Synthesis of calcium ferrite nanoparticles (CaFe2O4-NPs) using auto-combustion method for targeted drug delivery

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

In this paper, we report the synthesis process development of calcium ferrite nanoparticles (CaFe2O4 NPs) using auto-combustion method. The process started by mixing the calcium nitrate Ca(NO2)3 and ferric nitrate Fe(NO3)3 dissolved in 150mL of distilled water with an addition of citric acid as a chelating agent. The mixture was synthesized through sol-gel combustion method and then calcined at 550°C to obtain powders. The crystalline structure and surface morphology of CaFe2O4 NPs were observed and characterized by using XRD and FESEM measurement, while the magnetic property of the synthesize particles was analyzed by using VSM. Analysis results through XRD showed that an orthorhombic structure of calcium ferrite NPs was observed. The analysis using the transmission electron microscopy (FESEM) and VSM measurement showed that the particle size of CaFe2O4 nanoparticles ranging from 5 to 20 nm was obtained. While the magnetic saturation (Ms) was 31.1emu/g for auto-combustion method with good magnetic properties. The magnetic property of the synthesized particles was also compared with that synthesized using a standard sol-gel method. This work will give important information about an alternative technique to synthesize the Calcium Ferrite magnetic nanoparticles used for targeted drug delivery application.

Original languageEnglish
Title of host publicationKey Engineering Materials VIII
EditorsChobin Makabe, Alexander M. Korsunsky, Emma Wang
PublisherTrans Tech Publications Ltd
Pages115-119
Number of pages5
ISBN (Print)9783035713046
DOIs
Publication statusPublished - 1 Jan 2018
Event8th International Conference on Key Engineering Materials, ICKEM 2018 - Osaka, Japan
Duration: 16 Mar 201818 Mar 2018

Publication series

NameKey Engineering Materials
Volume775 KEM
ISSN (Print)1013-9826

Other

Other8th International Conference on Key Engineering Materials, ICKEM 2018
CountryJapan
CityOsaka
Period16/3/1818/3/18

Fingerprint

Ferrite
Calcium
Magnetic properties
Nanoparticles
Nitrates
Saturation magnetization
Chelating Agents
Citric Acid
Powders
Sol-gel process
Sol-gels
Surface morphology
Citric acid
Chelation
Particle size
Crystalline materials
Transmission electron microscopy
Water
Targeted drug delivery
calcium nitrate

Keywords

  • Auto-combustion
  • CaFeO
  • Magnetic nanoparticles
  • Sol-gel method
  • Synthesis

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Yunas, J., Noor Humam, S., & Ghazali, M. J. (2018). Synthesis of calcium ferrite nanoparticles (CaFe2O4-NPs) using auto-combustion method for targeted drug delivery. In C. Makabe, A. M. Korsunsky, & E. Wang (Eds.), Key Engineering Materials VIII (pp. 115-119). (Key Engineering Materials; Vol. 775 KEM). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/KEM.775.115

Synthesis of calcium ferrite nanoparticles (CaFe2O4-NPs) using auto-combustion method for targeted drug delivery. / Yunas, Jumril; Noor Humam, Sulaiman; Ghazali, Mariyam Jameelah.

Key Engineering Materials VIII. ed. / Chobin Makabe; Alexander M. Korsunsky; Emma Wang. Trans Tech Publications Ltd, 2018. p. 115-119 (Key Engineering Materials; Vol. 775 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Yunas, J, Noor Humam, S & Ghazali, MJ 2018, Synthesis of calcium ferrite nanoparticles (CaFe2O4-NPs) using auto-combustion method for targeted drug delivery. in C Makabe, AM Korsunsky & E Wang (eds), Key Engineering Materials VIII. Key Engineering Materials, vol. 775 KEM, Trans Tech Publications Ltd, pp. 115-119, 8th International Conference on Key Engineering Materials, ICKEM 2018, Osaka, Japan, 16/3/18. https://doi.org/10.4028/www.scientific.net/KEM.775.115
Yunas J, Noor Humam S, Ghazali MJ. Synthesis of calcium ferrite nanoparticles (CaFe2O4-NPs) using auto-combustion method for targeted drug delivery. In Makabe C, Korsunsky AM, Wang E, editors, Key Engineering Materials VIII. Trans Tech Publications Ltd. 2018. p. 115-119. (Key Engineering Materials). https://doi.org/10.4028/www.scientific.net/KEM.775.115
Yunas, Jumril ; Noor Humam, Sulaiman ; Ghazali, Mariyam Jameelah. / Synthesis of calcium ferrite nanoparticles (CaFe2O4-NPs) using auto-combustion method for targeted drug delivery. Key Engineering Materials VIII. editor / Chobin Makabe ; Alexander M. Korsunsky ; Emma Wang. Trans Tech Publications Ltd, 2018. pp. 115-119 (Key Engineering Materials).
@inproceedings{880aa69b292b459ca2bf517fc9277dce,
title = "Synthesis of calcium ferrite nanoparticles (CaFe2O4-NPs) using auto-combustion method for targeted drug delivery",
abstract = "In this paper, we report the synthesis process development of calcium ferrite nanoparticles (CaFe2O4 NPs) using auto-combustion method. The process started by mixing the calcium nitrate Ca(NO2)3 and ferric nitrate Fe(NO3)3 dissolved in 150mL of distilled water with an addition of citric acid as a chelating agent. The mixture was synthesized through sol-gel combustion method and then calcined at 550°C to obtain powders. The crystalline structure and surface morphology of CaFe2O4 NPs were observed and characterized by using XRD and FESEM measurement, while the magnetic property of the synthesize particles was analyzed by using VSM. Analysis results through XRD showed that an orthorhombic structure of calcium ferrite NPs was observed. The analysis using the transmission electron microscopy (FESEM) and VSM measurement showed that the particle size of CaFe2O4 nanoparticles ranging from 5 to 20 nm was obtained. While the magnetic saturation (Ms) was 31.1emu/g for auto-combustion method with good magnetic properties. The magnetic property of the synthesized particles was also compared with that synthesized using a standard sol-gel method. This work will give important information about an alternative technique to synthesize the Calcium Ferrite magnetic nanoparticles used for targeted drug delivery application.",
keywords = "Auto-combustion, CaFeO, Magnetic nanoparticles, Sol-gel method, Synthesis",
author = "Jumril Yunas and {Noor Humam}, Sulaiman and Ghazali, {Mariyam Jameelah}",
year = "2018",
month = "1",
day = "1",
doi = "10.4028/www.scientific.net/KEM.775.115",
language = "English",
isbn = "9783035713046",
series = "Key Engineering Materials",
publisher = "Trans Tech Publications Ltd",
pages = "115--119",
editor = "Chobin Makabe and Korsunsky, {Alexander M.} and Emma Wang",
booktitle = "Key Engineering Materials VIII",

