Renewable energy inverter development using dSPACE DS1104 controller board

Zamre Abd Ghani, Hannan M A, Azah Mohamed

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Citations (Scopus)

Abstract

In this paper, the development of three-phase renewable energy inverter by using the dSPACE DS1104 digital signal processing controller board is presented. The board enables the MATLAB/Simulink model linking to the hardware. The standalone voltage source inverter's control system which is implemented in the DS1104 board utilizes a digital proportional integral controller to stabilize its 50Hz sinusoidal ac output voltages. The board generates the sinusoidal pulse-width modulation control signals for the switching of the inverter's power devices, insulated gate bipolar transistors. The simulation was performed in the Simulink/MATLAB environment and the PV output power is represented by a dc power supply. This simulation is then translated into the inverter prototype which was tested in the laboratory. The experimental results waveforms such as ac output voltages, current and total harmonic distortion are presented.

Original languageEnglish
Title of host publicationPECon2010 - 2010 IEEE International Conference on Power and Energy
Pages69-73
Number of pages5
DOIs
Publication statusPublished - 2010
Event2010 IEEE International Conference on Power and Energy, PECon2010 - Kuala Lumpur
Duration: 29 Nov 20101 Dec 2010

Other

Other2010 IEEE International Conference on Power and Energy, PECon2010
CityKuala Lumpur
Period29/11/101/12/10

Fingerprint

Controllers
MATLAB
Electric potential
Insulated gate bipolar transistors (IGBT)
Harmonic distortion
Digital signal processing
Pulse width modulation
Hardware
Control systems

Keywords

  • dSPACE
  • Inverter
  • MATLAB/Simulink
  • PV
  • SPWM

ASJC Scopus subject areas

  • Energy Engineering and Power Technology

Cite this

Ghani, Z. A., M A, H., & Mohamed, A. (2010). Renewable energy inverter development using dSPACE DS1104 controller board. In PECon2010 - 2010 IEEE International Conference on Power and Energy (pp. 69-73). [5697559] https://doi.org/10.1109/PECON.2010.5697559

Renewable energy inverter development using dSPACE DS1104 controller board. / Ghani, Zamre Abd; M A, Hannan; Mohamed, Azah.

PECon2010 - 2010 IEEE International Conference on Power and Energy. 2010. p. 69-73 5697559.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ghani, ZA, M A, H & Mohamed, A 2010, Renewable energy inverter development using dSPACE DS1104 controller board. in PECon2010 - 2010 IEEE International Conference on Power and Energy., 5697559, pp. 69-73, 2010 IEEE International Conference on Power and Energy, PECon2010, Kuala Lumpur, 29/11/10. https://doi.org/10.1109/PECON.2010.5697559
Ghani ZA, M A H, Mohamed A. Renewable energy inverter development using dSPACE DS1104 controller board. In PECon2010 - 2010 IEEE International Conference on Power and Energy. 2010. p. 69-73. 5697559 https://doi.org/10.1109/PECON.2010.5697559
Ghani, Zamre Abd ; M A, Hannan ; Mohamed, Azah. / Renewable energy inverter development using dSPACE DS1104 controller board. PECon2010 - 2010 IEEE International Conference on Power and Energy. 2010. pp. 69-73
@inproceedings{759c1cd072bd474895d262ac3f5e7470,
title = "Renewable energy inverter development using dSPACE DS1104 controller board",
abstract = "In this paper, the development of three-phase renewable energy inverter by using the dSPACE DS1104 digital signal processing controller board is presented. The board enables the MATLAB/Simulink model linking to the hardware. The standalone voltage source inverter's control system which is implemented in the DS1104 board utilizes a digital proportional integral controller to stabilize its 50Hz sinusoidal ac output voltages. The board generates the sinusoidal pulse-width modulation control signals for the switching of the inverter's power devices, insulated gate bipolar transistors. The simulation was performed in the Simulink/MATLAB environment and the PV output power is represented by a dc power supply. This simulation is then translated into the inverter prototype which was tested in the laboratory. The experimental results waveforms such as ac output voltages, current and total harmonic distortion are presented.",
keywords = "dSPACE, Inverter, MATLAB/Simulink, PV, SPWM",
author = "Ghani, {Zamre Abd} and {M A}, Hannan and Azah Mohamed",
year = "2010",
doi = "10.1109/PECON.2010.5697559",
language = "English",
isbn = "9781424489466",
pages = "69--73",
booktitle = "PECon2010 - 2010 IEEE International Conference on Power and Energy",

}

TY - GEN

T1 - Renewable energy inverter development using dSPACE DS1104 controller board

AU - Ghani, Zamre Abd

AU - M A, Hannan

AU - Mohamed, Azah

PY - 2010

Y1 - 2010

N2 - In this paper, the development of three-phase renewable energy inverter by using the dSPACE DS1104 digital signal processing controller board is presented. The board enables the MATLAB/Simulink model linking to the hardware. The standalone voltage source inverter's control system which is implemented in the DS1104 board utilizes a digital proportional integral controller to stabilize its 50Hz sinusoidal ac output voltages. The board generates the sinusoidal pulse-width modulation control signals for the switching of the inverter's power devices, insulated gate bipolar transistors. The simulation was performed in the Simulink/MATLAB environment and the PV output power is represented by a dc power supply. This simulation is then translated into the inverter prototype which was tested in the laboratory. The experimental results waveforms such as ac output voltages, current and total harmonic distortion are presented.

AB - In this paper, the development of three-phase renewable energy inverter by using the dSPACE DS1104 digital signal processing controller board is presented. The board enables the MATLAB/Simulink model linking to the hardware. The standalone voltage source inverter's control system which is implemented in the DS1104 board utilizes a digital proportional integral controller to stabilize its 50Hz sinusoidal ac output voltages. The board generates the sinusoidal pulse-width modulation control signals for the switching of the inverter's power devices, insulated gate bipolar transistors. The simulation was performed in the Simulink/MATLAB environment and the PV output power is represented by a dc power supply. This simulation is then translated into the inverter prototype which was tested in the laboratory. The experimental results waveforms such as ac output voltages, current and total harmonic distortion are presented.

KW - dSPACE

KW - Inverter

KW - MATLAB/Simulink

KW - PV

KW - SPWM

UR - http://www.scopus.com/inward/record.url?scp=79951780406&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=79951780406&partnerID=8YFLogxK

U2 - 10.1109/PECON.2010.5697559

DO - 10.1109/PECON.2010.5697559

M3 - Conference contribution

AN - SCOPUS:79951780406

SN - 9781424489466

SP - 69

EP - 73

BT - PECon2010 - 2010 IEEE International Conference on Power and Energy

ER -