Performance of infilled profiled steel sheet dry board pssdb load bearing wall

Wan Hamidon Wan Badaruzzaman, Harsoyo Mohamad Shodiq, Arzan Abdul Hamid

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

This paper describes the testing of Profiled Steel Sheet Dry Board (PSSDB) load bearing wall system. Experimental tests were conducted on various PSSDB wall samples, with and without infill materials to study its effect on the PSSDB load bearing wall performance. A proprietary profiled steel sheet, Ajiya Cliplock (0.48 mm thick) attached to Cemboard (10 mm thick) on one side, and Cemplank (10 mm thick) on the other side, via self drilling, self tapping screws spaced at 200 mm centre to centre were used for the tests. The height of the tested panels was all fixed at 3 metres. Results show that the ultimate loads at failure were between 28 kN to 45 kN, and between 158 kN to 182 kN for panels without and with infill materials respectively. Panels filled with polystyrene mortar show better axial load performance than panels without infill materials.

Original languageEnglish
Pages (from-to)343-348
Number of pages6
JournalInternational Journal of Engineering, Transactions B: Applications
Volume17
Issue number4
Publication statusPublished - Dec 2004

Fingerprint

Bearings (structural)
Steel sheet
Axial loads
Mortar
Polystyrenes
Drilling
Testing

Keywords

  • Composite
  • Dry board
  • Infilled
  • Load bearing wall
  • Profiled steel sheet

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Performance of infilled profiled steel sheet dry board pssdb load bearing wall. / Wan Badaruzzaman, Wan Hamidon; Shodiq, Harsoyo Mohamad; Hamid, Arzan Abdul.

In: International Journal of Engineering, Transactions B: Applications, Vol. 17, No. 4, 12.2004, p. 343-348.

Research output: Contribution to journalArticle

@article{ba416a2c53db4f3abbe97e6b6fd38220,
title = "Performance of infilled profiled steel sheet dry board pssdb load bearing wall",
abstract = "This paper describes the testing of Profiled Steel Sheet Dry Board (PSSDB) load bearing wall system. Experimental tests were conducted on various PSSDB wall samples, with and without infill materials to study its effect on the PSSDB load bearing wall performance. A proprietary profiled steel sheet, Ajiya Cliplock (0.48 mm thick) attached to Cemboard (10 mm thick) on one side, and Cemplank (10 mm thick) on the other side, via self drilling, self tapping screws spaced at 200 mm centre to centre were used for the tests. The height of the tested panels was all fixed at 3 metres. Results show that the ultimate loads at failure were between 28 kN to 45 kN, and between 158 kN to 182 kN for panels without and with infill materials respectively. Panels filled with polystyrene mortar show better axial load performance than panels without infill materials.",
keywords = "Composite, Dry board, Infilled, Load bearing wall, Profiled steel sheet",
author = "{Wan Badaruzzaman}, {Wan Hamidon} and Shodiq, {Harsoyo Mohamad} and Hamid, {Arzan Abdul}",
year = "2004",
month = "12",
language = "English",
volume = "17",
pages = "343--348",
journal = "International Journal of Engineering, Transactions B: Applications",
issn = "1025-2495",
number = "4",

}

TY - JOUR

T1 - Performance of infilled profiled steel sheet dry board pssdb load bearing wall

AU - Wan Badaruzzaman, Wan Hamidon

AU - Shodiq, Harsoyo Mohamad

AU - Hamid, Arzan Abdul

PY - 2004/12

Y1 - 2004/12

N2 - This paper describes the testing of Profiled Steel Sheet Dry Board (PSSDB) load bearing wall system. Experimental tests were conducted on various PSSDB wall samples, with and without infill materials to study its effect on the PSSDB load bearing wall performance. A proprietary profiled steel sheet, Ajiya Cliplock (0.48 mm thick) attached to Cemboard (10 mm thick) on one side, and Cemplank (10 mm thick) on the other side, via self drilling, self tapping screws spaced at 200 mm centre to centre were used for the tests. The height of the tested panels was all fixed at 3 metres. Results show that the ultimate loads at failure were between 28 kN to 45 kN, and between 158 kN to 182 kN for panels without and with infill materials respectively. Panels filled with polystyrene mortar show better axial load performance than panels without infill materials.

AB - This paper describes the testing of Profiled Steel Sheet Dry Board (PSSDB) load bearing wall system. Experimental tests were conducted on various PSSDB wall samples, with and without infill materials to study its effect on the PSSDB load bearing wall performance. A proprietary profiled steel sheet, Ajiya Cliplock (0.48 mm thick) attached to Cemboard (10 mm thick) on one side, and Cemplank (10 mm thick) on the other side, via self drilling, self tapping screws spaced at 200 mm centre to centre were used for the tests. The height of the tested panels was all fixed at 3 metres. Results show that the ultimate loads at failure were between 28 kN to 45 kN, and between 158 kN to 182 kN for panels without and with infill materials respectively. Panels filled with polystyrene mortar show better axial load performance than panels without infill materials.

KW - Composite

KW - Dry board

KW - Infilled

KW - Load bearing wall

KW - Profiled steel sheet

UR - http://www.scopus.com/inward/record.url?scp=34247160792&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=34247160792&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:34247160792

VL - 17

SP - 343

EP - 348

JO - International Journal of Engineering, Transactions B: Applications

JF - International Journal of Engineering, Transactions B: Applications

SN - 1025-2495

IS - 4

ER -