Transparent conductive electrode of fluorine doped tin oxide prepared by inkjet printing technique

Wan Zurina Samad, Muhamad Mat Salleh, Ashkan Shafiee, Mohd. Ambar Yarmo

Research output: Chapter in Book/Report/Conference proceedingConference contribution

11 Citations (Scopus)

Abstract

Fluorine doped tin oxide (FTO) thin films have been developed as alternatives to ITO for thin film transparent electrode applications. In this works, the FTO thin films were deposited using inkjet printing technique since the technique is a promising deposition method to fabricate low-cost devices. The FTO precursor was prepared by reacting SnCl 4·5H 2O and NH4F at 60°C in a sealed container. The thin films were deposited on glass substrates at 40°C with variations of printing layers. The optical and electrical properties of the films were affected by the number of printed layers. It was observed the four layers film has the optimum optical transmittance and sheet resistance which were 96 %T and 16.4 Ω/cm respectively.

Original languageEnglish
Title of host publicationMaterials Science Forum
Pages694-697
Number of pages4
Volume663-665
DOIs
Publication statusPublished - 2011
Event2010 International Conference on Optical, Electronic and Electrical Materials, OEEM2010 - Kunming
Duration: 1 Aug 20104 Aug 2010

Publication series

NameMaterials Science Forum
Volume663-665
ISSN (Print)02555476

Other

Other2010 International Conference on Optical, Electronic and Electrical Materials, OEEM2010
CityKunming
Period1/8/104/8/10

Fingerprint

Fluorine
Tin oxides
printing
tin oxides
fluorine
Printing
Thin films
Electrodes
electrodes
thin films
Oxide films
Sheet resistance
Opacity
ITO (semiconductors)
containers
Containers
transmittance
Electric properties
Optical properties
electrical properties

Keywords

  • Fluorine doped tin oxide
  • Inkjet printing
  • Thin films deposition
  • Transparent electrode

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanical Engineering
  • Mechanics of Materials

Cite this

Samad, W. Z., Mat Salleh, M., Shafiee, A., & Yarmo, M. A. (2011). Transparent conductive electrode of fluorine doped tin oxide prepared by inkjet printing technique. In Materials Science Forum (Vol. 663-665, pp. 694-697). (Materials Science Forum; Vol. 663-665). https://doi.org/10.4028/www.scientific.net/MSF.663-665.694

Transparent conductive electrode of fluorine doped tin oxide prepared by inkjet printing technique. / Samad, Wan Zurina; Mat Salleh, Muhamad; Shafiee, Ashkan; Yarmo, Mohd. Ambar.

Materials Science Forum. Vol. 663-665 2011. p. 694-697 (Materials Science Forum; Vol. 663-665).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Samad, WZ, Mat Salleh, M, Shafiee, A & Yarmo, MA 2011, Transparent conductive electrode of fluorine doped tin oxide prepared by inkjet printing technique. in Materials Science Forum. vol. 663-665, Materials Science Forum, vol. 663-665, pp. 694-697, 2010 International Conference on Optical, Electronic and Electrical Materials, OEEM2010, Kunming, 1/8/10. https://doi.org/10.4028/www.scientific.net/MSF.663-665.694
Samad, Wan Zurina ; Mat Salleh, Muhamad ; Shafiee, Ashkan ; Yarmo, Mohd. Ambar. / Transparent conductive electrode of fluorine doped tin oxide prepared by inkjet printing technique. Materials Science Forum. Vol. 663-665 2011. pp. 694-697 (Materials Science Forum).
@inproceedings{41c9d42f416441af8aa202ddfa9dd30b,
title = "Transparent conductive electrode of fluorine doped tin oxide prepared by inkjet printing technique",
abstract = "Fluorine doped tin oxide (FTO) thin films have been developed as alternatives to ITO for thin film transparent electrode applications. In this works, the FTO thin films were deposited using inkjet printing technique since the technique is a promising deposition method to fabricate low-cost devices. The FTO precursor was prepared by reacting SnCl 4·5H 2O and NH4F at 60°C in a sealed container. The thin films were deposited on glass substrates at 40°C with variations of printing layers. The optical and electrical properties of the films were affected by the number of printed layers. It was observed the four layers film has the optimum optical transmittance and sheet resistance which were 96 {\%}T and 16.4 Ω/cm respectively.",
keywords = "Fluorine doped tin oxide, Inkjet printing, Thin films deposition, Transparent electrode",
author = "Samad, {Wan Zurina} and {Mat Salleh}, Muhamad and Ashkan Shafiee and Yarmo, {Mohd. Ambar}",
year = "2011",
doi = "10.4028/www.scientific.net/MSF.663-665.694",
language = "English",
isbn = "0878492119",
volume = "663-665",
series = "Materials Science Forum",
pages = "694--697",
booktitle = "Materials Science Forum",

}

TY - GEN

T1 - Transparent conductive electrode of fluorine doped tin oxide prepared by inkjet printing technique

AU - Samad, Wan Zurina

AU - Mat Salleh, Muhamad

AU - Shafiee, Ashkan

AU - Yarmo, Mohd. Ambar

PY - 2011

Y1 - 2011

N2 - Fluorine doped tin oxide (FTO) thin films have been developed as alternatives to ITO for thin film transparent electrode applications. In this works, the FTO thin films were deposited using inkjet printing technique since the technique is a promising deposition method to fabricate low-cost devices. The FTO precursor was prepared by reacting SnCl 4·5H 2O and NH4F at 60°C in a sealed container. The thin films were deposited on glass substrates at 40°C with variations of printing layers. The optical and electrical properties of the films were affected by the number of printed layers. It was observed the four layers film has the optimum optical transmittance and sheet resistance which were 96 %T and 16.4 Ω/cm respectively.

AB - Fluorine doped tin oxide (FTO) thin films have been developed as alternatives to ITO for thin film transparent electrode applications. In this works, the FTO thin films were deposited using inkjet printing technique since the technique is a promising deposition method to fabricate low-cost devices. The FTO precursor was prepared by reacting SnCl 4·5H 2O and NH4F at 60°C in a sealed container. The thin films were deposited on glass substrates at 40°C with variations of printing layers. The optical and electrical properties of the films were affected by the number of printed layers. It was observed the four layers film has the optimum optical transmittance and sheet resistance which were 96 %T and 16.4 Ω/cm respectively.

KW - Fluorine doped tin oxide

KW - Inkjet printing

KW - Thin films deposition

KW - Transparent electrode

UR - http://www.scopus.com/inward/record.url?scp=78649940516&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=78649940516&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/MSF.663-665.694

DO - 10.4028/www.scientific.net/MSF.663-665.694

M3 - Conference contribution

SN - 0878492119

SN - 9780878492114

VL - 663-665

T3 - Materials Science Forum

SP - 694

EP - 697

BT - Materials Science Forum

ER -