Temperature dependences on various types of Photovoltaic (PV) panel

I. A. Audwinto, C. S. Leong, Kamaruzzaman Sopian, Saleem H. Zaidi

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Abstract

Temperature is one of the key roles in PV technology performance, since with the increases of temperature the open-circuit voltage will drop accordingly so do the electrical efficiency and power output generation. Different types of Photovoltaic (PV) panels: silicon solar panels and thin film solar panels; mono-crystalline, poly-crystalline, CIS, CIGS, CdTe, back-contact, and bi-facial solar panel under 40°C to 70°C approximately with 5°C interval have been comparatively analyzed their actual performances with uniformly distribution of light illumination from tungsten halogen light source, ±500W/m2. DC-Electronic Load and Data Logger devices with "Lab View" data program interface were used to collect all the necessary parameters in this study. Time needed to achieve a certain degree of temperature was recorded. Generally, each of the panels needed 15 minutes to 20 minutes to reach 70°C. Halogen based light source is not compatible in short wave-length in response to thin-film solar cell. Within this period of times, all the panels are facing a performance loss up to 15%. Other parameters; Pmax, Vmax, Imax, Voc, Isc, Rserries, Rshunt, Fillfactor were collected as study cases. Our study is important in determining Photovoltaic type selection and system design as for study or industrial needed under different temperature condition.

Original languageEnglish
Title of host publicationIOP Conference Series: Materials Science and Engineering
PublisherInstitute of Physics Publishing
Volume88
Edition1
DOIs
Publication statusPublished - 21 Sep 2015
Event7th International Conference on Cooling and Heating Technologies, ICCHT 2014 - Subang Jaya, Selangor Darul Ehsan, Malaysia
Duration: 4 Nov 20146 Nov 2014

Other

Other7th International Conference on Cooling and Heating Technologies, ICCHT 2014
CountryMalaysia
CitySubang Jaya, Selangor Darul Ehsan
Period4/11/146/11/14

Fingerprint

Halogens
Light sources
Crystalline materials
Temperature
Tungsten
Silicon
Open circuit voltage
Lighting
Systems analysis
Thin films
Wavelength
Voltage drop
Thin film solar cells

ASJC Scopus subject areas

  • Engineering(all)
  • Materials Science(all)

Cite this

Audwinto, I. A., Leong, C. S., Sopian, K., & Zaidi, S. H. (2015). Temperature dependences on various types of Photovoltaic (PV) panel. In IOP Conference Series: Materials Science and Engineering (1 ed., Vol. 88). [012066] Institute of Physics Publishing. https://doi.org/10.1088/1757-899X/88/1/012066

Temperature dependences on various types of Photovoltaic (PV) panel. / Audwinto, I. A.; Leong, C. S.; Sopian, Kamaruzzaman; Zaidi, Saleem H.

IOP Conference Series: Materials Science and Engineering. Vol. 88 1. ed. Institute of Physics Publishing, 2015. 012066.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Audwinto, IA, Leong, CS, Sopian, K & Zaidi, SH 2015, Temperature dependences on various types of Photovoltaic (PV) panel. in IOP Conference Series: Materials Science and Engineering. 1 edn, vol. 88, 012066, Institute of Physics Publishing, 7th International Conference on Cooling and Heating Technologies, ICCHT 2014, Subang Jaya, Selangor Darul Ehsan, Malaysia, 4/11/14. https://doi.org/10.1088/1757-899X/88/1/012066
Audwinto IA, Leong CS, Sopian K, Zaidi SH. Temperature dependences on various types of Photovoltaic (PV) panel. In IOP Conference Series: Materials Science and Engineering. 1 ed. Vol. 88. Institute of Physics Publishing. 2015. 012066 https://doi.org/10.1088/1757-899X/88/1/012066
Audwinto, I. A. ; Leong, C. S. ; Sopian, Kamaruzzaman ; Zaidi, Saleem H. / Temperature dependences on various types of Photovoltaic (PV) panel. IOP Conference Series: Materials Science and Engineering. Vol. 88 1. ed. Institute of Physics Publishing, 2015.
@inproceedings{e693b6118be84b3a8720be34ffedf393,
title = "Temperature dependences on various types of Photovoltaic (PV) panel",
abstract = "Temperature is one of the key roles in PV technology performance, since with the increases of temperature the open-circuit voltage will drop accordingly so do the electrical efficiency and power output generation. Different types of Photovoltaic (PV) panels: silicon solar panels and thin film solar panels; mono-crystalline, poly-crystalline, CIS, CIGS, CdTe, back-contact, and bi-facial solar panel under 40°C to 70°C approximately with 5°C interval have been comparatively analyzed their actual performances with uniformly distribution of light illumination from tungsten halogen light source, ±500W/m2. DC-Electronic Load and Data Logger devices with {"}Lab View{"} data program interface were used to collect all the necessary parameters in this study. Time needed to achieve a certain degree of temperature was recorded. Generally, each of the panels needed 15 minutes to 20 minutes to reach 70°C. Halogen based light source is not compatible in short wave-length in response to thin-film solar cell. Within this period of times, all the panels are facing a performance loss up to 15{\%}. Other parameters; Pmax, Vmax, Imax, Voc, Isc, Rserries, Rshunt, Fillfactor were collected as study cases. Our study is important in determining Photovoltaic type selection and system design as for study or industrial needed under different temperature condition.",
author = "Audwinto, {I. A.} and Leong, {C. S.} and Kamaruzzaman Sopian and Zaidi, {Saleem H.}",
year = "2015",
month = "9",
day = "21",
doi = "10.1088/1757-899X/88/1/012066",
language = "English",
volume = "88",
booktitle = "IOP Conference Series: Materials Science and Engineering",
publisher = "Institute of Physics Publishing",
edition = "1",

