Simulation study of solar energy conversion for hybrid microgenerator cell

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

A hybrid solar - PZT microgenerator is designed using an n-doped single crystal p-type <100> silicon membrane as the solar cell and PZT layer deposited on the backside of the membrane as the mechanical energy harvester. The cell utilized a 40 μm thick membrane with an aluminum fin attached on its surface as the harvester for mechanical energies wind and raindrop. The solar cell has a dimension of 15 mm × 15 mm. Simulation was done using ATLAS software from SILVACO to obtain VOC, ISC, maximum power, and other characteristics for the solar cell. VOC and JSC of the cell are 0.41V and 1.363 μA/μm respectively. Under AM 1.5 condition, the maximum power density for the cell is 0.01913 W/cm2 and the efficiency is 19.13%. Simulation results suggest that the solar cell could be feasibly integrated into the hybrid microgenerator cell.

Original languageEnglish
Title of host publicationIEEE International Conference on Semiconductor Electronics, Proceedings, ICSE
Pages286-288
Number of pages3
DOIs
Publication statusPublished - 2010
Event2010 IEEE International Conference on Semiconductor Electronics, ICSE 2010 - Melaka
Duration: 28 Jun 201030 Jun 2010

Other

Other2010 IEEE International Conference on Semiconductor Electronics, ICSE 2010
CityMelaka
Period28/6/1030/6/10

Fingerprint

Energy conversion
Solar energy
Solar cells
Harvesters
Membranes
Volatile organic compounds
Silicon
Aluminum
Wind power
Single crystals

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Electronic, Optical and Magnetic Materials

Cite this

Hamzah, A. A., Khairul, K. N., Yunas, J., Dee, C. F., & Yeop Majlis, B. (2010). Simulation study of solar energy conversion for hybrid microgenerator cell. In IEEE International Conference on Semiconductor Electronics, Proceedings, ICSE (pp. 286-288). [5549365] https://doi.org/10.1109/SMELEC.2010.5549365

Simulation study of solar energy conversion for hybrid microgenerator cell. / Hamzah, Azrul Azlan; Khairul, Khairul Nisha; Yunas, Jumril; Dee, Chang Fu; Yeop Majlis, Burhanuddin.

IEEE International Conference on Semiconductor Electronics, Proceedings, ICSE. 2010. p. 286-288 5549365.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hamzah, AA, Khairul, KN, Yunas, J, Dee, CF & Yeop Majlis, B 2010, Simulation study of solar energy conversion for hybrid microgenerator cell. in IEEE International Conference on Semiconductor Electronics, Proceedings, ICSE., 5549365, pp. 286-288, 2010 IEEE International Conference on Semiconductor Electronics, ICSE 2010, Melaka, 28/6/10. https://doi.org/10.1109/SMELEC.2010.5549365
Hamzah AA, Khairul KN, Yunas J, Dee CF, Yeop Majlis B. Simulation study of solar energy conversion for hybrid microgenerator cell. In IEEE International Conference on Semiconductor Electronics, Proceedings, ICSE. 2010. p. 286-288. 5549365 https://doi.org/10.1109/SMELEC.2010.5549365
Hamzah, Azrul Azlan ; Khairul, Khairul Nisha ; Yunas, Jumril ; Dee, Chang Fu ; Yeop Majlis, Burhanuddin. / Simulation study of solar energy conversion for hybrid microgenerator cell. IEEE International Conference on Semiconductor Electronics, Proceedings, ICSE. 2010. pp. 286-288
@inproceedings{dd9e99a715e34b6c88df633e5d14b0dc,
title = "Simulation study of solar energy conversion for hybrid microgenerator cell",
abstract = "A hybrid solar - PZT microgenerator is designed using an n-doped single crystal p-type <100> silicon membrane as the solar cell and PZT layer deposited on the backside of the membrane as the mechanical energy harvester. The cell utilized a 40 μm thick membrane with an aluminum fin attached on its surface as the harvester for mechanical energies wind and raindrop. The solar cell has a dimension of 15 mm × 15 mm. Simulation was done using ATLAS software from SILVACO to obtain VOC, ISC, maximum power, and other characteristics for the solar cell. VOC and JSC of the cell are 0.41V and 1.363 μA/μm respectively. Under AM 1.5 condition, the maximum power density for the cell is 0.01913 W/cm2 and the efficiency is 19.13{\%}. Simulation results suggest that the solar cell could be feasibly integrated into the hybrid microgenerator cell.",
author = "Hamzah, {Azrul Azlan} and Khairul, {Khairul Nisha} and Jumril Yunas and Dee, {Chang Fu} and {Yeop Majlis}, Burhanuddin",
year = "2010",
doi = "10.1109/SMELEC.2010.5549365",
language = "English",
isbn = "9781424466092",
pages = "286--288",
booktitle = "IEEE International Conference on Semiconductor Electronics, Proceedings, ICSE",

}

TY - GEN

T1 - Simulation study of solar energy conversion for hybrid microgenerator cell

AU - Hamzah, Azrul Azlan

AU - Khairul, Khairul Nisha

AU - Yunas, Jumril

AU - Dee, Chang Fu

AU - Yeop Majlis, Burhanuddin

PY - 2010

Y1 - 2010

N2 - A hybrid solar - PZT microgenerator is designed using an n-doped single crystal p-type <100> silicon membrane as the solar cell and PZT layer deposited on the backside of the membrane as the mechanical energy harvester. The cell utilized a 40 μm thick membrane with an aluminum fin attached on its surface as the harvester for mechanical energies wind and raindrop. The solar cell has a dimension of 15 mm × 15 mm. Simulation was done using ATLAS software from SILVACO to obtain VOC, ISC, maximum power, and other characteristics for the solar cell. VOC and JSC of the cell are 0.41V and 1.363 μA/μm respectively. Under AM 1.5 condition, the maximum power density for the cell is 0.01913 W/cm2 and the efficiency is 19.13%. Simulation results suggest that the solar cell could be feasibly integrated into the hybrid microgenerator cell.

AB - A hybrid solar - PZT microgenerator is designed using an n-doped single crystal p-type <100> silicon membrane as the solar cell and PZT layer deposited on the backside of the membrane as the mechanical energy harvester. The cell utilized a 40 μm thick membrane with an aluminum fin attached on its surface as the harvester for mechanical energies wind and raindrop. The solar cell has a dimension of 15 mm × 15 mm. Simulation was done using ATLAS software from SILVACO to obtain VOC, ISC, maximum power, and other characteristics for the solar cell. VOC and JSC of the cell are 0.41V and 1.363 μA/μm respectively. Under AM 1.5 condition, the maximum power density for the cell is 0.01913 W/cm2 and the efficiency is 19.13%. Simulation results suggest that the solar cell could be feasibly integrated into the hybrid microgenerator cell.

UR - http://www.scopus.com/inward/record.url?scp=77957551214&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77957551214&partnerID=8YFLogxK

U2 - 10.1109/SMELEC.2010.5549365

DO - 10.1109/SMELEC.2010.5549365

M3 - Conference contribution

SN - 9781424466092

SP - 286

EP - 288

BT - IEEE International Conference on Semiconductor Electronics, Proceedings, ICSE

ER -