}

TY - GEN

T1 - Synthesis of calcium ferrite nanoparticles (CaFe2O4-NPs) using auto-combustion method for targeted drug delivery

AU - Yunas, Jumril

AU - Noor Humam, Sulaiman

AU - Ghazali, Mariyam Jameelah

PY - 2018/1/1

Y1 - 2018/1/1

N2 - In this paper, we report the synthesis process development of calcium ferrite nanoparticles (CaFe2O4 NPs) using auto-combustion method. The process started by mixing the calcium nitrate Ca(NO2)3 and ferric nitrate Fe(NO3)3 dissolved in 150mL of distilled water with an addition of citric acid as a chelating agent. The mixture was synthesized through sol-gel combustion method and then calcined at 550°C to obtain powders. The crystalline structure and surface morphology of CaFe2O4 NPs were observed and characterized by using XRD and FESEM measurement, while the magnetic property of the synthesize particles was analyzed by using VSM. Analysis results through XRD showed that an orthorhombic structure of calcium ferrite NPs was observed. The analysis using the transmission electron microscopy (FESEM) and VSM measurement showed that the particle size of CaFe2O4 nanoparticles ranging from 5 to 20 nm was obtained. While the magnetic saturation (Ms) was 31.1emu/g for auto-combustion method with good magnetic properties. The magnetic property of the synthesized particles was also compared with that synthesized using a standard sol-gel method. This work will give important information about an alternative technique to synthesize the Calcium Ferrite magnetic nanoparticles used for targeted drug delivery application.

AB - In this paper, we report the synthesis process development of calcium ferrite nanoparticles (CaFe2O4 NPs) using auto-combustion method. The process started by mixing the calcium nitrate Ca(NO2)3 and ferric nitrate Fe(NO3)3 dissolved in 150mL of distilled water with an addition of citric acid as a chelating agent. The mixture was synthesized through sol-gel combustion method and then calcined at 550°C to obtain powders. The crystalline structure and surface morphology of CaFe2O4 NPs were observed and characterized by using XRD and FESEM measurement, while the magnetic property of the synthesize particles was analyzed by using VSM. Analysis results through XRD showed that an orthorhombic structure of calcium ferrite NPs was observed. The analysis using the transmission electron microscopy (FESEM) and VSM measurement showed that the particle size of CaFe2O4 nanoparticles ranging from 5 to 20 nm was obtained. While the magnetic saturation (Ms) was 31.1emu/g for auto-combustion method with good magnetic properties. The magnetic property of the synthesized particles was also compared with that synthesized using a standard sol-gel method. This work will give important information about an alternative technique to synthesize the Calcium Ferrite magnetic nanoparticles used for targeted drug delivery application.

KW - Auto-combustion

KW - CaFeO

KW - Magnetic nanoparticles

KW - Sol-gel method

KW - Synthesis

UR - http://www.scopus.com/inward/record.url?scp=85053176465&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85053176465&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/KEM.775.115

DO - 10.4028/www.scientific.net/KEM.775.115

M3 - Conference contribution

SN - 9783035713046

T3 - Key Engineering Materials

SP - 115

EP - 119

BT - Key Engineering Materials VIII

A2 - Makabe, Chobin

A2 - Korsunsky, Alexander M.

A2 - Wang, Emma

PB - Trans Tech Publications Ltd

ER -