Pre and post processing for Boundary Element Method (BEM) 3D reinforced concrete corrosion simulation

S. Fonna, M. Ridha, S. Huzni, Israr, Ahmad Kamal Ariffin Mohd Ihsan

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Abstract

Corrosion simulation of rebar in concrete structures using BEM 3D have been developed. However, pre processing procedure such as geometry development and meshing is still performed manually. In addition, the visualization of BEM simulation results is still illustrated using the simple chart and graph. Nowadays, many softwares have been developed under open source platform that can be used freely. There is open source softwares for CAE purposes such as Salome and VisIt. The aim of this study is to implement the open source software as pre- and post-processing for the developed BEM 3D code in order to simulate corrosion of reinforced concrete. Salome 2.3.9 is used for developing geometry and meshing the model. The visualization of the simulation results are conducted using VisIt 1.8. The study shows that the open source software i.e. Salome and VisIt, perform well as pre and post processing of developed code for simulating the corrosion of reinforced concrete. It shows that the meshing procedure and the interpretation of results become simpler and easier.

Original languageEnglish
Title of host publicationKey Engineering Materials
Pages230-235
Number of pages6
Volume462-463
DOIs
Publication statusPublished - 2011
Externally publishedYes
Event8th International Conference on Fracture and Strength of Solids 2010, FEOFS2010 - Kuala Lumpur
Duration: 7 Jun 20109 Jun 2010

Publication series

NameKey Engineering Materials
Volume462-463
ISSN (Print)10139826

Other

Other8th International Conference on Fracture and Strength of Solids 2010, FEOFS2010
CityKuala Lumpur
Period7/6/109/6/10

Fingerprint

Boundary element method
Reinforced concrete
Corrosion
Processing
Visualization
Geometry
Computer aided engineering
Concrete construction
Open source software

Keywords

  • Boundary Element Method BEM
  • Corrosion
  • Open source
  • Pre- and post-processing
  • Reinforced concrete
  • Simulation

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Fonna, S., Ridha, M., Huzni, S., Israr, & Mohd Ihsan, A. K. A. (2011). Pre and post processing for Boundary Element Method (BEM) 3D reinforced concrete corrosion simulation. In Key Engineering Materials (Vol. 462-463, pp. 230-235). (Key Engineering Materials; Vol. 462-463). https://doi.org/10.4028/www.scientific.net/KEM.462-463.230

Pre and post processing for Boundary Element Method (BEM) 3D reinforced concrete corrosion simulation. / Fonna, S.; Ridha, M.; Huzni, S.; Israr, ; Mohd Ihsan, Ahmad Kamal Ariffin.

