Sensitivity of modeling in sheet metal three-point cyclic bending

M. R. Jamli, Ahmad Kamal Ariffin Mohd Ihsan, Dzuraidah Abd. Wahab, A. E. Ismail, I. A. Shah

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The aim of this paper is to examine the modeling sensitivity of the three-point bending test by using finite element method (FEM). Three-point bending test has been frequently used to determine the material hardening parameters of sheet metal. As a part of the parameter identification, three-point bending has been simulated and analyzed using FEM. To minimize the computation time, shell element was used to model the sheet metal. The analysis includes implicit and explicit procedures. In particular, this study examines the effect of FEM results by varying the element type, mesh density, and number of integration point. It is shown that the implicit procedure analyze the simulation with very less computation time compared to the explicit procedure. The results also show that only the number of integration point has significant effect on the simulation in both implicit and explicit procedures.

Original languageEnglish
Title of host publicationApplied Mechanics and Materials
Pages187-191
Number of pages5
Volume165
DOIs
Publication statusPublished - 2012
EventRegional Conference on Automotive Research, ReCAR 2011 - Kuala Lumpur
Duration: 14 Dec 201115 Dec 2011

Publication series

NameApplied Mechanics and Materials
Volume165
ISSN (Print)16609336
ISSN (Electronic)16627482

Other

OtherRegional Conference on Automotive Research, ReCAR 2011
CityKuala Lumpur
Period14/12/1115/12/11

Fingerprint

Sheet metal
Bending tests
Finite element method
Hardening
Identification (control systems)

Keywords

  • Explicit
  • Finite element method
  • Implicit
  • Three-point bending

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Jamli, M. R., Mohd Ihsan, A. K. A., Abd. Wahab, D., Ismail, A. E., & Shah, I. A. (2012). Sensitivity of modeling in sheet metal three-point cyclic bending. In Applied Mechanics and Materials (Vol. 165, pp. 187-191). (Applied Mechanics and Materials; Vol. 165). https://doi.org/10.4028/www.scientific.net/AMM.165.187

Sensitivity of modeling in sheet metal three-point cyclic bending. / Jamli, M. R.; Mohd Ihsan, Ahmad Kamal Ariffin; Abd. Wahab, Dzuraidah; Ismail, A. E.; Shah, I. A.

Applied Mechanics and Materials. Vol. 165 2012. p. 187-191 (Applied Mechanics and Materials; Vol. 165).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Jamli, MR, Mohd Ihsan, AKA, Abd. Wahab, D, Ismail, AE & Shah, IA 2012, Sensitivity of modeling in sheet metal three-point cyclic bending. in Applied Mechanics and Materials. vol. 165, Applied Mechanics and Materials, vol. 165, pp. 187-191, Regional Conference on Automotive Research, ReCAR 2011, Kuala Lumpur, 14/12/11. https://doi.org/10.4028/www.scientific.net/AMM.165.187
Jamli MR, Mohd Ihsan AKA, Abd. Wahab D, Ismail AE, Shah IA. Sensitivity of modeling in sheet metal three-point cyclic bending. In Applied Mechanics and Materials. Vol. 165. 2012. p. 187-191. (Applied Mechanics and Materials). https://doi.org/10.4028/www.scientific.net/AMM.165.187
Jamli, M. R. ; Mohd Ihsan, Ahmad Kamal Ariffin ; Abd. Wahab, Dzuraidah ; Ismail, A. E. ; Shah, I. A. / Sensitivity of modeling in sheet metal three-point cyclic bending. Applied Mechanics and Materials. Vol. 165 2012. pp. 187-191 (Applied Mechanics and Materials).
@inproceedings{342ca42fab7348f7a3db3d9fade84baa,
title = "Sensitivity of modeling in sheet metal three-point cyclic bending",
abstract = "The aim of this paper is to examine the modeling sensitivity of the three-point bending test by using finite element method (FEM). Three-point bending test has been frequently used to determine the material hardening parameters of sheet metal. As a part of the parameter identification, three-point bending has been simulated and analyzed using FEM. To minimize the computation time, shell element was used to model the sheet metal. The analysis includes implicit and explicit procedures. In particular, this study examines the effect of FEM results by varying the element type, mesh density, and number of integration point. It is shown that the implicit procedure analyze the simulation with very less computation time compared to the explicit procedure. The results also show that only the number of integration point has significant effect on the simulation in both implicit and explicit procedures.",
keywords = "Explicit, Finite element method, Implicit, Three-point bending",
author = "Jamli, {M. R.} and {Mohd Ihsan}, {Ahmad Kamal Ariffin} and {Abd. Wahab}, Dzuraidah and Ismail, {A. E.} and Shah, {I. A.}",
year = "2012",
doi = "10.4028/www.scientific.net/AMM.165.187",
language = "English",
isbn = "9783037854136",
volume = "165",
series = "Applied Mechanics and Materials",
pages = "187--191",
booktitle = "Applied Mechanics and Materials",

}

TY - GEN

T1 - Sensitivity of modeling in sheet metal three-point cyclic bending

AU - Jamli, M. R.

AU - Mohd Ihsan, Ahmad Kamal Ariffin

AU - Abd. Wahab, Dzuraidah

AU - Ismail, A. E.

AU - Shah, I. A.

PY - 2012

Y1 - 2012

N2 - The aim of this paper is to examine the modeling sensitivity of the three-point bending test by using finite element method (FEM). Three-point bending test has been frequently used to determine the material hardening parameters of sheet metal. As a part of the parameter identification, three-point bending has been simulated and analyzed using FEM. To minimize the computation time, shell element was used to model the sheet metal. The analysis includes implicit and explicit procedures. In particular, this study examines the effect of FEM results by varying the element type, mesh density, and number of integration point. It is shown that the implicit procedure analyze the simulation with very less computation time compared to the explicit procedure. The results also show that only the number of integration point has significant effect on the simulation in both implicit and explicit procedures.

AB - The aim of this paper is to examine the modeling sensitivity of the three-point bending test by using finite element method (FEM). Three-point bending test has been frequently used to determine the material hardening parameters of sheet metal. As a part of the parameter identification, three-point bending has been simulated and analyzed using FEM. To minimize the computation time, shell element was used to model the sheet metal. The analysis includes implicit and explicit procedures. In particular, this study examines the effect of FEM results by varying the element type, mesh density, and number of integration point. It is shown that the implicit procedure analyze the simulation with very less computation time compared to the explicit procedure. The results also show that only the number of integration point has significant effect on the simulation in both implicit and explicit procedures.

KW - Explicit

KW - Finite element method

KW - Implicit

KW - Three-point bending

UR - http://www.scopus.com/inward/record.url?scp=84860798160&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84860798160&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMM.165.187

DO - 10.4028/www.scientific.net/AMM.165.187

M3 - Conference contribution

SN - 9783037854136

VL - 165

T3 - Applied Mechanics and Materials

SP - 187

EP - 191

BT - Applied Mechanics and Materials

ER -