Kontrola częstotliwości wzmacniacza mocy wykorzystywanego do zasilania bio-implantów

Translated title of the contribution: Power amplifier frequency controller using feedback control techniques for bio-implanted devices

Hussein A. Hussein, Hannan M A, Saad Mutashar, Salina Abdul Samad, Anuar Mikdad Muad

Research output: Contribution to journalArticle

Abstract

Switch mode power amplifier is used in biomedical devices widely. The power amplifier supplies the required operating power to the implanted devices. Zero voltage switching (ZVS) operation of class-E power amplifier leads to convert DC voltage to AC with high efficiency and workings frequency. Frequency has a great function in powering most of the biomedical implanted devices. Frequency shift caused by inductors and capacitors used in the circuit can cause load variation or changing in mutual displacement or they may lead to instability and data loss of the implanted devices. So switching-mode frequency control is the key problem in the biomedical device powering system. This paper focused on the design of a frequency controlled power amplifier to improve the controller’s efficiency in terms of speed and better results. The objective of this work is to control the operating frequency. Feedback control method is used by using proportional integral derivative controller (PID), proportional integral (PI) and voltage controlled oscillator (VCO) to reduce the phase shift and settling time. The Bode plot and Nyquist stability criterion analyses show that the developed power amplifier frequency controller is stable and perform well to improve the controller efficiency.

Original languagePolish
Pages (from-to)34-37
Number of pages4
JournalPrzeglad Elektrotechniczny
Volume1
Issue number12
DOIs
Publication statusPublished - 2015

Fingerprint

Power amplifiers
Feedback control
Controllers
Zero voltage switching
Variable frequency oscillators
Stability criteria
Phase shift
Capacitors
Switches
Derivatives
Networks (circuits)
Electric potential

Keywords

  • Biomedical implanted devices
  • Class-E power amplifier
  • Frequency control
  • PID controller
  • Voltage controlled oscillator (VCO)

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Cite this

Kontrola częstotliwości wzmacniacza mocy wykorzystywanego do zasilania bio-implantów. / Hussein, Hussein A.; M A, Hannan; Mutashar, Saad; Abdul Samad, Salina; Muad, Anuar Mikdad.

In: Przeglad Elektrotechniczny, Vol. 1, No. 12, 2015, p. 34-37.

Research output: Contribution to journalArticle

@article{887175827643460ea4d6f69b12e2218c,
title = "Kontrola częstotliwości wzmacniacza mocy wykorzystywanego do zasilania bio-implant{\'o}w",
abstract = "Switch mode power amplifier is used in biomedical devices widely. The power amplifier supplies the required operating power to the implanted devices. Zero voltage switching (ZVS) operation of class-E power amplifier leads to convert DC voltage to AC with high efficiency and workings frequency. Frequency has a great function in powering most of the biomedical implanted devices. Frequency shift caused by inductors and capacitors used in the circuit can cause load variation or changing in mutual displacement or they may lead to instability and data loss of the implanted devices. So switching-mode frequency control is the key problem in the biomedical device powering system. This paper focused on the design of a frequency controlled power amplifier to improve the controller’s efficiency in terms of speed and better results. The objective of this work is to control the operating frequency. Feedback control method is used by using proportional integral derivative controller (PID), proportional integral (PI) and voltage controlled oscillator (VCO) to reduce the phase shift and settling time. The Bode plot and Nyquist stability criterion analyses show that the developed power amplifier frequency controller is stable and perform well to improve the controller efficiency.",
keywords = "Biomedical implanted devices, Class-E power amplifier, Frequency control, PID controller, Voltage controlled oscillator (VCO)",
author = "Hussein, {Hussein A.} and {M A}, Hannan and Saad Mutashar and {Abdul Samad}, Salina and Muad, {Anuar Mikdad}",
year = "2015",
doi = "10.15199/48.2015.12.07",
language = "Polish",
volume = "1",
pages = "34--37",
journal = "Przeglad Elektrotechniczny",
issn = "0033-2097",
publisher = "Wydawnictwo SIGMA - N O T Sp. z o.o.",
number = "12",

}

TY - JOUR

T1 - Kontrola częstotliwości wzmacniacza mocy wykorzystywanego do zasilania bio-implantów

AU - Hussein, Hussein A.

AU - M A, Hannan

AU - Mutashar, Saad

AU - Abdul Samad, Salina

AU - Muad, Anuar Mikdad

PY - 2015

Y1 - 2015

N2 - Switch mode power amplifier is used in biomedical devices widely. The power amplifier supplies the required operating power to the implanted devices. Zero voltage switching (ZVS) operation of class-E power amplifier leads to convert DC voltage to AC with high efficiency and workings frequency. Frequency has a great function in powering most of the biomedical implanted devices. Frequency shift caused by inductors and capacitors used in the circuit can cause load variation or changing in mutual displacement or they may lead to instability and data loss of the implanted devices. So switching-mode frequency control is the key problem in the biomedical device powering system. This paper focused on the design of a frequency controlled power amplifier to improve the controller’s efficiency in terms of speed and better results. The objective of this work is to control the operating frequency. Feedback control method is used by using proportional integral derivative controller (PID), proportional integral (PI) and voltage controlled oscillator (VCO) to reduce the phase shift and settling time. The Bode plot and Nyquist stability criterion analyses show that the developed power amplifier frequency controller is stable and perform well to improve the controller efficiency.

AB - Switch mode power amplifier is used in biomedical devices widely. The power amplifier supplies the required operating power to the implanted devices. Zero voltage switching (ZVS) operation of class-E power amplifier leads to convert DC voltage to AC with high efficiency and workings frequency. Frequency has a great function in powering most of the biomedical implanted devices. Frequency shift caused by inductors and capacitors used in the circuit can cause load variation or changing in mutual displacement or they may lead to instability and data loss of the implanted devices. So switching-mode frequency control is the key problem in the biomedical device powering system. This paper focused on the design of a frequency controlled power amplifier to improve the controller’s efficiency in terms of speed and better results. The objective of this work is to control the operating frequency. Feedback control method is used by using proportional integral derivative controller (PID), proportional integral (PI) and voltage controlled oscillator (VCO) to reduce the phase shift and settling time. The Bode plot and Nyquist stability criterion analyses show that the developed power amplifier frequency controller is stable and perform well to improve the controller efficiency.

KW - Biomedical implanted devices

KW - Class-E power amplifier

KW - Frequency control

KW - PID controller

KW - Voltage controlled oscillator (VCO)

UR - http://www.scopus.com/inward/record.url?scp=85007557038&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85007557038&partnerID=8YFLogxK

U2 - 10.15199/48.2015.12.07

DO - 10.15199/48.2015.12.07

M3 - Article

AN - SCOPUS:85007557038

VL - 1

SP - 34

EP - 37

JO - Przeglad Elektrotechniczny

JF - Przeglad Elektrotechniczny

SN - 0033-2097

IS - 12

ER -