Key Engineering Materials. Vol. 462-463 2011. p. 230-235 (Key Engineering Materials; Vol. 462-463).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fonna, S, Ridha, M, Huzni, S, Israr, & Mohd Ihsan, AKA 2011, Pre and post processing for Boundary Element Method (BEM) 3D reinforced concrete corrosion simulation. in Key Engineering Materials. vol. 462-463, Key Engineering Materials, vol. 462-463, pp. 230-235, 8th International Conference on Fracture and Strength of Solids 2010, FEOFS2010, Kuala Lumpur, 7/6/10. https://doi.org/10.4028/www.scientific.net/KEM.462-463.230
Fonna S, Ridha M, Huzni S, Israr , Mohd Ihsan AKA. Pre and post processing for Boundary Element Method (BEM) 3D reinforced concrete corrosion simulation. In Key Engineering Materials. Vol. 462-463. 2011. p. 230-235. (Key Engineering Materials). https://doi.org/10.4028/www.scientific.net/KEM.462-463.230
Fonna, S. ; Ridha, M. ; Huzni, S. ; Israr, ; Mohd Ihsan, Ahmad Kamal Ariffin. / Pre and post processing for Boundary Element Method (BEM) 3D reinforced concrete corrosion simulation. Key Engineering Materials. Vol. 462-463 2011. pp. 230-235 (Key Engineering Materials).
@inproceedings{1107529579884706aa2761b6dbd77e1b,
title = "Pre and post processing for Boundary Element Method (BEM) 3D reinforced concrete corrosion simulation",
abstract = "Corrosion simulation of rebar in concrete structures using BEM 3D have been developed. However, pre processing procedure such as geometry development and meshing is still performed manually. In addition, the visualization of BEM simulation results is still illustrated using the simple chart and graph. Nowadays, many softwares have been developed under open source platform that can be used freely. There is open source softwares for CAE purposes such as Salome and VisIt. The aim of this study is to implement the open source software as pre- and post-processing for the developed BEM 3D code in order to simulate corrosion of reinforced concrete. Salome 2.3.9 is used for developing geometry and meshing the model. The visualization of the simulation results are conducted using VisIt 1.8. The study shows that the open source software i.e. Salome and VisIt, perform well as pre and post processing of developed code for simulating the corrosion of reinforced concrete. It shows that the meshing procedure and the interpretation of results become simpler and easier.",
keywords = "Boundary Element Method BEM, Corrosion, Open source, Pre- and post-processing, Reinforced concrete, Simulation",
author = "S. Fonna and M. Ridha and S. Huzni and Israr and {Mohd Ihsan}, {Ahmad Kamal Ariffin}",
year = "2011",
doi = "10.4028/www.scientific.net/KEM.462-463.230",
language = "English",
isbn = "9780878492107",
volume = "462-463",
series = "Key Engineering Materials",
pages = "230--235",
booktitle = "Key Engineering Materials",

}

TY - GEN

T1 - Pre and post processing for Boundary Element Method (BEM) 3D reinforced concrete corrosion simulation

AU - Fonna, S.

AU - Ridha, M.

AU - Huzni, S.

AU - Israr,

AU - Mohd Ihsan, Ahmad Kamal Ariffin

PY - 2011

Y1 - 2011

N2 - Corrosion simulation of rebar in concrete structures using BEM 3D have been developed. However, pre processing procedure such as geometry development and meshing is still performed manually. In addition, the visualization of BEM simulation results is still illustrated using the simple chart and graph. Nowadays, many softwares have been developed under open source platform that can be used freely. There is open source softwares for CAE purposes such as Salome and VisIt. The aim of this study is to implement the open source software as pre- and post-processing for the developed BEM 3D code in order to simulate corrosion of reinforced concrete. Salome 2.3.9 is used for developing geometry and meshing the model. The visualization of the simulation results are conducted using VisIt 1.8. The study shows that the open source software i.e. Salome and VisIt, perform well as pre and post processing of developed code for simulating the corrosion of reinforced concrete. It shows that the meshing procedure and the interpretation of results become simpler and easier.

AB - Corrosion simulation of rebar in concrete structures using BEM 3D have been developed. However, pre processing procedure such as geometry development and meshing is still performed manually. In addition, the visualization of BEM simulation results is still illustrated using the simple chart and graph. Nowadays, many softwares have been developed under open source platform that can be used freely. There is open source softwares for CAE purposes such as Salome and VisIt. The aim of this study is to implement the open source software as pre- and post-processing for the developed BEM 3D code in order to simulate corrosion of reinforced concrete. Salome 2.3.9 is used for developing geometry and meshing the model. The visualization of the simulation results are conducted using VisIt 1.8. The study shows that the open source software i.e. Salome and VisIt, perform well as pre and post processing of developed code for simulating the corrosion of reinforced concrete. It shows that the meshing procedure and the interpretation of results become simpler and easier.

KW - Boundary Element Method BEM

KW - Corrosion

KW - Open source

KW - Pre- and post-processing

KW - Reinforced concrete

KW - Simulation

UR - http://www.scopus.com/inward/record.url?scp=79551485113&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=79551485113&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/KEM.462-463.230

DO - 10.4028/www.scientific.net/KEM.462-463.230

M3 - Conference contribution

AN - SCOPUS:79551485113

SN - 9780878492107

VL - 462-463

T3 - Key Engineering Materials

SP - 230

EP - 235

BT - Key Engineering Materials

ER -