Separation of micro engineered particle using dielectrophoresis technique

Nur Rabiatul Adawiyah Tajul Othamany, Norazreen Abd Aziz, Muhammad Izzuddin Abd Samad, Muhamad Ramdzan Buyong, Burhanuddin Yeop Majlis

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

The process of manipulation and separation of non-contact particles, which is dielectrophoretic technique, DEP will be described in this paper. This indirect physical contact technique, DEP, focuses on the value of dielectric between its particles and the medium to minimize the problems that occur such as physical and chemical damage to the particles when using the direct physical contact technique. This study was carried out by using polystyrene particles of 1 μm, 4.8 μm and 9.9 μm. The difference of size in this polystyrene particles will determine the change in the pattern the related to the Clausius-Mossotti Factor (CMF) in which the particles will be attracting to the electrodes or repelling from the electrodes. Frequency range selected between 0 to 1.5 MHz The new value of the optimum cross-over frequency will give the more efficient manipulation and separation rates. The force that attracting, PDEP on the y axis and the force that repelling, NDEP on the z axis by the polystyrene particles is observed to see the efficiency and reliability of the process. This separation of polystyrene particles is compared with the separation of the pathogenic bacterial cell particles and blood components in human bodies such as RBC and platelets.

Original languageEnglish
Title of host publication2018 IEEE International Conference on Semiconductor Electronics, ICSE 2018 - Proceedings
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages69-72
Number of pages4
Volume2018-August
ISBN (Electronic)9781538652831
DOIs
Publication statusPublished - 3 Oct 2018
Event13th IEEE International Conference on Semiconductor Electronics, ICSE 2018 - Kuala Lumpur, Malaysia
Duration: 15 Aug 201817 Aug 2018

Other

Other13th IEEE International Conference on Semiconductor Electronics, ICSE 2018
CountryMalaysia
CityKuala Lumpur
Period15/8/1817/8/18

Fingerprint

Polystyrenes
Electrophoresis
Electrodes
Platelets
Blood
1-(2-(dodecyloxy)ethyl)pyrrolidine hydrochloride

Keywords

  • Dielectrophoretic
  • separation of micro particles

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Electronic, Optical and Magnetic Materials

Cite this

Tajul Othamany, N. R. A., Abd Aziz, N., Abd Samad, M. I., Buyong, M. R., & Yeop Majlis, B. (2018). Separation of micro engineered particle using dielectrophoresis technique. In 2018 IEEE International Conference on Semiconductor Electronics, ICSE 2018 - Proceedings (Vol. 2018-August, pp. 69-72). [8481241] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/SMELEC.2018.8481241

Separation of micro engineered particle using dielectrophoresis technique. / Tajul Othamany, Nur Rabiatul Adawiyah; Abd Aziz, Norazreen; Abd Samad, Muhammad Izzuddin; Buyong, Muhamad Ramdzan; Yeop Majlis, Burhanuddin.

2018 IEEE International Conference on Semiconductor Electronics, ICSE 2018 - Proceedings. Vol. 2018-August Institute of Electrical and Electronics Engineers Inc., 2018. p. 69-72 8481241.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tajul Othamany, NRA, Abd Aziz, N, Abd Samad, MI, Buyong, MR & Yeop Majlis, B 2018, Separation of micro engineered particle using dielectrophoresis technique. in 2018 IEEE International Conference on Semiconductor Electronics, ICSE 2018 - Proceedings. vol. 2018-August, 8481241, Institute of Electrical and Electronics Engineers Inc., pp. 69-72, 13th IEEE International Conference on Semiconductor Electronics, ICSE 2018, Kuala Lumpur, Malaysia, 15/8/18. https://doi.org/10.1109/SMELEC.2018.8481241
Tajul Othamany NRA, Abd Aziz N, Abd Samad MI, Buyong MR, Yeop Majlis B. Separation of micro engineered particle using dielectrophoresis technique. In 2018 IEEE International Conference on Semiconductor Electronics, ICSE 2018 - Proceedings. Vol. 2018-August. Institute of Electrical and Electronics Engineers Inc. 2018. p. 69-72. 8481241 https://doi.org/10.1109/SMELEC.2018.8481241
Tajul Othamany, Nur Rabiatul Adawiyah ; Abd Aziz, Norazreen ; Abd Samad, Muhammad Izzuddin ; Buyong, Muhamad Ramdzan ; Yeop Majlis, Burhanuddin. / Separation of micro engineered particle using dielectrophoresis technique. 2018 IEEE International Conference on Semiconductor Electronics, ICSE 2018 - Proceedings. Vol. 2018-August Institute of Electrical and Electronics Engineers Inc., 2018. pp. 69-72
@inproceedings{e9c18b3b2d05433b8955583bac091336,
title = "Separation of micro engineered particle using dielectrophoresis technique",
abstract = "The process of manipulation and separation of non-contact particles, which is dielectrophoretic technique, DEP will be described in this paper. This indirect physical contact technique, DEP, focuses on the value of dielectric between its particles and the medium to minimize the problems that occur such as physical and chemical damage to the particles when using the direct physical contact technique. This study was carried out by using polystyrene particles of 1 μm, 4.8 μm and 9.9 μm. The difference of size in this polystyrene particles will determine the change in the pattern the related to the Clausius-Mossotti Factor (CMF) in which the particles will be attracting to the electrodes or repelling from the electrodes. Frequency range selected between 0 to 1.5 MHz The new value of the optimum cross-over frequency will give the more efficient manipulation and separation rates. The force that attracting, PDEP on the y axis and the force that repelling, NDEP on the z axis by the polystyrene particles is observed to see the efficiency and reliability of the process. This separation of polystyrene particles is compared with the separation of the pathogenic bacterial cell particles and blood components in human bodies such as RBC and platelets.",
keywords = "Dielectrophoretic, separation of micro particles",
author = "{Tajul Othamany}, {Nur Rabiatul Adawiyah} and {Abd Aziz}, Norazreen and {Abd Samad}, {Muhammad Izzuddin} and Buyong, {Muhamad Ramdzan} and {Yeop Majlis}, Burhanuddin",
year = "2018",
month = "10",
day = "3",
doi = "10.1109/SMELEC.2018.8481241",
language = "English",
volume = "2018-August",
pages = "69--72",
booktitle = "2018 IEEE International Conference on Semiconductor Electronics, ICSE 2018 - Proceedings",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
address = "United States",