}

TY - GEN

T1 - Temperature dependences on various types of Photovoltaic (PV) panel

AU - Audwinto, I. A.

AU - Leong, C. S.

AU - Sopian, Kamaruzzaman

AU - Zaidi, Saleem H.

PY - 2015/9/21

Y1 - 2015/9/21

N2 - Temperature is one of the key roles in PV technology performance, since with the increases of temperature the open-circuit voltage will drop accordingly so do the electrical efficiency and power output generation. Different types of Photovoltaic (PV) panels: silicon solar panels and thin film solar panels; mono-crystalline, poly-crystalline, CIS, CIGS, CdTe, back-contact, and bi-facial solar panel under 40°C to 70°C approximately with 5°C interval have been comparatively analyzed their actual performances with uniformly distribution of light illumination from tungsten halogen light source, ±500W/m2. DC-Electronic Load and Data Logger devices with "Lab View" data program interface were used to collect all the necessary parameters in this study. Time needed to achieve a certain degree of temperature was recorded. Generally, each of the panels needed 15 minutes to 20 minutes to reach 70°C. Halogen based light source is not compatible in short wave-length in response to thin-film solar cell. Within this period of times, all the panels are facing a performance loss up to 15%. Other parameters; Pmax, Vmax, Imax, Voc, Isc, Rserries, Rshunt, Fillfactor were collected as study cases. Our study is important in determining Photovoltaic type selection and system design as for study or industrial needed under different temperature condition.

AB - Temperature is one of the key roles in PV technology performance, since with the increases of temperature the open-circuit voltage will drop accordingly so do the electrical efficiency and power output generation. Different types of Photovoltaic (PV) panels: silicon solar panels and thin film solar panels; mono-crystalline, poly-crystalline, CIS, CIGS, CdTe, back-contact, and bi-facial solar panel under 40°C to 70°C approximately with 5°C interval have been comparatively analyzed their actual performances with uniformly distribution of light illumination from tungsten halogen light source, ±500W/m2. DC-Electronic Load and Data Logger devices with "Lab View" data program interface were used to collect all the necessary parameters in this study. Time needed to achieve a certain degree of temperature was recorded. Generally, each of the panels needed 15 minutes to 20 minutes to reach 70°C. Halogen based light source is not compatible in short wave-length in response to thin-film solar cell. Within this period of times, all the panels are facing a performance loss up to 15%. Other parameters; Pmax, Vmax, Imax, Voc, Isc, Rserries, Rshunt, Fillfactor were collected as study cases. Our study is important in determining Photovoltaic type selection and system design as for study or industrial needed under different temperature condition.

UR - http://www.scopus.com/inward/record.url?scp=84948423508&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84948423508&partnerID=8YFLogxK

U2 - 10.1088/1757-899X/88/1/012066

DO - 10.1088/1757-899X/88/1/012066

M3 - Conference contribution

AN - SCOPUS:84948423508

VL - 88

BT - IOP Conference Series: Materials Science and Engineering

PB - Institute of Physics Publishing

ER -