Test simulation using finite element method

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The dynamic responses of the standard Charpy impact machine are experimentally studied using the relevant data acquisition system, for the purpose of obtaining the impact response. For this reason, the numerical analysis by means of the finite element method has been used for experiment findings. Modelling of the charpy test was performed in order to obtain strain in the striker during the test. Two types of standard charpy specimens fabricated from different materials, i.e. aluminium 6061 and low carbon steel 1050, were used for the impact simulation testing. The related parameters on between different materials, energy absorbed, strain signal, power spectrum density (PSD) and the relationship between those parameters was finally correlated and discussed.

Original languageEnglish
Title of host publicationIOP Conference Series: Materials Science and Engineering
Volume17
Edition1
DOIs
Publication statusPublished - 2011
EventConference on Advanced Materials and Nanotechnology, CAMAN 2009 - Kuala Lumpur, Malaysia
Duration: 3 Nov 20095 Nov 2009

Other

OtherConference on Advanced Materials and Nanotechnology, CAMAN 2009
CountryMalaysia
CityKuala Lumpur
Period3/11/095/11/09

Fingerprint

Finite element method
Low carbon steel
Strain energy
Power spectrum
Aluminum
Dynamic response
Numerical analysis
Data acquisition
Testing
Experiments

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Cite this

Ali, M. B., Abdullah, S., Nuawi, M. Z., & Mohd Ihsan, A. K. A. (2011). Test simulation using finite element method. In IOP Conference Series: Materials Science and Engineering (1 ed., Vol. 17). [012013] https://doi.org/10.1088/1757-899X/17/1/012013

Test simulation using finite element method. / Ali, M. B.; Abdullah, S.; Nuawi, Mohd. Zaki; Mohd Ihsan, Ahmad Kamal Ariffin.

IOP Conference Series: Materials Science and Engineering. Vol. 17 1. ed. 2011. 012013.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ali, MB, Abdullah, S, Nuawi, MZ & Mohd Ihsan, AKA 2011, Test simulation using finite element method. in IOP Conference Series: Materials Science and Engineering. 1 edn, vol. 17, 012013, Conference on Advanced Materials and Nanotechnology, CAMAN 2009, Kuala Lumpur, Malaysia, 3/11/09. https://doi.org/10.1088/1757-899X/17/1/012013
Ali MB, Abdullah S, Nuawi MZ, Mohd Ihsan AKA. Test simulation using finite element method. In IOP Conference Series: Materials Science and Engineering. 1 ed. Vol. 17. 2011. 012013 https://doi.org/10.1088/1757-899X/17/1/012013
Ali, M. B. ; Abdullah, S. ; Nuawi, Mohd. Zaki ; Mohd Ihsan, Ahmad Kamal Ariffin. / Test simulation using finite element method. IOP Conference Series: Materials Science and Engineering. Vol. 17 1. ed. 2011.
@inproceedings{fc2d68fb814449c991193441a304f065,
title = "Test simulation using finite element method",
abstract = "The dynamic responses of the standard Charpy impact machine are experimentally studied using the relevant data acquisition system, for the purpose of obtaining the impact response. For this reason, the numerical analysis by means of the finite element method has been used for experiment findings. Modelling of the charpy test was performed in order to obtain strain in the striker during the test. Two types of standard charpy specimens fabricated from different materials, i.e. aluminium 6061 and low carbon steel 1050, were used for the impact simulation testing. The related parameters on between different materials, energy absorbed, strain signal, power spectrum density (PSD) and the relationship between those parameters was finally correlated and discussed.",
author = "Ali, {M. B.} and S. Abdullah and Nuawi, {Mohd. Zaki} and {Mohd Ihsan}, {Ahmad Kamal Ariffin}",
year = "2011",
doi = "10.1088/1757-899X/17/1/012013",
language = "English",
volume = "17",
booktitle = "IOP Conference Series: Materials Science and Engineering",
edition = "1",

}

TY - GEN

T1 - Test simulation using finite element method

AU - Ali, M. B.

AU - Abdullah, S.

AU - Nuawi, Mohd. Zaki

AU - Mohd Ihsan, Ahmad Kamal Ariffin

PY - 2011

Y1 - 2011

N2 - The dynamic responses of the standard Charpy impact machine are experimentally studied using the relevant data acquisition system, for the purpose of obtaining the impact response. For this reason, the numerical analysis by means of the finite element method has been used for experiment findings. Modelling of the charpy test was performed in order to obtain strain in the striker during the test. Two types of standard charpy specimens fabricated from different materials, i.e. aluminium 6061 and low carbon steel 1050, were used for the impact simulation testing. The related parameters on between different materials, energy absorbed, strain signal, power spectrum density (PSD) and the relationship between those parameters was finally correlated and discussed.

AB - The dynamic responses of the standard Charpy impact machine are experimentally studied using the relevant data acquisition system, for the purpose of obtaining the impact response. For this reason, the numerical analysis by means of the finite element method has been used for experiment findings. Modelling of the charpy test was performed in order to obtain strain in the striker during the test. Two types of standard charpy specimens fabricated from different materials, i.e. aluminium 6061 and low carbon steel 1050, were used for the impact simulation testing. The related parameters on between different materials, energy absorbed, strain signal, power spectrum density (PSD) and the relationship between those parameters was finally correlated and discussed.

UR - http://www.scopus.com/inward/record.url?scp=79952645526&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=79952645526&partnerID=8YFLogxK

U2 - 10.1088/1757-899X/17/1/012013

DO - 10.1088/1757-899X/17/1/012013

M3 - Conference contribution

VL - 17

BT - IOP Conference Series: Materials Science and Engineering

ER -