Performance of polymer modified mortar with different dosage of polymeric modifier

Shankar Ganesan, Md Azree Othuman Mydin, Norazmawati Md Sani, Adi Irfan Che Ani

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Abstract

Polymer modified mortar system is defined as hydraulic cement combined at the time of mixing with organic polymers that are dispersed or re-dispersed in water, with or without aggregates. The compressive strength and flexural strength of polymer modified mortar obtained at early age are low and it required prolong curing period for the strength enhancement. In order to enhance the mechanical properties of cementitious mixture as well as its durability, hybridization of polymeric modifiers are applied into cementitious mixture specimens. Thus, this study is intended to examine the mechanical properties of hybrid polymer modified mortar system at various levels of polymeric modifier dosage; styrene-butadiene rubber (SBR) latex and epoxy resin. Laboratory tests for density, compressive strength and flexural strength were carried out to determine the strength of hybrid polymer modified mortar. In this study, the hybrid polymer of SBR latex with epoxy resin gives discontented results compared to unmodified cement system. The results of density, compressive strength and flexural strength of hybrid polymer modified cement system had shown negative outcomes and did not make any improvement to cement system.

Original languageEnglish
Title of host publicationMATEC Web of Conferences
PublisherEDP Sciences
Volume15
DOIs
Publication statusPublished - 2014
EventBuilding Surveying, Facilities Management and Engineering Conference, BSFMEC 2014 - Seri Iskandar, Perak, Malaysia
Duration: 27 Aug 201427 Aug 2014

Other

OtherBuilding Surveying, Facilities Management and Engineering Conference, BSFMEC 2014
CountryMalaysia
CitySeri Iskandar, Perak
Period27/8/1427/8/14

Fingerprint

Mortar
Polymers
Cements
Bending strength
Compressive strength
Epoxy Resins
Latex
Latexes
Butadiene
Epoxy resins
Styrene
Rubber
Mechanical properties
Organic polymers
Curing
Durability
Hydraulics
Water

ASJC Scopus subject areas

  • Chemistry(all)
  • Engineering(all)
  • Materials Science(all)

Cite this

Ganesan, S., Othuman Mydin, M. A., Sani, N. M., & Che Ani, A. I. (2014). Performance of polymer modified mortar with different dosage of polymeric modifier. In MATEC Web of Conferences (Vol. 15). [01039] EDP Sciences. https://doi.org/10.1051/matecconf/20141501039

Performance of polymer modified mortar with different dosage of polymeric modifier. / Ganesan, Shankar; Othuman Mydin, Md Azree; Sani, Norazmawati Md; Che Ani, Adi Irfan.

