Rigid polyurethane foam with ionic liquid modified multi walled carbon nanotubes composites

A. A. Sinar, Z. Firuz, A. Z. Nur Hidayah, M. A. Hazizan, Sahrim Ahmad

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The rigid polyurethane (PU) were produced using ionic liquid (IL) modified multi walled carbon nanotubes (MWCNTs) by reaction of palm oil based polyol (POP) with methylene diphenyl diisocyanate (MDI). The 1-butyl-3-methylimidazolium tetrafluoborate (BMIMBF4) used as IL to disperse MWCNTs in PU foam by grinding in ratio 1:3 by weight of MWCNTs to IL till black paste were obtained. The effects of different percentage of modified MWCNTs (0.0 - 3.0 %) on Polyurethane/Multi Walled Carbon Nanotubes/Ionic Liquid (PMI) foam composites were evaluated in density, morphology and compressive strength. The density were increased higher 0.0538 kg/m3 at 3.0 % PMI. The average cell size value higher without addition modified MWCNTs and scanning electron microscopy (SEM) showed inhomogenously structure with addition of modified MWCNTs. Compressive strength with 0.5 % PMI showed the highest value 1.671 MPa compared to other PMI.

Original languageEnglish
Title of host publicationMaterials Science Forum
PublisherTrans Tech Publications Ltd
Pages159-163
Number of pages5
Volume857
ISBN (Print)9783035710205
DOIs
Publication statusPublished - 2016
EventInternational Conference on Advanced Materials Engineering and Technology, ICAMET 2015 - Kaohsiung, Taiwan, Province of China
Duration: 4 Dec 20155 Dec 2015

Publication series

NameMaterials Science Forum
Volume857
ISSN (Print)02555476

Other

OtherInternational Conference on Advanced Materials Engineering and Technology, ICAMET 2015
CountryTaiwan, Province of China
CityKaohsiung
Period4/12/155/12/15

Fingerprint

polyurethane foam
Ionic Liquids
Carbon Nanotubes
Ionic liquids
Polyurethanes
Foams
Carbon nanotubes
carbon nanotubes
composite materials
Composite materials
liquids
compressive strength
Compressive strength
diisocyanates
Palm oil
Polyols
grinding
Ointments
methylene
foams

Keywords

  • Ionic liquid
  • Multi walled carbon nanotubes
  • Polyurethane

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanical Engineering
  • Mechanics of Materials

Cite this

Sinar, A. A., Firuz, Z., Nur Hidayah, A. Z., Hazizan, M. A., & Ahmad, S. (2016). Rigid polyurethane foam with ionic liquid modified multi walled carbon nanotubes composites. In Materials Science Forum (Vol. 857, pp. 159-163). (Materials Science Forum; Vol. 857). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/MSF.857.159

Rigid polyurethane foam with ionic liquid modified multi walled carbon nanotubes composites. / Sinar, A. A.; Firuz, Z.; Nur Hidayah, A. Z.; Hazizan, M. A.; Ahmad, Sahrim.

