The influence of temperature on the oxide layer formation of aluminized carbon steel

Hishamuddin J H Husain, Abdul Razak Daud, Muhamad Daud, Anasyida Abu Seman, Hafizal Yazid

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Abstract

    The growth of thin oxide layer due to the variation in temperature on the surface of aluminized carbon steel was investigated. Hot dip aluminizing of low carbon steel was carried out at 750 °C in a molten pure aluminum for 5 minutes. Aluminized samples were heat treated at 600 °C, 700 °C, 800 °C, and 900 °C for 1 hour. The formation of aluminum oxide layer was investigated in this study. Optical microscopy, Atomic Force Microscopy (AFM), SEM and EDAX were used in investigation. From the observation, the appearance of aluminum oxide layer increased with the increase in temperature. The result of EDAX analysis revealed the existence alumina phase. Surface roughness measurement showed increment with the increase in oxidation heat treatment temperature.

    Original languageEnglish
    Title of host publicationAdvanced Materials Research
    Pages137-141
    Number of pages5
    Volume620
    DOIs
    Publication statusPublished - 2013
    EventInternational Conference on X-Ray and related Technique in Research and Industry, ICXRI 2012 - Pulau Pinang
    Duration: 3 Jul 20125 Jul 2012

    Publication series

    NameAdvanced Materials Research
    Volume620
    ISSN (Print)10226680

    Other

    OtherInternational Conference on X-Ray and related Technique in Research and Industry, ICXRI 2012
    CityPulau Pinang
    Period3/7/125/7/12

    Fingerprint

    Carbon steel
    Aluminum
    Oxides
    Energy dispersive spectroscopy
    Roughness measurement
    Surface measurement
    Low carbon steel
    Temperature
    Optical microscopy
    Molten materials
    Atomic force microscopy
    Alumina
    Surface roughness
    Heat treatment
    Oxidation
    Scanning electron microscopy
    Hot Temperature

    Keywords

    • Hot dip aluminizing and alumina
    • Low carbon steel

    ASJC Scopus subject areas

    • Engineering(all)

    Cite this

    Husain, H. J. H., Daud, A. R., Daud, M., Seman, A. A., & Yazid, H. (2013). The influence of temperature on the oxide layer formation of aluminized carbon steel. In Advanced Materials Research (Vol. 620, pp. 137-141). (Advanced Materials Research; Vol. 620). https://doi.org/10.4028/www.scientific.net/AMR.620.137

    The influence of temperature on the oxide layer formation of aluminized carbon steel. / Husain, Hishamuddin J H; Daud, Abdul Razak; Daud, Muhamad; Seman, Anasyida Abu; Yazid, Hafizal.

    Advanced Materials Research. Vol. 620 2013. p. 137-141 (Advanced Materials Research; Vol. 620).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Husain, HJH, Daud, AR, Daud, M, Seman, AA & Yazid, H 2013, The influence of temperature on the oxide layer formation of aluminized carbon steel. in Advanced Materials Research. vol. 620, Advanced Materials Research, vol. 620, pp. 137-141, International Conference on X-Ray and related Technique in Research and Industry, ICXRI 2012, Pulau Pinang, 3/7/12. https://doi.org/10.4028/www.scientific.net/AMR.620.137
    Husain HJH, Daud AR, Daud M, Seman AA, Yazid H. The influence of temperature on the oxide layer formation of aluminized carbon steel. In Advanced Materials Research. Vol. 620. 2013. p. 137-141. (Advanced Materials Research). https://doi.org/10.4028/www.scientific.net/AMR.620.137
    Husain, Hishamuddin J H ; Daud, Abdul Razak ; Daud, Muhamad ; Seman, Anasyida Abu ; Yazid, Hafizal. / The influence of temperature on the oxide layer formation of aluminized carbon steel. Advanced Materials Research. Vol. 620 2013. pp. 137-141 (Advanced Materials Research).
    @inproceedings{23c3a908275449b780b5042d2a6fc311,
    title = "The influence of temperature on the oxide layer formation of aluminized carbon steel",
    abstract = "The growth of thin oxide layer due to the variation in temperature on the surface of aluminized carbon steel was investigated. Hot dip aluminizing of low carbon steel was carried out at 750 °C in a molten pure aluminum for 5 minutes. Aluminized samples were heat treated at 600 °C, 700 °C, 800 °C, and 900 °C for 1 hour. The formation of aluminum oxide layer was investigated in this study. Optical microscopy, Atomic Force Microscopy (AFM), SEM and EDAX were used in investigation. From the observation, the appearance of aluminum oxide layer increased with the increase in temperature. The result of EDAX analysis revealed the existence alumina phase. Surface roughness measurement showed increment with the increase in oxidation heat treatment temperature.",
    keywords = "Hot dip aluminizing and alumina, Low carbon steel",
    author = "Husain, {Hishamuddin J H} and Daud, {Abdul Razak} and Muhamad Daud and Seman, {Anasyida Abu} and Hafizal Yazid",
    year = "2013",
    doi = "10.4028/www.scientific.net/AMR.620.137",
    language = "English",
    isbn = "9783037855607",
    volume = "620",
    series = "Advanced Materials Research",
    pages = "137--141",
    booktitle = "Advanced Materials Research",

    }

    TY - GEN

    T1 - The influence of temperature on the oxide layer formation of aluminized carbon steel

    AU - Husain, Hishamuddin J H

    AU - Daud, Abdul Razak

    AU - Daud, Muhamad

    AU - Seman, Anasyida Abu

    AU - Yazid, Hafizal

    PY - 2013

    Y1 - 2013

    N2 - The growth of thin oxide layer due to the variation in temperature on the surface of aluminized carbon steel was investigated. Hot dip aluminizing of low carbon steel was carried out at 750 °C in a molten pure aluminum for 5 minutes. Aluminized samples were heat treated at 600 °C, 700 °C, 800 °C, and 900 °C for 1 hour. The formation of aluminum oxide layer was investigated in this study. Optical microscopy, Atomic Force Microscopy (AFM), SEM and EDAX were used in investigation. From the observation, the appearance of aluminum oxide layer increased with the increase in temperature. The result of EDAX analysis revealed the existence alumina phase. Surface roughness measurement showed increment with the increase in oxidation heat treatment temperature.

    AB - The growth of thin oxide layer due to the variation in temperature on the surface of aluminized carbon steel was investigated. Hot dip aluminizing of low carbon steel was carried out at 750 °C in a molten pure aluminum for 5 minutes. Aluminized samples were heat treated at 600 °C, 700 °C, 800 °C, and 900 °C for 1 hour. The formation of aluminum oxide layer was investigated in this study. Optical microscopy, Atomic Force Microscopy (AFM), SEM and EDAX were used in investigation. From the observation, the appearance of aluminum oxide layer increased with the increase in temperature. The result of EDAX analysis revealed the existence alumina phase. Surface roughness measurement showed increment with the increase in oxidation heat treatment temperature.

    KW - Hot dip aluminizing and alumina

    KW - Low carbon steel

    UR - http://www.scopus.com/inward/record.url?scp=84871857596&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=84871857596&partnerID=8YFLogxK

    U2 - 10.4028/www.scientific.net/AMR.620.137

    DO - 10.4028/www.scientific.net/AMR.620.137

    M3 - Conference contribution

    SN - 9783037855607

    VL - 620

    T3 - Advanced Materials Research

    SP - 137

    EP - 141

    BT - Advanced Materials Research

    ER -