Single layer brushite coating onto stainless steel substrate using dipcoating technique

Ahmad Mulia Hafizayatullah Amiruddin, Roslinda Shamsudin, Azman Jalar @ Jalil, Muhammad Azmi Abdul Hamid

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

In this study, brushite (CaHPO 4 2H 2O) has been coated on a stainless steel substrate using dip-coating technique. This technique offers uniform and crack-free film over entire surface of the substrate and easy to perform. Layer of brushite coated surround the stainless steel is very much affected by the parameters used namely concentration of the coating solution, speed of coating, stirring time etc. Results show that a smooth thin film is obtained when 1.5M of brushite solution is used and stirred at 50 °C for 2 hours. The optimum withdrawal rate used was 1.5 mm s -1. Thickness of the coating obtained was around 51.37 μmwhich would enable the apatite to growth.

Original languageEnglish
Title of host publicationAdvanced Materials Research
Pages2004-2007
Number of pages4
Volume399-401
DOIs
Publication statusPublished - 2012
Event2011 International Conference on Chemical, Material and Metallurgical Engineering, ICCMME 2011 - Beihai
Duration: 23 Dec 201125 Dec 2011

Publication series

NameAdvanced Materials Research
Volume399-401
ISSN (Print)10226680

Other

Other2011 International Conference on Chemical, Material and Metallurgical Engineering, ICCMME 2011
CityBeihai
Period23/12/1125/12/11

Fingerprint

Stainless steel
Coatings
Substrates
Coating techniques
Apatite
Cracks
Thin films

Keywords

  • Brushite
  • Contact angle
  • Dip-coating
  • Single layer
  • Stainless steel

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Amiruddin, A. M. H., Shamsudin, R., Jalar @ Jalil, A., & Abdul Hamid, M. A. (2012). Single layer brushite coating onto stainless steel substrate using dipcoating technique. In Advanced Materials Research (Vol. 399-401, pp. 2004-2007). (Advanced Materials Research; Vol. 399-401). https://doi.org/10.4028/www.scientific.net/AMR.399-401.2004

Single layer brushite coating onto stainless steel substrate using dipcoating technique. / Amiruddin, Ahmad Mulia Hafizayatullah; Shamsudin, Roslinda; Jalar @ Jalil, Azman; Abdul Hamid, Muhammad Azmi.

Advanced Materials Research. Vol. 399-401 2012. p. 2004-2007 (Advanced Materials Research; Vol. 399-401).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Amiruddin, AMH, Shamsudin, R, Jalar @ Jalil, A & Abdul Hamid, MA 2012, Single layer brushite coating onto stainless steel substrate using dipcoating technique. in Advanced Materials Research. vol. 399-401, Advanced Materials Research, vol. 399-401, pp. 2004-2007, 2011 International Conference on Chemical, Material and Metallurgical Engineering, ICCMME 2011, Beihai, 23/12/11. https://doi.org/10.4028/www.scientific.net/AMR.399-401.2004
Amiruddin, Ahmad Mulia Hafizayatullah ; Shamsudin, Roslinda ; Jalar @ Jalil, Azman ; Abdul Hamid, Muhammad Azmi. / Single layer brushite coating onto stainless steel substrate using dipcoating technique. Advanced Materials Research. Vol. 399-401 2012. pp. 2004-2007 (Advanced Materials Research).
@inproceedings{c1be8f5d9e06467db6905fdc828f3625,
title = "Single layer brushite coating onto stainless steel substrate using dipcoating technique",
abstract = "In this study, brushite (CaHPO 4 2H 2O) has been coated on a stainless steel substrate using dip-coating technique. This technique offers uniform and crack-free film over entire surface of the substrate and easy to perform. Layer of brushite coated surround the stainless steel is very much affected by the parameters used namely concentration of the coating solution, speed of coating, stirring time etc. Results show that a smooth thin film is obtained when 1.5M of brushite solution is used and stirred at 50 °C for 2 hours. The optimum withdrawal rate used was 1.5 mm s -1. Thickness of the coating obtained was around 51.37 μmwhich would enable the apatite to growth.",
keywords = "Brushite, Contact angle, Dip-coating, Single layer, Stainless steel",
author = "Amiruddin, {Ahmad Mulia Hafizayatullah} and Roslinda Shamsudin and {Jalar @ Jalil}, Azman and {Abdul Hamid}, {Muhammad Azmi}",
year = "2012",
doi = "10.4028/www.scientific.net/AMR.399-401.2004",
language = "English",
isbn = "9783037853092",
volume = "399-401",
series = "Advanced Materials Research",
pages = "2004--2007",
booktitle = "Advanced Materials Research",

}

TY - GEN

T1 - Single layer brushite coating onto stainless steel substrate using dipcoating technique

AU - Amiruddin, Ahmad Mulia Hafizayatullah

AU - Shamsudin, Roslinda

AU - Jalar @ Jalil, Azman

AU - Abdul Hamid, Muhammad Azmi

PY - 2012

Y1 - 2012

N2 - In this study, brushite (CaHPO 4 2H 2O) has been coated on a stainless steel substrate using dip-coating technique. This technique offers uniform and crack-free film over entire surface of the substrate and easy to perform. Layer of brushite coated surround the stainless steel is very much affected by the parameters used namely concentration of the coating solution, speed of coating, stirring time etc. Results show that a smooth thin film is obtained when 1.5M of brushite solution is used and stirred at 50 °C for 2 hours. The optimum withdrawal rate used was 1.5 mm s -1. Thickness of the coating obtained was around 51.37 μmwhich would enable the apatite to growth.

AB - In this study, brushite (CaHPO 4 2H 2O) has been coated on a stainless steel substrate using dip-coating technique. This technique offers uniform and crack-free film over entire surface of the substrate and easy to perform. Layer of brushite coated surround the stainless steel is very much affected by the parameters used namely concentration of the coating solution, speed of coating, stirring time etc. Results show that a smooth thin film is obtained when 1.5M of brushite solution is used and stirred at 50 °C for 2 hours. The optimum withdrawal rate used was 1.5 mm s -1. Thickness of the coating obtained was around 51.37 μmwhich would enable the apatite to growth.

KW - Brushite

KW - Contact angle

KW - Dip-coating

KW - Single layer

KW - Stainless steel

UR - http://www.scopus.com/inward/record.url?scp=83755194703&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=83755194703&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMR.399-401.2004

DO - 10.4028/www.scientific.net/AMR.399-401.2004

M3 - Conference contribution

AN - SCOPUS:83755194703

SN - 9783037853092

VL - 399-401

T3 - Advanced Materials Research

SP - 2004

EP - 2007

BT - Advanced Materials Research

ER -