Surface roughness prediction model of 6061-T6 aluminium alloy machining using statistical method

K. Kadirgama, M. M. Noor, M. M. Rahman, M. R M Rejab, Che Hassan Che Haron, K. A. Abou-El-Hossein

Research output: Contribution to journalArticle

33 Citations (Scopus)

Abstract

This paper explores on the optimization of the surface roughness of milling mould 6061-T6 aluminium alloys with carbide coated inserts. Optimization of the milling is very important to reduce the cost and time for machining mould. The purposes of this study are to develop the predicting model of surface roughness, to investigate the most dominant variables among the cutting speed, feed rate, axial depth and radial depth and to optimize the parameters. Response surface method based optimization approach was used in this study. It can be seen from the first order model that the feed rate is the most significantly influencing factor for the surface roughness. Second-order model reveals that there is no interaction between the variables and response.

Original languageEnglish
Pages (from-to)250-256
Number of pages7
JournalEuropean Journal of Scientific Research
Volume25
Issue number2
Publication statusPublished - 2009

Fingerprint

surface roughness
Aluminum Alloy
Surface Roughness
Aluminum
Machining
Prediction Model
Statistical method
aluminum
Aluminum alloys
Statistical methods
Fungi
statistical analysis
Surface roughness
prediction
Optimization
carbides
Response Surface Method
Second-order Model
Costs and Cost Analysis
Carbides

Keywords

  • Aluminium alloys
  • Machining
  • Response surface method
  • Surface roughness

ASJC Scopus subject areas

  • General

Cite this

Kadirgama, K., Noor, M. M., Rahman, M. M., Rejab, M. R. M., Che Haron, C. H., & Abou-El-Hossein, K. A. (2009). Surface roughness prediction model of 6061-T6 aluminium alloy machining using statistical method. European Journal of Scientific Research, 25(2), 250-256.

Surface roughness prediction model of 6061-T6 aluminium alloy machining using statistical method. / Kadirgama, K.; Noor, M. M.; Rahman, M. M.; Rejab, M. R M; Che Haron, Che Hassan; Abou-El-Hossein, K. A.

In: European Journal of Scientific Research, Vol. 25, No. 2, 2009, p. 250-256.

Research output: Contribution to journalArticle

Kadirgama, K, Noor, MM, Rahman, MM, Rejab, MRM, Che Haron, CH & Abou-El-Hossein, KA 2009, 'Surface roughness prediction model of 6061-T6 aluminium alloy machining using statistical method', European Journal of Scientific Research, vol. 25, no. 2, pp. 250-256.
Kadirgama, K. ; Noor, M. M. ; Rahman, M. M. ; Rejab, M. R M ; Che Haron, Che Hassan ; Abou-El-Hossein, K. A. / Surface roughness prediction model of 6061-T6 aluminium alloy machining using statistical method. In: European Journal of Scientific Research. 2009 ; Vol. 25, No. 2. pp. 250-256.
@article{e7bbdfd7c4984b1486d7b6e0fbe365f2,
title = "Surface roughness prediction model of 6061-T6 aluminium alloy machining using statistical method",
abstract = "This paper explores on the optimization of the surface roughness of milling mould 6061-T6 aluminium alloys with carbide coated inserts. Optimization of the milling is very important to reduce the cost and time for machining mould. The purposes of this study are to develop the predicting model of surface roughness, to investigate the most dominant variables among the cutting speed, feed rate, axial depth and radial depth and to optimize the parameters. Response surface method based optimization approach was used in this study. It can be seen from the first order model that the feed rate is the most significantly influencing factor for the surface roughness. Second-order model reveals that there is no interaction between the variables and response.",
keywords = "Aluminium alloys, Machining, Response surface method, Surface roughness",
author = "K. Kadirgama and Noor, {M. M.} and Rahman, {M. M.} and Rejab, {M. R M} and {Che Haron}, {Che Hassan} and Abou-El-Hossein, {K. A.}",
year = "2009",
language = "English",
volume = "25",
pages = "250--256",
journal = "European Journal of Scientific Research",
issn = "1450-202X",
publisher = "European Journals Inc.",
number = "2",

}

TY - JOUR

T1 - Surface roughness prediction model of 6061-T6 aluminium alloy machining using statistical method

AU - Kadirgama, K.

AU - Noor, M. M.

AU - Rahman, M. M.

AU - Rejab, M. R M

AU - Che Haron, Che Hassan

AU - Abou-El-Hossein, K. A.

PY - 2009

Y1 - 2009

N2 - This paper explores on the optimization of the surface roughness of milling mould 6061-T6 aluminium alloys with carbide coated inserts. Optimization of the milling is very important to reduce the cost and time for machining mould. The purposes of this study are to develop the predicting model of surface roughness, to investigate the most dominant variables among the cutting speed, feed rate, axial depth and radial depth and to optimize the parameters. Response surface method based optimization approach was used in this study. It can be seen from the first order model that the feed rate is the most significantly influencing factor for the surface roughness. Second-order model reveals that there is no interaction between the variables and response.

AB - This paper explores on the optimization of the surface roughness of milling mould 6061-T6 aluminium alloys with carbide coated inserts. Optimization of the milling is very important to reduce the cost and time for machining mould. The purposes of this study are to develop the predicting model of surface roughness, to investigate the most dominant variables among the cutting speed, feed rate, axial depth and radial depth and to optimize the parameters. Response surface method based optimization approach was used in this study. It can be seen from the first order model that the feed rate is the most significantly influencing factor for the surface roughness. Second-order model reveals that there is no interaction between the variables and response.

KW - Aluminium alloys

KW - Machining

KW - Response surface method

KW - Surface roughness

UR - http://www.scopus.com/inward/record.url?scp=65349195179&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=65349195179&partnerID=8YFLogxK

M3 - Article

VL - 25

SP - 250

EP - 256

JO - European Journal of Scientific Research

JF - European Journal of Scientific Research

SN - 1450-202X

IS - 2

ER -