Time domain analysis method of the impulse vibro-acoustic signal for fatigue strength characterisation of metallic material

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

This paper proposes an alternative statistical approach that can significantly characterise the fatigue strength property of metallic material. In this study, a simple impulsive excitation technique based on ASTM E1876 is conducted to measure the vibro-acoustic signal simultaneously using data acquisition consisted of an accelerometer-microphone configuration. The considered metallic material in the proposed design is composed of rectangular bar in cross section of medium carbon steel S50C, stainless steel AISI 304, cast iron FCD 500 and brass with a similar size of dimension as a specimen. To take into account the effect of noise existance, an alternative Z-stem filter de-noising technique is derived and applied to minimise the noise frequency components. Moreover, the effectiveness of this filtering technique is calculated. The filtered vibro-acoustic signal has been statistically analysed using an alternative time domain analysis method known as Mesokurtosis Zonal Nonparametric (M-Z-N). The accurate curve fitting equation for every metallic material is obtained using the combination of the calculated M-Z-N coefficient for vibration and acoustic impulse signals. The fatigue strength characterisation is carried out by the comparison of the experimental results with fatigue strength properties obtained in the literature. Correlation between the slopes of the curve fitting and fatigue strength values validate the proposed method.

Original languageEnglish
Title of host publicationProcedia Engineering
Pages539-548
Number of pages10
Volume66
DOIs
Publication statusPublished - 2013
Event5th International Conference on Fatigue Design, Fatigue Design 2013 - Senlis, France
Duration: 27 Nov 201328 Nov 2013

Other

Other5th International Conference on Fatigue Design, Fatigue Design 2013
CountryFrance
CitySenlis
Period27/11/1328/11/13

Fingerprint

Time domain analysis
Acoustics
Curve fitting
Brass
Microphones
Cast iron
Accelerometers
Vibrations (mechanical)
Carbon steel
Data acquisition
Stainless steel
Fatigue strength

Keywords

  • Fatigue strength
  • Impulsive excitation technique
  • Statistical signal processing
  • Time domain analysis method
  • Vibro-acoustic signal

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Time domain analysis method of the impulse vibro-acoustic signal for fatigue strength characterisation of metallic material. / Nuawi, Mohd. Zaki; Bahari, A. R.; Abdullah, Shahrum; Mohd Ihsan, Ahmad Kamal Ariffin; Mohd Nopiah, Zulkifli.

Procedia Engineering. Vol. 66 2013. p. 539-548.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nuawi, MZ, Bahari, AR, Abdullah, S, Mohd Ihsan, AKA & Mohd Nopiah, Z 2013, Time domain analysis method of the impulse vibro-acoustic signal for fatigue strength characterisation of metallic material. in Procedia Engineering. vol. 66, pp. 539-548, 5th International Conference on Fatigue Design, Fatigue Design 2013, Senlis, France, 27/11/13. https://doi.org/10.1016/j.proeng.2013.12.106
@inproceedings{cec3fd3fdda447a0bd33eece3f21f07b,
title = "Time domain analysis method of the impulse vibro-acoustic signal for fatigue strength characterisation of metallic material",
abstract = "This paper proposes an alternative statistical approach that can significantly characterise the fatigue strength property of metallic material. In this study, a simple impulsive excitation technique based on ASTM E1876 is conducted to measure the vibro-acoustic signal simultaneously using data acquisition consisted of an accelerometer-microphone configuration. The considered metallic material in the proposed design is composed of rectangular bar in cross section of medium carbon steel S50C, stainless steel AISI 304, cast iron FCD 500 and brass with a similar size of dimension as a specimen. To take into account the effect of noise existance, an alternative Z-stem filter de-noising technique is derived and applied to minimise the noise frequency components. Moreover, the effectiveness of this filtering technique is calculated. The filtered vibro-acoustic signal has been statistically analysed using an alternative time domain analysis method known as Mesokurtosis Zonal Nonparametric (M-Z-N). The accurate curve fitting equation for every metallic material is obtained using the combination of the calculated M-Z-N coefficient for vibration and acoustic impulse signals. The fatigue strength characterisation is carried out by the comparison of the experimental results with fatigue strength properties obtained in the literature. Correlation between the slopes of the curve fitting and fatigue strength values validate the proposed method.",
keywords = "Fatigue strength, Impulsive excitation technique, Statistical signal processing, Time domain analysis method, Vibro-acoustic signal",
author = "Nuawi, {Mohd. Zaki} and Bahari, {A. R.} and Shahrum Abdullah and {Mohd Ihsan}, {Ahmad Kamal Ariffin} and {Mohd Nopiah}, Zulkifli",
year = "2013",
doi = "10.1016/j.proeng.2013.12.106",
language = "English",
volume = "66",
pages = "539--548",
booktitle = "Procedia Engineering",

