roughness
Tribology
Physical vapor deposition
Liquid nitrogen
Cutting tools
Carbides
Cooling
Experiments
Temperature

Keywords

  • Cryogenic cooling
  • Cutting zone
  • Dry cuting
  • Heat transferred
  • Inconel 718

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Hadi, M. A., A Ghani, J., Che Haron, C. H., & Raof, N. A. (2014). Tribological characterization of the cutting zone in milling nickel based alloy. In Applied Mechanics and Materials (Vol. 554, pp. 12-16). (Applied Mechanics and Materials; Vol. 554). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/AMM.554.12

Tribological characterization of the cutting zone in milling nickel based alloy. / Hadi, Musfirah Abdul; A Ghani, Jaharah; Che Haron, Che Hassan; Raof, Natasha A.

Applied Mechanics and Materials. Vol. 554 Trans Tech Publications Ltd, 2014. p. 12-16 (Applied Mechanics and Materials; Vol. 554).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hadi, MA, A Ghani, J, Che Haron, CH & Raof, NA 2014, Tribological characterization of the cutting zone in milling nickel based alloy. in Applied Mechanics and Materials. vol. 554, Applied Mechanics and Materials, vol. 554, Trans Tech Publications Ltd, pp. 12-16. https://doi.org/10.4028/www.scientific.net/AMM.554.12
Hadi MA, A Ghani J, Che Haron CH, Raof NA. Tribological characterization of the cutting zone in milling nickel based alloy. In Applied Mechanics and Materials. Vol. 554. Trans Tech Publications Ltd. 2014. p. 12-16. (Applied Mechanics and Materials). https://doi.org/10.4028/www.scientific.net/AMM.554.12
Hadi, Musfirah Abdul ; A Ghani, Jaharah ; Che Haron, Che Hassan ; Raof, Natasha A. / Tribological characterization of the cutting zone in milling nickel based alloy. Applied Mechanics and Materials. Vol. 554 Trans Tech Publications Ltd, 2014. pp. 12-16 (Applied Mechanics and Materials).
@inproceedings{b27b46ec3b9e47668cfbdda6a47a9862,
title = "Tribological characterization of the cutting zone in milling nickel based alloy",
abstract = "In the area of tribology, surface roughness has become one of the most important factors that contributed to the evaluation of part quality during machining operation. In order to understand the behavior of cryogenic cooling assistance in machining Inconel 718, this paper aims to provide better understanding of tribological characterization of liquid nitrogen near the cutting zone of this material in milling process. Experiments were performed using physical vapor deposition (PVD) - coated carbide inserts under cryogenic and dry cutting condition. The cryogenic results of the cutting temperature, cutting forces and surface roughness of the ball nose cutting tool have been compared with those of dry machining. Finally, experimental results proved that cryogenic implementation can decrease the amount of heat transferred to the tool up to almost 70{\%} and improve the surface roughness to a maximum of 31{\%} when compared with dry machining.",
keywords = "Cryogenic cooling, Cutting zone, Dry cuting, Heat transferred, Inconel 718",
author = "Hadi, {Musfirah Abdul} and {A Ghani}, Jaharah and {Che Haron}, {Che Hassan} and Raof, {Natasha A.}",
year = "2014",
doi = "10.4028/www.scientific.net/AMM.554.12",
language = "English",
isbn = "9783038351092",
volume = "554",
series = "Applied Mechanics and Materials",
publisher = "Trans Tech Publications Ltd",
pages = "12--16",
booktitle = "Applied Mechanics and Materials",

}

TY - GEN

T1 - Tribological characterization of the cutting zone in milling nickel based alloy

AU - Hadi, Musfirah Abdul

AU - A Ghani, Jaharah

AU - Che Haron, Che Hassan

AU - Raof, Natasha A.

PY - 2014

Y1 - 2014

N2 - In the area of tribology, surface roughness has become one of the most important factors that contributed to the evaluation of part quality during machining operation. In order to understand the behavior of cryogenic cooling assistance in machining Inconel 718, this paper aims to provide better understanding of tribological characterization of liquid nitrogen near the cutting zone of this material in milling process. Experiments were performed using physical vapor deposition (PVD) - coated carbide inserts under cryogenic and dry cutting condition. The cryogenic results of the cutting temperature, cutting forces and surface roughness of the ball nose cutting tool have been compared with those of dry machining. Finally, experimental results proved that cryogenic implementation can decrease the amount of heat transferred to the tool up to almost 70% and improve the surface roughness to a maximum of 31% when compared with dry machining.

AB - In the area of tribology, surface roughness has become one of the most important factors that contributed to the evaluation of part quality during machining operation. In order to understand the behavior of cryogenic cooling assistance in machining Inconel 718, this paper aims to provide better understanding of tribological characterization of liquid nitrogen near the cutting zone of this material in milling process. Experiments were performed using physical vapor deposition (PVD) - coated carbide inserts under cryogenic and dry cutting condition. The cryogenic results of the cutting temperature, cutting forces and surface roughness of the ball nose cutting tool have been compared with those of dry machining. Finally, experimental results proved that cryogenic implementation can decrease the amount of heat transferred to the tool up to almost 70% and improve the surface roughness to a maximum of 31% when compared with dry machining.

KW - Cryogenic cooling

KW - Cutting zone

KW - Dry cuting

KW - Heat transferred

KW - Inconel 718

UR - http://www.scopus.com/inward/record.url?scp=84903545708&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84903545708&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMM.554.12

DO - 10.4028/www.scientific.net/AMM.554.12

M3 - Conference contribution

SN - 9783038351092

VL - 554

T3 - Applied Mechanics and Materials

SP - 12

EP - 16

BT - Applied Mechanics and Materials

PB - Trans Tech Publications Ltd

ER -