}

TY - GEN

T1 - Separation of micro engineered particle using dielectrophoresis technique

AU - Tajul Othamany, Nur Rabiatul Adawiyah

AU - Abd Aziz, Norazreen

AU - Abd Samad, Muhammad Izzuddin

AU - Buyong, Muhamad Ramdzan

AU - Yeop Majlis, Burhanuddin

PY - 2018/10/3

Y1 - 2018/10/3

N2 - The process of manipulation and separation of non-contact particles, which is dielectrophoretic technique, DEP will be described in this paper. This indirect physical contact technique, DEP, focuses on the value of dielectric between its particles and the medium to minimize the problems that occur such as physical and chemical damage to the particles when using the direct physical contact technique. This study was carried out by using polystyrene particles of 1 μm, 4.8 μm and 9.9 μm. The difference of size in this polystyrene particles will determine the change in the pattern the related to the Clausius-Mossotti Factor (CMF) in which the particles will be attracting to the electrodes or repelling from the electrodes. Frequency range selected between 0 to 1.5 MHz The new value of the optimum cross-over frequency will give the more efficient manipulation and separation rates. The force that attracting, PDEP on the y axis and the force that repelling, NDEP on the z axis by the polystyrene particles is observed to see the efficiency and reliability of the process. This separation of polystyrene particles is compared with the separation of the pathogenic bacterial cell particles and blood components in human bodies such as RBC and platelets.

AB - The process of manipulation and separation of non-contact particles, which is dielectrophoretic technique, DEP will be described in this paper. This indirect physical contact technique, DEP, focuses on the value of dielectric between its particles and the medium to minimize the problems that occur such as physical and chemical damage to the particles when using the direct physical contact technique. This study was carried out by using polystyrene particles of 1 μm, 4.8 μm and 9.9 μm. The difference of size in this polystyrene particles will determine the change in the pattern the related to the Clausius-Mossotti Factor (CMF) in which the particles will be attracting to the electrodes or repelling from the electrodes. Frequency range selected between 0 to 1.5 MHz The new value of the optimum cross-over frequency will give the more efficient manipulation and separation rates. The force that attracting, PDEP on the y axis and the force that repelling, NDEP on the z axis by the polystyrene particles is observed to see the efficiency and reliability of the process. This separation of polystyrene particles is compared with the separation of the pathogenic bacterial cell particles and blood components in human bodies such as RBC and platelets.

KW - Dielectrophoretic

KW - separation of micro particles

UR - http://www.scopus.com/inward/record.url?scp=85056271845&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85056271845&partnerID=8YFLogxK

U2 - 10.1109/SMELEC.2018.8481241

DO - 10.1109/SMELEC.2018.8481241

M3 - Conference contribution

VL - 2018-August

SP - 69

EP - 72

BT - 2018 IEEE International Conference on Semiconductor Electronics, ICSE 2018 - Proceedings

PB - Institute of Electrical and Electronics Engineers Inc.

ER -