The effects of sintering behavior of zirconiadoped hydroxyapatite for clinical applications

G. P. Cheah, C. Y. Tan, F. Yusof, Andanastuti Muchtar, K. F. Lim, B. K. Yap

Research output: Contribution to journalArticle

Abstract

Hydroxyapatite is one of the most potential bioceramic to be applied into the medical and dental field due to its biocompatibility with human hard tissue. However, its properties are still behind those of hard tissues and further studies need to be done to improve its mechanical properties. In the current work, hydroxyapatite powder was prepared via the wet chemical method. Subsequently, the powder was doped with zirconia with weight percentages of 005, 01, 05, 1 and 5%. The bulks were then sintered at temperatures of 1100, 1200 and 1300°C at atmospheric pressure. The results revealed that the highest relative density of 999% was obtained for samples doped with 01% zirconia when sintered at 1200°C. Nevertheless, samples doped with 5 wt-% of zirconia showed relative lower relative densities regardless of sintering temperature. This was attributed by the presence of secondary phase which has cause decomposition during sintering.

Original languageEnglish
Pages (from-to)S6-151-S6-154
JournalMaterials Research Innovations
Volume18
DOIs
Publication statusPublished - 18 Dec 2014

Fingerprint

Durapatite
Hydroxyapatite
zirconium oxides
Zirconia
sintering
Sintering
Powders
Tissue
Bioceramics
biocompatibility
Biocompatibility
Atmospheric pressure
atmospheric pressure
mechanical properties
Decomposition
decomposition
Mechanical properties
Temperature
temperature
causes

Keywords

  • Composite
  • Density
  • Hydroxyapatite
  • Percent shrinkage
  • Sintering temperature
  • Zirconia

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanical Engineering
  • Mechanics of Materials

Cite this

The effects of sintering behavior of zirconiadoped hydroxyapatite for clinical applications. / Cheah, G. P.; Tan, C. Y.; Yusof, F.; Muchtar, Andanastuti; Lim, K. F.; Yap, B. K.

In: Materials Research Innovations, Vol. 18, 18.12.2014, p. S6-151-S6-154.

Research output: Contribution to journalArticle

Cheah, G. P. ; Tan, C. Y. ; Yusof, F. ; Muchtar, Andanastuti ; Lim, K. F. ; Yap, B. K. / The effects of sintering behavior of zirconiadoped hydroxyapatite for clinical applications. In: Materials Research Innovations. 2014 ; Vol. 18. pp. S6-151-S6-154.
@article{a808e8027bfd40019267ccc53689b27a,
title = "The effects of sintering behavior of zirconiadoped hydroxyapatite for clinical applications",
abstract = "Hydroxyapatite is one of the most potential bioceramic to be applied into the medical and dental field due to its biocompatibility with human hard tissue. However, its properties are still behind those of hard tissues and further studies need to be done to improve its mechanical properties. In the current work, hydroxyapatite powder was prepared via the wet chemical method. Subsequently, the powder was doped with zirconia with weight percentages of 005, 01, 05, 1 and 5{\%}. The bulks were then sintered at temperatures of 1100, 1200 and 1300°C at atmospheric pressure. The results revealed that the highest relative density of 999{\%} was obtained for samples doped with 01{\%} zirconia when sintered at 1200°C. Nevertheless, samples doped with 5 wt-{\%} of zirconia showed relative lower relative densities regardless of sintering temperature. This was attributed by the presence of secondary phase which has cause decomposition during sintering.",
keywords = "Composite, Density, Hydroxyapatite, Percent shrinkage, Sintering temperature, Zirconia",
author = "Cheah, {G. P.} and Tan, {C. Y.} and F. Yusof and Andanastuti Muchtar and Lim, {K. F.} and Yap, {B. K.}",
year = "2014",
month = "12",
day = "18",
doi = "10.1179/1432891714Z.000000000948",
language = "English",
volume = "18",
pages = "S6--151--S6--154",
journal = "Materials Research Innovations",
issn = "1432-8917",
publisher = "Maney Publishing",

}

TY - JOUR

T1 - The effects of sintering behavior of zirconiadoped hydroxyapatite for clinical applications

AU - Cheah, G. P.

AU - Tan, C. Y.

AU - Yusof, F.

AU - Muchtar, Andanastuti

AU - Lim, K. F.

AU - Yap, B. K.

PY - 2014/12/18

Y1 - 2014/12/18

N2 - Hydroxyapatite is one of the most potential bioceramic to be applied into the medical and dental field due to its biocompatibility with human hard tissue. However, its properties are still behind those of hard tissues and further studies need to be done to improve its mechanical properties. In the current work, hydroxyapatite powder was prepared via the wet chemical method. Subsequently, the powder was doped with zirconia with weight percentages of 005, 01, 05, 1 and 5%. The bulks were then sintered at temperatures of 1100, 1200 and 1300°C at atmospheric pressure. The results revealed that the highest relative density of 999% was obtained for samples doped with 01% zirconia when sintered at 1200°C. Nevertheless, samples doped with 5 wt-% of zirconia showed relative lower relative densities regardless of sintering temperature. This was attributed by the presence of secondary phase which has cause decomposition during sintering.

AB - Hydroxyapatite is one of the most potential bioceramic to be applied into the medical and dental field due to its biocompatibility with human hard tissue. However, its properties are still behind those of hard tissues and further studies need to be done to improve its mechanical properties. In the current work, hydroxyapatite powder was prepared via the wet chemical method. Subsequently, the powder was doped with zirconia with weight percentages of 005, 01, 05, 1 and 5%. The bulks were then sintered at temperatures of 1100, 1200 and 1300°C at atmospheric pressure. The results revealed that the highest relative density of 999% was obtained for samples doped with 01% zirconia when sintered at 1200°C. Nevertheless, samples doped with 5 wt-% of zirconia showed relative lower relative densities regardless of sintering temperature. This was attributed by the presence of secondary phase which has cause decomposition during sintering.

KW - Composite

KW - Density

KW - Hydroxyapatite

KW - Percent shrinkage

KW - Sintering temperature

KW - Zirconia

UR - http://www.scopus.com/inward/record.url?scp=84918767769&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84918767769&partnerID=8YFLogxK

U2 - 10.1179/1432891714Z.000000000948

DO - 10.1179/1432891714Z.000000000948

M3 - Article

AN - SCOPUS:84918767769

VL - 18

SP - S6-151-S6-154

JO - Materials Research Innovations

JF - Materials Research Innovations

SN - 1432-8917

ER -