Process Parameters Optimization of 14nm MOSFET Using 2-D Analytical Modelling

Z. A. Noor Faizah, Ibrahim Ahmad, P. J. Ker, Y. Siti Munirah, R. Mohd Firdaus, E. Md Fazle, P. Susthitha Menon N V Visvanathan

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

This paper presents the modeling and optimization of 14nm gate length CMOS transistor which is down-scaled from previous 32nm gate length. High-k metal gate material was used in this research utilizing Hafnium Dioxide (HfO2) as dielectric and Tungsten Silicide (WSi2) and Titanium Silicide (TiSi2) as a metal gate for NMOS and PMOS respectively. The devices are fabricated virtually using ATHENA module and characterized its performance evaluation via ATLAS module; both in Virtual Wafer Fabrication (VWF) of Silvaco TCAD Tools. The devices were then optimized through a process parameters variability using L9 Taguchi Method. There were four process parameter with two noise factor of different values were used to analyze the factor effect. The results show that the optimal value for both transistors are well within ITRS 2013 prediction where VTH and IOFF are 0.236737V and 6.995705nA/um for NMOS device and 0.248635 V and 5.26nA/um for PMOS device respectively.

Original languageEnglish
Article number01017
JournalMATEC Web of Conferences
Volume78
DOIs
Publication statusPublished - 7 Oct 2016

Fingerprint

Transistors
Hafnium
Metals
Tungsten
Taguchi methods
Titanium
Fabrication
thiazole-4-carboxamide adenine dinucleotide
titanium silicide

ASJC Scopus subject areas

  • Chemistry(all)
  • Engineering(all)
  • Materials Science(all)

Cite this

Noor Faizah, Z. A., Ahmad, I., Ker, P. J., Siti Munirah, Y., Mohd Firdaus, R., Md Fazle, E., & N V Visvanathan, P. S. M. (2016). Process Parameters Optimization of 14nm MOSFET Using 2-D Analytical Modelling. MATEC Web of Conferences, 78, [01017]. https://doi.org/10.1051/matecconf/20167801017

Process Parameters Optimization of 14nm MOSFET Using 2-D Analytical Modelling. / Noor Faizah, Z. A.; Ahmad, Ibrahim; Ker, P. J.; Siti Munirah, Y.; Mohd Firdaus, R.; Md Fazle, E.; N V Visvanathan, P. Susthitha Menon.

In: MATEC Web of Conferences, Vol. 78, 01017, 07.10.2016.

Research output: Contribution to journalArticle

Noor Faizah ZA, Ahmad I, Ker PJ, Siti Munirah Y, Mohd Firdaus R, Md Fazle E et al. Process Parameters Optimization of 14nm MOSFET Using 2-D Analytical Modelling. MATEC Web of Conferences. 2016 Oct 7;78. 01017. https://doi.org/10.1051/matecconf/20167801017
Noor Faizah, Z. A. ; Ahmad, Ibrahim ; Ker, P. J. ; Siti Munirah, Y. ; Mohd Firdaus, R. ; Md Fazle, E. ; N V Visvanathan, P. Susthitha Menon. / Process Parameters Optimization of 14nm MOSFET Using 2-D Analytical Modelling. In: MATEC Web of Conferences. 2016 ; Vol. 78.
@article{29abb2b6efd64692a8d7bba044c3c3e5,
title = "Process Parameters Optimization of 14nm MOSFET Using 2-D Analytical Modelling",
abstract = "This paper presents the modeling and optimization of 14nm gate length CMOS transistor which is down-scaled from previous 32nm gate length. High-k metal gate material was used in this research utilizing Hafnium Dioxide (HfO2) as dielectric and Tungsten Silicide (WSi2) and Titanium Silicide (TiSi2) as a metal gate for NMOS and PMOS respectively. The devices are fabricated virtually using ATHENA module and characterized its performance evaluation via ATLAS module; both in Virtual Wafer Fabrication (VWF) of Silvaco TCAD Tools. The devices were then optimized through a process parameters variability using L9 Taguchi Method. There were four process parameter with two noise factor of different values were used to analyze the factor effect. The results show that the optimal value for both transistors are well within ITRS 2013 prediction where VTH and IOFF are 0.236737V and 6.995705nA/um for NMOS device and 0.248635 V and 5.26nA/um for PMOS device respectively.",
author = "{Noor Faizah}, {Z. A.} and Ibrahim Ahmad and Ker, {P. J.} and {Siti Munirah}, Y. and {Mohd Firdaus}, R. and {Md Fazle}, E. and {N V Visvanathan}, {P. Susthitha Menon}",
year = "2016",
month = "10",
day = "7",
doi = "10.1051/matecconf/20167801017",
language = "English",
volume = "78",
journal = "MATEC Web of Conferences",
issn = "2261-236X",
publisher = "EDP Sciences",

}

TY - JOUR

T1 - Process Parameters Optimization of 14nm MOSFET Using 2-D Analytical Modelling

AU - Noor Faizah, Z. A.

AU - Ahmad, Ibrahim

AU - Ker, P. J.

AU - Siti Munirah, Y.

AU - Mohd Firdaus, R.

AU - Md Fazle, E.

AU - N V Visvanathan, P. Susthitha Menon

PY - 2016/10/7

Y1 - 2016/10/7

N2 - This paper presents the modeling and optimization of 14nm gate length CMOS transistor which is down-scaled from previous 32nm gate length. High-k metal gate material was used in this research utilizing Hafnium Dioxide (HfO2) as dielectric and Tungsten Silicide (WSi2) and Titanium Silicide (TiSi2) as a metal gate for NMOS and PMOS respectively. The devices are fabricated virtually using ATHENA module and characterized its performance evaluation via ATLAS module; both in Virtual Wafer Fabrication (VWF) of Silvaco TCAD Tools. The devices were then optimized through a process parameters variability using L9 Taguchi Method. There were four process parameter with two noise factor of different values were used to analyze the factor effect. The results show that the optimal value for both transistors are well within ITRS 2013 prediction where VTH and IOFF are 0.236737V and 6.995705nA/um for NMOS device and 0.248635 V and 5.26nA/um for PMOS device respectively.

AB - This paper presents the modeling and optimization of 14nm gate length CMOS transistor which is down-scaled from previous 32nm gate length. High-k metal gate material was used in this research utilizing Hafnium Dioxide (HfO2) as dielectric and Tungsten Silicide (WSi2) and Titanium Silicide (TiSi2) as a metal gate for NMOS and PMOS respectively. The devices are fabricated virtually using ATHENA module and characterized its performance evaluation via ATLAS module; both in Virtual Wafer Fabrication (VWF) of Silvaco TCAD Tools. The devices were then optimized through a process parameters variability using L9 Taguchi Method. There were four process parameter with two noise factor of different values were used to analyze the factor effect. The results show that the optimal value for both transistors are well within ITRS 2013 prediction where VTH and IOFF are 0.236737V and 6.995705nA/um for NMOS device and 0.248635 V and 5.26nA/um for PMOS device respectively.

UR - http://www.scopus.com/inward/record.url?scp=84992437009&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84992437009&partnerID=8YFLogxK

U2 - 10.1051/matecconf/20167801017

DO - 10.1051/matecconf/20167801017

M3 - Article

AN - SCOPUS:84992437009

VL - 78

JO - MATEC Web of Conferences

JF - MATEC Web of Conferences

SN - 2261-236X

M1 - 01017

ER -