MATEC Web of Conferences. Vol. 15 EDP Sciences, 2014. 01039.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ganesan, S, Othuman Mydin, MA, Sani, NM & Che Ani, AI 2014, Performance of polymer modified mortar with different dosage of polymeric modifier. in MATEC Web of Conferences. vol. 15, 01039, EDP Sciences, Building Surveying, Facilities Management and Engineering Conference, BSFMEC 2014, Seri Iskandar, Perak, Malaysia, 27/8/14. https://doi.org/10.1051/matecconf/20141501039
Ganesan S, Othuman Mydin MA, Sani NM, Che Ani AI. Performance of polymer modified mortar with different dosage of polymeric modifier. In MATEC Web of Conferences. Vol. 15. EDP Sciences. 2014. 01039 https://doi.org/10.1051/matecconf/20141501039
Ganesan, Shankar ; Othuman Mydin, Md Azree ; Sani, Norazmawati Md ; Che Ani, Adi Irfan. / Performance of polymer modified mortar with different dosage of polymeric modifier. MATEC Web of Conferences. Vol. 15 EDP Sciences, 2014.
@inproceedings{2284466d9fd641b5a25b5c325fd812bb,
title = "Performance of polymer modified mortar with different dosage of polymeric modifier",
abstract = "Polymer modified mortar system is defined as hydraulic cement combined at the time of mixing with organic polymers that are dispersed or re-dispersed in water, with or without aggregates. The compressive strength and flexural strength of polymer modified mortar obtained at early age are low and it required prolong curing period for the strength enhancement. In order to enhance the mechanical properties of cementitious mixture as well as its durability, hybridization of polymeric modifiers are applied into cementitious mixture specimens. Thus, this study is intended to examine the mechanical properties of hybrid polymer modified mortar system at various levels of polymeric modifier dosage; styrene-butadiene rubber (SBR) latex and epoxy resin. Laboratory tests for density, compressive strength and flexural strength were carried out to determine the strength of hybrid polymer modified mortar. In this study, the hybrid polymer of SBR latex with epoxy resin gives discontented results compared to unmodified cement system. The results of density, compressive strength and flexural strength of hybrid polymer modified cement system had shown negative outcomes and did not make any improvement to cement system.",
author = "Shankar Ganesan and {Othuman Mydin}, {Md Azree} and Sani, {Norazmawati Md} and {Che Ani}, {Adi Irfan}",
year = "2014",
doi = "10.1051/matecconf/20141501039",
language = "English",
volume = "15",
booktitle = "MATEC Web of Conferences",
publisher = "EDP Sciences",

}

TY - GEN

T1 - Performance of polymer modified mortar with different dosage of polymeric modifier

AU - Ganesan, Shankar

AU - Othuman Mydin, Md Azree

AU - Sani, Norazmawati Md

AU - Che Ani, Adi Irfan

PY - 2014

Y1 - 2014

N2 - Polymer modified mortar system is defined as hydraulic cement combined at the time of mixing with organic polymers that are dispersed or re-dispersed in water, with or without aggregates. The compressive strength and flexural strength of polymer modified mortar obtained at early age are low and it required prolong curing period for the strength enhancement. In order to enhance the mechanical properties of cementitious mixture as well as its durability, hybridization of polymeric modifiers are applied into cementitious mixture specimens. Thus, this study is intended to examine the mechanical properties of hybrid polymer modified mortar system at various levels of polymeric modifier dosage; styrene-butadiene rubber (SBR) latex and epoxy resin. Laboratory tests for density, compressive strength and flexural strength were carried out to determine the strength of hybrid polymer modified mortar. In this study, the hybrid polymer of SBR latex with epoxy resin gives discontented results compared to unmodified cement system. The results of density, compressive strength and flexural strength of hybrid polymer modified cement system had shown negative outcomes and did not make any improvement to cement system.

AB - Polymer modified mortar system is defined as hydraulic cement combined at the time of mixing with organic polymers that are dispersed or re-dispersed in water, with or without aggregates. The compressive strength and flexural strength of polymer modified mortar obtained at early age are low and it required prolong curing period for the strength enhancement. In order to enhance the mechanical properties of cementitious mixture as well as its durability, hybridization of polymeric modifiers are applied into cementitious mixture specimens. Thus, this study is intended to examine the mechanical properties of hybrid polymer modified mortar system at various levels of polymeric modifier dosage; styrene-butadiene rubber (SBR) latex and epoxy resin. Laboratory tests for density, compressive strength and flexural strength were carried out to determine the strength of hybrid polymer modified mortar. In this study, the hybrid polymer of SBR latex with epoxy resin gives discontented results compared to unmodified cement system. The results of density, compressive strength and flexural strength of hybrid polymer modified cement system had shown negative outcomes and did not make any improvement to cement system.

UR - http://www.scopus.com/inward/record.url?scp=84906692476&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84906692476&partnerID=8YFLogxK

U2 - 10.1051/matecconf/20141501039

DO - 10.1051/matecconf/20141501039

M3 - Conference contribution

VL - 15

BT - MATEC Web of Conferences

PB - EDP Sciences

ER -