Poly(methyl methacrylate)/SiO2 hybrid membranes

Effect of solvents on structural and thermal properties

Muhammad Ali Zulfikar, Abdul Wahab Mohammad, Abdul Amir H. Kadhum, Nidal Hilal

Research output: Contribution to journalArticle

15 Citations (Scopus)

Abstract

In this paper, hybrid organic-inorganic membranes were prepared using three different solvents and characterized. The hybrid membranes were fabricated using sol-gel technique, which had polymethyl-methacrylate (PMMA) and tetraethyl orthosilicate (TEOS) as materials, with 80/20 ratio. The thin films were then characterized using FTIR, SEM, EDX, and mapping techniques. From the preliminary characterization, hybrid membranes were found to have nano and ultra scale tight-pores ranges, which was influenced by the solvent used. The SEM images clearly show that hybrid membranes have homogenous and smooth surface. FTIR spectroscopy uncovered all the signature peaks characteristic of silicate structures in the near-surface regions. Fingerprints of Si-O-Si groups in cyclic and linear molecular substructures were also present. From DSC analysis, the Tg value of the PMMA moieties in hybrids membranes was in the order H-15-Toluene < Pure PMMA < H-15-THF < H-15-DMF. Furthermore, from TGA analysis it was found that the hybrid membranes have higher thermal stability compared with that of pure PMMA. EDX and mapping analysis showed that the composition and distribution of particles in the membranes were different and dependent on the solvents used.

Original languageEnglish
Pages (from-to)3163-3171
Number of pages9
JournalJournal of Applied Polymer Science
Volume99
Issue number6
DOIs
Publication statusPublished - 15 Feb 2006

Fingerprint

Polymethyl Methacrylate
Polymethyl methacrylates
Structural properties
Thermodynamic properties
Membranes
Energy dispersive spectroscopy
Silicates
Scanning electron microscopy
Toluene
Sol-gels
Thermodynamic stability
Spectroscopy
Thin films
Chemical analysis

Keywords

  • Hybrid membrane
  • Inorganic-organic
  • Permeability
  • PMMA/TEOS
  • Sol-gel

ASJC Scopus subject areas

  • Polymers and Plastics

Cite this

Poly(methyl methacrylate)/SiO2 hybrid membranes : Effect of solvents on structural and thermal properties. / Zulfikar, Muhammad Ali; Mohammad, Abdul Wahab; Kadhum, Abdul Amir H.; Hilal, Nidal.

In: Journal of Applied Polymer Science, Vol. 99, No. 6, 15.02.2006, p. 3163-3171.

Research output: Contribution to journalArticle

@article{7535d5e1accb4bf78583684d3b2f8bca,
title = "Poly(methyl methacrylate)/SiO2 hybrid membranes: Effect of solvents on structural and thermal properties",
abstract = "In this paper, hybrid organic-inorganic membranes were prepared using three different solvents and characterized. The hybrid membranes were fabricated using sol-gel technique, which had polymethyl-methacrylate (PMMA) and tetraethyl orthosilicate (TEOS) as materials, with 80/20 ratio. The thin films were then characterized using FTIR, SEM, EDX, and mapping techniques. From the preliminary characterization, hybrid membranes were found to have nano and ultra scale tight-pores ranges, which was influenced by the solvent used. The SEM images clearly show that hybrid membranes have homogenous and smooth surface. FTIR spectroscopy uncovered all the signature peaks characteristic of silicate structures in the near-surface regions. Fingerprints of Si-O-Si groups in cyclic and linear molecular substructures were also present. From DSC analysis, the Tg value of the PMMA moieties in hybrids membranes was in the order H-15-Toluene < Pure PMMA < H-15-THF < H-15-DMF. Furthermore, from TGA analysis it was found that the hybrid membranes have higher thermal stability compared with that of pure PMMA. EDX and mapping analysis showed that the composition and distribution of particles in the membranes were different and dependent on the solvents used.",
keywords = "Hybrid membrane, Inorganic-organic, Permeability, PMMA/TEOS, Sol-gel",
author = "Zulfikar, {Muhammad Ali} and Mohammad, {Abdul Wahab} and Kadhum, {Abdul Amir H.} and Nidal Hilal",
year = "2006",
month = "2",
day = "15",
doi = "10.1002/app.22862",
language = "English",
volume = "99",
pages = "3163--3171",
journal = "Journal of Applied Polymer Science",
issn = "0021-8995",
publisher = "John Wiley and Sons Inc.",
number = "6",

}

TY - JOUR

T1 - Poly(methyl methacrylate)/SiO2 hybrid membranes

T2 - Effect of solvents on structural and thermal properties

AU - Zulfikar, Muhammad Ali

AU - Mohammad, Abdul Wahab

AU - Kadhum, Abdul Amir H.

AU - Hilal, Nidal

PY - 2006/2/15

Y1 - 2006/2/15

N2 - In this paper, hybrid organic-inorganic membranes were prepared using three different solvents and characterized. The hybrid membranes were fabricated using sol-gel technique, which had polymethyl-methacrylate (PMMA) and tetraethyl orthosilicate (TEOS) as materials, with 80/20 ratio. The thin films were then characterized using FTIR, SEM, EDX, and mapping techniques. From the preliminary characterization, hybrid membranes were found to have nano and ultra scale tight-pores ranges, which was influenced by the solvent used. The SEM images clearly show that hybrid membranes have homogenous and smooth surface. FTIR spectroscopy uncovered all the signature peaks characteristic of silicate structures in the near-surface regions. Fingerprints of Si-O-Si groups in cyclic and linear molecular substructures were also present. From DSC analysis, the Tg value of the PMMA moieties in hybrids membranes was in the order H-15-Toluene < Pure PMMA < H-15-THF < H-15-DMF. Furthermore, from TGA analysis it was found that the hybrid membranes have higher thermal stability compared with that of pure PMMA. EDX and mapping analysis showed that the composition and distribution of particles in the membranes were different and dependent on the solvents used.

AB - In this paper, hybrid organic-inorganic membranes were prepared using three different solvents and characterized. The hybrid membranes were fabricated using sol-gel technique, which had polymethyl-methacrylate (PMMA) and tetraethyl orthosilicate (TEOS) as materials, with 80/20 ratio. The thin films were then characterized using FTIR, SEM, EDX, and mapping techniques. From the preliminary characterization, hybrid membranes were found to have nano and ultra scale tight-pores ranges, which was influenced by the solvent used. The SEM images clearly show that hybrid membranes have homogenous and smooth surface. FTIR spectroscopy uncovered all the signature peaks characteristic of silicate structures in the near-surface regions. Fingerprints of Si-O-Si groups in cyclic and linear molecular substructures were also present. From DSC analysis, the Tg value of the PMMA moieties in hybrids membranes was in the order H-15-Toluene < Pure PMMA < H-15-THF < H-15-DMF. Furthermore, from TGA analysis it was found that the hybrid membranes have higher thermal stability compared with that of pure PMMA. EDX and mapping analysis showed that the composition and distribution of particles in the membranes were different and dependent on the solvents used.

KW - Hybrid membrane

KW - Inorganic-organic

KW - Permeability

KW - PMMA/TEOS

KW - Sol-gel

UR - http://www.scopus.com/inward/record.url?scp=33644504198&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33644504198&partnerID=8YFLogxK

U2 - 10.1002/app.22862

DO - 10.1002/app.22862

M3 - Article

VL - 99

SP - 3163

EP - 3171

JO - Journal of Applied Polymer Science

JF - Journal of Applied Polymer Science

SN - 0021-8995

IS - 6

ER -