Materials Science Forum. Vol. 857 Trans Tech Publications Ltd, 2016. p. 159-163 (Materials Science Forum; Vol. 857).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sinar, AA, Firuz, Z, Nur Hidayah, AZ, Hazizan, MA & Ahmad, S 2016, Rigid polyurethane foam with ionic liquid modified multi walled carbon nanotubes composites. in Materials Science Forum. vol. 857, Materials Science Forum, vol. 857, Trans Tech Publications Ltd, pp. 159-163, International Conference on Advanced Materials Engineering and Technology, ICAMET 2015, Kaohsiung, Taiwan, Province of China, 4/12/15. https://doi.org/10.4028/www.scientific.net/MSF.857.159
Sinar AA, Firuz Z, Nur Hidayah AZ, Hazizan MA, Ahmad S. Rigid polyurethane foam with ionic liquid modified multi walled carbon nanotubes composites. In Materials Science Forum. Vol. 857. Trans Tech Publications Ltd. 2016. p. 159-163. (Materials Science Forum). https://doi.org/10.4028/www.scientific.net/MSF.857.159
Sinar, A. A. ; Firuz, Z. ; Nur Hidayah, A. Z. ; Hazizan, M. A. ; Ahmad, Sahrim. / Rigid polyurethane foam with ionic liquid modified multi walled carbon nanotubes composites. Materials Science Forum. Vol. 857 Trans Tech Publications Ltd, 2016. pp. 159-163 (Materials Science Forum).
@inproceedings{a154c4b7ee9445dcb05d1304f196a5d3,
title = "Rigid polyurethane foam with ionic liquid modified multi walled carbon nanotubes composites",
abstract = "The rigid polyurethane (PU) were produced using ionic liquid (IL) modified multi walled carbon nanotubes (MWCNTs) by reaction of palm oil based polyol (POP) with methylene diphenyl diisocyanate (MDI). The 1-butyl-3-methylimidazolium tetrafluoborate (BMIMBF4) used as IL to disperse MWCNTs in PU foam by grinding in ratio 1:3 by weight of MWCNTs to IL till black paste were obtained. The effects of different percentage of modified MWCNTs (0.0 - 3.0 {\%}) on Polyurethane/Multi Walled Carbon Nanotubes/Ionic Liquid (PMI) foam composites were evaluated in density, morphology and compressive strength. The density were increased higher 0.0538 kg/m3 at 3.0 {\%} PMI. The average cell size value higher without addition modified MWCNTs and scanning electron microscopy (SEM) showed inhomogenously structure with addition of modified MWCNTs. Compressive strength with 0.5 {\%} PMI showed the highest value 1.671 MPa compared to other PMI.",
keywords = "Ionic liquid, Multi walled carbon nanotubes, Polyurethane",
author = "Sinar, {A. A.} and Z. Firuz and {Nur Hidayah}, {A. Z.} and Hazizan, {M. A.} and Sahrim Ahmad",
year = "2016",
doi = "10.4028/www.scientific.net/MSF.857.159",
language = "English",
isbn = "9783035710205",
volume = "857",
series = "Materials Science Forum",
publisher = "Trans Tech Publications Ltd",
pages = "159--163",
booktitle = "Materials Science Forum",

}

TY - GEN

T1 - Rigid polyurethane foam with ionic liquid modified multi walled carbon nanotubes composites

AU - Sinar, A. A.

AU - Firuz, Z.

AU - Nur Hidayah, A. Z.

AU - Hazizan, M. A.

AU - Ahmad, Sahrim

PY - 2016

Y1 - 2016

N2 - The rigid polyurethane (PU) were produced using ionic liquid (IL) modified multi walled carbon nanotubes (MWCNTs) by reaction of palm oil based polyol (POP) with methylene diphenyl diisocyanate (MDI). The 1-butyl-3-methylimidazolium tetrafluoborate (BMIMBF4) used as IL to disperse MWCNTs in PU foam by grinding in ratio 1:3 by weight of MWCNTs to IL till black paste were obtained. The effects of different percentage of modified MWCNTs (0.0 - 3.0 %) on Polyurethane/Multi Walled Carbon Nanotubes/Ionic Liquid (PMI) foam composites were evaluated in density, morphology and compressive strength. The density were increased higher 0.0538 kg/m3 at 3.0 % PMI. The average cell size value higher without addition modified MWCNTs and scanning electron microscopy (SEM) showed inhomogenously structure with addition of modified MWCNTs. Compressive strength with 0.5 % PMI showed the highest value 1.671 MPa compared to other PMI.

AB - The rigid polyurethane (PU) were produced using ionic liquid (IL) modified multi walled carbon nanotubes (MWCNTs) by reaction of palm oil based polyol (POP) with methylene diphenyl diisocyanate (MDI). The 1-butyl-3-methylimidazolium tetrafluoborate (BMIMBF4) used as IL to disperse MWCNTs in PU foam by grinding in ratio 1:3 by weight of MWCNTs to IL till black paste were obtained. The effects of different percentage of modified MWCNTs (0.0 - 3.0 %) on Polyurethane/Multi Walled Carbon Nanotubes/Ionic Liquid (PMI) foam composites were evaluated in density, morphology and compressive strength. The density were increased higher 0.0538 kg/m3 at 3.0 % PMI. The average cell size value higher without addition modified MWCNTs and scanning electron microscopy (SEM) showed inhomogenously structure with addition of modified MWCNTs. Compressive strength with 0.5 % PMI showed the highest value 1.671 MPa compared to other PMI.

KW - Ionic liquid

KW - Multi walled carbon nanotubes

KW - Polyurethane

UR - http://www.scopus.com/inward/record.url?scp=84961285108&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84961285108&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/MSF.857.159

DO - 10.4028/www.scientific.net/MSF.857.159

M3 - Conference contribution

AN - SCOPUS:84961285108

SN - 9783035710205

VL - 857

T3 - Materials Science Forum

SP - 159

EP - 163

BT - Materials Science Forum

PB - Trans Tech Publications Ltd

ER -