Surfactant assisted electrodeposition of nanostructured CoNiCu alloys

I. Hanafi, A. R. Daud, Shahidan Radiman, M. H A Ghani, S. Budi

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

In order to obtain a desirable deposition thickness, nanostructured ternary CoNiCu alloys have been electrodeposited from salt solutions containing Co 2+, Ni2+ and Cu2+ in the presence of a neutral surfactant alkyl polyglucoside (APG). Electrodeposition of CoNiCu was carried out in a three-electrode cell with indium-tin oxide (ITO) on glass plate, platinum wire and saturated calomel electrode (SCE) as working electrode, counter electrode and reference electrode, respectively. The nanostructured alloys were characterized by means of atomic force microscopy (AFM) and supported by field emission scanning electron microscopy (FESEM). The nanostructured CoNiCu alloys prepared in sulphate solutions in the presence of APG produced a thinner layer of nanoparticles of the alloys compared with the one deposited in the absence of APG. For a fixed deposition time, 160s and at an applied potential of - 875mV (SCE) the layer thickness was about 56 nm for electrodepositionin the presence of 3.25 wt.% APG and about 110 nm without APG. Only a small increase in thickness was observed when the potential was increased to more negative values i.e. - 875 to - 950 mV(SCE).

Original languageEnglish
Article number012013
JournalJournal of Physics: Conference Series
Volume431
Issue number1
DOIs
Publication statusPublished - 2013

Fingerprint

electrodeposition
surfactants
electrodes
ternary alloys
indium oxides
tin oxides
field emission
sulfates
counters
platinum
atomic force microscopy
wire
salts
nanoparticles
scanning electron microscopy
glass
cells

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Cite this

Surfactant assisted electrodeposition of nanostructured CoNiCu alloys. / Hanafi, I.; Daud, A. R.; Radiman, Shahidan; Ghani, M. H A; Budi, S.

In: Journal of Physics: Conference Series, Vol. 431, No. 1, 012013, 2013.

Research output: Contribution to journalArticle

Hanafi, I. ; Daud, A. R. ; Radiman, Shahidan ; Ghani, M. H A ; Budi, S. / Surfactant assisted electrodeposition of nanostructured CoNiCu alloys. In: Journal of Physics: Conference Series. 2013 ; Vol. 431, No. 1.
@article{278eb26c404444fca7b6ff0efab337f9,
title = "Surfactant assisted electrodeposition of nanostructured CoNiCu alloys",
abstract = "In order to obtain a desirable deposition thickness, nanostructured ternary CoNiCu alloys have been electrodeposited from salt solutions containing Co 2+, Ni2+ and Cu2+ in the presence of a neutral surfactant alkyl polyglucoside (APG). Electrodeposition of CoNiCu was carried out in a three-electrode cell with indium-tin oxide (ITO) on glass plate, platinum wire and saturated calomel electrode (SCE) as working electrode, counter electrode and reference electrode, respectively. The nanostructured alloys were characterized by means of atomic force microscopy (AFM) and supported by field emission scanning electron microscopy (FESEM). The nanostructured CoNiCu alloys prepared in sulphate solutions in the presence of APG produced a thinner layer of nanoparticles of the alloys compared with the one deposited in the absence of APG. For a fixed deposition time, 160s and at an applied potential of - 875mV (SCE) the layer thickness was about 56 nm for electrodepositionin the presence of 3.25 wt.{\%} APG and about 110 nm without APG. Only a small increase in thickness was observed when the potential was increased to more negative values i.e. - 875 to - 950 mV(SCE).",
author = "I. Hanafi and Daud, {A. R.} and Shahidan Radiman and Ghani, {M. H A} and S. Budi",
year = "2013",
doi = "10.1088/1742-6596/431/1/012013",
language = "English",
volume = "431",
journal = "Journal of Physics: Conference Series",
issn = "1742-6588",
publisher = "IOP Publishing Ltd.",
number = "1",

}

TY - JOUR

T1 - Surfactant assisted electrodeposition of nanostructured CoNiCu alloys

AU - Hanafi, I.

AU - Daud, A. R.

AU - Radiman, Shahidan

AU - Ghani, M. H A

AU - Budi, S.

PY - 2013

Y1 - 2013

N2 - In order to obtain a desirable deposition thickness, nanostructured ternary CoNiCu alloys have been electrodeposited from salt solutions containing Co 2+, Ni2+ and Cu2+ in the presence of a neutral surfactant alkyl polyglucoside (APG). Electrodeposition of CoNiCu was carried out in a three-electrode cell with indium-tin oxide (ITO) on glass plate, platinum wire and saturated calomel electrode (SCE) as working electrode, counter electrode and reference electrode, respectively. The nanostructured alloys were characterized by means of atomic force microscopy (AFM) and supported by field emission scanning electron microscopy (FESEM). The nanostructured CoNiCu alloys prepared in sulphate solutions in the presence of APG produced a thinner layer of nanoparticles of the alloys compared with the one deposited in the absence of APG. For a fixed deposition time, 160s and at an applied potential of - 875mV (SCE) the layer thickness was about 56 nm for electrodepositionin the presence of 3.25 wt.% APG and about 110 nm without APG. Only a small increase in thickness was observed when the potential was increased to more negative values i.e. - 875 to - 950 mV(SCE).

AB - In order to obtain a desirable deposition thickness, nanostructured ternary CoNiCu alloys have been electrodeposited from salt solutions containing Co 2+, Ni2+ and Cu2+ in the presence of a neutral surfactant alkyl polyglucoside (APG). Electrodeposition of CoNiCu was carried out in a three-electrode cell with indium-tin oxide (ITO) on glass plate, platinum wire and saturated calomel electrode (SCE) as working electrode, counter electrode and reference electrode, respectively. The nanostructured alloys were characterized by means of atomic force microscopy (AFM) and supported by field emission scanning electron microscopy (FESEM). The nanostructured CoNiCu alloys prepared in sulphate solutions in the presence of APG produced a thinner layer of nanoparticles of the alloys compared with the one deposited in the absence of APG. For a fixed deposition time, 160s and at an applied potential of - 875mV (SCE) the layer thickness was about 56 nm for electrodepositionin the presence of 3.25 wt.% APG and about 110 nm without APG. Only a small increase in thickness was observed when the potential was increased to more negative values i.e. - 875 to - 950 mV(SCE).

UR - http://www.scopus.com/inward/record.url?scp=84876908459&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84876908459&partnerID=8YFLogxK

U2 - 10.1088/1742-6596/431/1/012013

DO - 10.1088/1742-6596/431/1/012013

M3 - Article

AN - SCOPUS:84876908459

VL - 431

JO - Journal of Physics: Conference Series

JF - Journal of Physics: Conference Series

SN - 1742-6588

IS - 1

M1 - 012013

ER -