Predicting the performance of chemical heat pump with various metallic-salts drying system

A. S. Hussein, M. Ibrahim, Azami Zaharim, Kamaruzzaman Sopian

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

This paper presents the performance prediction of chemical heat pump for various metallic- salts for drying purpose. A simulation has been developed to simulate the effect of various operating conditions on the performance of the chemical heat pump. Three types of metallic salts (CaCl2, SrCl 2, and MnCl2) have been studied as a working pairs of chemical heat pump. The performance of these three types against various generator, evaporator and condenser temperatures is compared. The results showed that CaCl2 is better performance than SrCl2 and MnCl 2. increasing condenser temperatures cause a decrease in chemical heat pump performance for each type while the performance of chemical heat pump increase with increasing evaporator temperatures for each types. The energy density also has been studied for the three types which the result show that CaCl2 is higher than SrCl2 and MnCl2 Considering that the 25 KW is acceptable of power for drying system.

Original languageEnglish
Title of host publicationProceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09
Pages262-266
Number of pages5
Publication statusPublished - 2009
Event3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, 3rd WSEAS International Conference on Renewable Energy Sources, RES '09, 3rd WSEAS International Conference on Waste Management, WWAI '09 - Canary Islands
Duration: 1 Jul 20093 Jul 2009

Other

Other3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, 3rd WSEAS International Conference on Renewable Energy Sources, RES '09, 3rd WSEAS International Conference on Waste Management, WWAI '09
CityCanary Islands
Period1/7/093/7/09

Fingerprint

Drying
Pumps
Salts
salt
Evaporators
temperature
Temperature
Hot Temperature
heat pump
chemical
drying
prediction
simulation
energy

Keywords

  • (CaCl, SrCl, MnCl,) - Nh chemical heat pump
  • Coefficient of performance
  • Drying
  • Energy density

ASJC Scopus subject areas

  • Energy Engineering and Power Technology
  • Renewable Energy, Sustainability and the Environment
  • Management, Monitoring, Policy and Law
  • Waste Management and Disposal

Cite this

Hussein, A. S., Ibrahim, M., Zaharim, A., & Sopian, K. (2009). Predicting the performance of chemical heat pump with various metallic-salts drying system. In Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09 (pp. 262-266)

Predicting the performance of chemical heat pump with various metallic-salts drying system. / Hussein, A. S.; Ibrahim, M.; Zaharim, Azami; Sopian, Kamaruzzaman.

Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09. 2009. p. 262-266.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hussein, AS, Ibrahim, M, Zaharim, A & Sopian, K 2009, Predicting the performance of chemical heat pump with various metallic-salts drying system. in Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09. pp. 262-266, 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, 3rd WSEAS International Conference on Renewable Energy Sources, RES '09, 3rd WSEAS International Conference on Waste Management, WWAI '09, Canary Islands, 1/7/09.
Hussein AS, Ibrahim M, Zaharim A, Sopian K. Predicting the performance of chemical heat pump with various metallic-salts drying system. In Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09. 2009. p. 262-266
Hussein, A. S. ; Ibrahim, M. ; Zaharim, Azami ; Sopian, Kamaruzzaman. / Predicting the performance of chemical heat pump with various metallic-salts drying system. Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09. 2009. pp. 262-266
@inproceedings{eb76b65d04574bda8ce23e84f8c5bd05,
title = "Predicting the performance of chemical heat pump with various metallic-salts drying system",
abstract = "This paper presents the performance prediction of chemical heat pump for various metallic- salts for drying purpose. A simulation has been developed to simulate the effect of various operating conditions on the performance of the chemical heat pump. Three types of metallic salts (CaCl2, SrCl 2, and MnCl2) have been studied as a working pairs of chemical heat pump. The performance of these three types against various generator, evaporator and condenser temperatures is compared. The results showed that CaCl2 is better performance than SrCl2 and MnCl 2. increasing condenser temperatures cause a decrease in chemical heat pump performance for each type while the performance of chemical heat pump increase with increasing evaporator temperatures for each types. The energy density also has been studied for the three types which the result show that CaCl2 is higher than SrCl2 and MnCl2 Considering that the 25 KW is acceptable of power for drying system.",
keywords = "(CaCl, SrCl, MnCl,) - Nh chemical heat pump, Coefficient of performance, Drying, Energy density",
author = "Hussein, {A. S.} and M. Ibrahim and Azami Zaharim and Kamaruzzaman Sopian",
year = "2009",
language = "English",
isbn = "9789604740932",
pages = "262--266",
booktitle = "Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09",

}

TY - GEN

T1 - Predicting the performance of chemical heat pump with various metallic-salts drying system

AU - Hussein, A. S.

AU - Ibrahim, M.

AU - Zaharim, Azami

AU - Sopian, Kamaruzzaman

PY - 2009

Y1 - 2009

N2 - This paper presents the performance prediction of chemical heat pump for various metallic- salts for drying purpose. A simulation has been developed to simulate the effect of various operating conditions on the performance of the chemical heat pump. Three types of metallic salts (CaCl2, SrCl 2, and MnCl2) have been studied as a working pairs of chemical heat pump. The performance of these three types against various generator, evaporator and condenser temperatures is compared. The results showed that CaCl2 is better performance than SrCl2 and MnCl 2. increasing condenser temperatures cause a decrease in chemical heat pump performance for each type while the performance of chemical heat pump increase with increasing evaporator temperatures for each types. The energy density also has been studied for the three types which the result show that CaCl2 is higher than SrCl2 and MnCl2 Considering that the 25 KW is acceptable of power for drying system.

AB - This paper presents the performance prediction of chemical heat pump for various metallic- salts for drying purpose. A simulation has been developed to simulate the effect of various operating conditions on the performance of the chemical heat pump. Three types of metallic salts (CaCl2, SrCl 2, and MnCl2) have been studied as a working pairs of chemical heat pump. The performance of these three types against various generator, evaporator and condenser temperatures is compared. The results showed that CaCl2 is better performance than SrCl2 and MnCl 2. increasing condenser temperatures cause a decrease in chemical heat pump performance for each type while the performance of chemical heat pump increase with increasing evaporator temperatures for each types. The energy density also has been studied for the three types which the result show that CaCl2 is higher than SrCl2 and MnCl2 Considering that the 25 KW is acceptable of power for drying system.

KW - (CaCl, SrCl, MnCl,) - Nh chemical heat pump

KW - Coefficient of performance

KW - Drying

KW - Energy density

UR - http://www.scopus.com/inward/record.url?scp=78149344671&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=78149344671&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:78149344671

SN - 9789604740932

SP - 262

EP - 266

BT - Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09

ER -