}

TY - GEN

T1 - Time domain analysis method of the impulse vibro-acoustic signal for fatigue strength characterisation of metallic material

AU - Nuawi, Mohd. Zaki

AU - Bahari, A. R.

AU - Abdullah, Shahrum

AU - Mohd Ihsan, Ahmad Kamal Ariffin

AU - Mohd Nopiah, Zulkifli

PY - 2013

Y1 - 2013

N2 - This paper proposes an alternative statistical approach that can significantly characterise the fatigue strength property of metallic material. In this study, a simple impulsive excitation technique based on ASTM E1876 is conducted to measure the vibro-acoustic signal simultaneously using data acquisition consisted of an accelerometer-microphone configuration. The considered metallic material in the proposed design is composed of rectangular bar in cross section of medium carbon steel S50C, stainless steel AISI 304, cast iron FCD 500 and brass with a similar size of dimension as a specimen. To take into account the effect of noise existance, an alternative Z-stem filter de-noising technique is derived and applied to minimise the noise frequency components. Moreover, the effectiveness of this filtering technique is calculated. The filtered vibro-acoustic signal has been statistically analysed using an alternative time domain analysis method known as Mesokurtosis Zonal Nonparametric (M-Z-N). The accurate curve fitting equation for every metallic material is obtained using the combination of the calculated M-Z-N coefficient for vibration and acoustic impulse signals. The fatigue strength characterisation is carried out by the comparison of the experimental results with fatigue strength properties obtained in the literature. Correlation between the slopes of the curve fitting and fatigue strength values validate the proposed method.

AB - This paper proposes an alternative statistical approach that can significantly characterise the fatigue strength property of metallic material. In this study, a simple impulsive excitation technique based on ASTM E1876 is conducted to measure the vibro-acoustic signal simultaneously using data acquisition consisted of an accelerometer-microphone configuration. The considered metallic material in the proposed design is composed of rectangular bar in cross section of medium carbon steel S50C, stainless steel AISI 304, cast iron FCD 500 and brass with a similar size of dimension as a specimen. To take into account the effect of noise existance, an alternative Z-stem filter de-noising technique is derived and applied to minimise the noise frequency components. Moreover, the effectiveness of this filtering technique is calculated. The filtered vibro-acoustic signal has been statistically analysed using an alternative time domain analysis method known as Mesokurtosis Zonal Nonparametric (M-Z-N). The accurate curve fitting equation for every metallic material is obtained using the combination of the calculated M-Z-N coefficient for vibration and acoustic impulse signals. The fatigue strength characterisation is carried out by the comparison of the experimental results with fatigue strength properties obtained in the literature. Correlation between the slopes of the curve fitting and fatigue strength values validate the proposed method.

KW - Fatigue strength

KW - Impulsive excitation technique

KW - Statistical signal processing

KW - Time domain analysis method

KW - Vibro-acoustic signal

UR - http://www.scopus.com/inward/record.url?scp=84894483567&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84894483567&partnerID=8YFLogxK

U2 - 10.1016/j.proeng.2013.12.106

DO - 10.1016/j.proeng.2013.12.106

M3 - Conference contribution

AN - SCOPUS:84894483567

VL - 66

SP - 539

EP - 548

BT - Procedia Engineering

ER -