Performance evaluation and compression of some actuators and sensors piezoelectric elements

Arshed Abdulhamed Mohammed, Sallehuddin Mohamed Haris, Mohd. Zaki Nuawi

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

This paper describes three types of piezoelectric structures that can be used as an actuator and as a sensor. These types are the Bender Element, the Plate Transducer and the Trigger-Accelerometer. Variations in usage, the internal structure and the direction of polarization are explained in order to understand the differences between the types and the responses of the piezoelectric structures. Among the many methods that are used for analyzing and building the transfer function of piezoelectric structures, the lumped parameter model was chosen as the method of analysis. This method proved very active in analyzing the effects of the internal parameters such as the dimensions of the piezoelectric structure and the elastic constant for the output response. In addition, after the transfer functions of the actuator and the sensor were built, the effect of the input signal types to the actuator and the sensor, such as the sine wave and pulse were analyzed. Finally, the results that were obtained, were compared with other previous works, and the results were very close.

Original languageEnglish
Title of host publicationProceedings - 2012 International Symposium on Instrumentation and Measurement, Sensor Network and Automation, IMSNA 2012
Pages65-70
Number of pages6
Volume1
DOIs
Publication statusPublished - 2012
Event2012 International Symposium on Instrumentation and Measurement, Sensor Network and Automation, IMSNA 2012 - Sanya, Hainan
Duration: 25 Aug 201228 Aug 2012

Other

Other2012 International Symposium on Instrumentation and Measurement, Sensor Network and Automation, IMSNA 2012
CitySanya, Hainan
Period25/8/1228/8/12

Fingerprint

Actuators
Transfer functions
Sensors
Elastic constants
Accelerometers
Transducers
Polarization

Keywords

  • actuate
  • equivalent circuit
  • piezoelectric
  • polarizatio
  • sensor

ASJC Scopus subject areas

  • Computer Networks and Communications
  • Electrical and Electronic Engineering

Cite this

Mohammed, A. A., Mohamed Haris, S., & Nuawi, M. Z. (2012). Performance evaluation and compression of some actuators and sensors piezoelectric elements. In Proceedings - 2012 International Symposium on Instrumentation and Measurement, Sensor Network and Automation, IMSNA 2012 (Vol. 1, pp. 65-70). [6324517] https://doi.org/10.1109/MSNA.2012.6324517

Performance evaluation and compression of some actuators and sensors piezoelectric elements. / Mohammed, Arshed Abdulhamed; Mohamed Haris, Sallehuddin; Nuawi, Mohd. Zaki.

Proceedings - 2012 International Symposium on Instrumentation and Measurement, Sensor Network and Automation, IMSNA 2012. Vol. 1 2012. p. 65-70 6324517.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mohammed, AA, Mohamed Haris, S & Nuawi, MZ 2012, Performance evaluation and compression of some actuators and sensors piezoelectric elements. in Proceedings - 2012 International Symposium on Instrumentation and Measurement, Sensor Network and Automation, IMSNA 2012. vol. 1, 6324517, pp. 65-70, 2012 International Symposium on Instrumentation and Measurement, Sensor Network and Automation, IMSNA 2012, Sanya, Hainan, 25/8/12. https://doi.org/10.1109/MSNA.2012.6324517
Mohammed AA, Mohamed Haris S, Nuawi MZ. Performance evaluation and compression of some actuators and sensors piezoelectric elements. In Proceedings - 2012 International Symposium on Instrumentation and Measurement, Sensor Network and Automation, IMSNA 2012. Vol. 1. 2012. p. 65-70. 6324517 https://doi.org/10.1109/MSNA.2012.6324517
Mohammed, Arshed Abdulhamed ; Mohamed Haris, Sallehuddin ; Nuawi, Mohd. Zaki. / Performance evaluation and compression of some actuators and sensors piezoelectric elements. Proceedings - 2012 International Symposium on Instrumentation and Measurement, Sensor Network and Automation, IMSNA 2012. Vol. 1 2012. pp. 65-70
@inproceedings{492daf207ed7411cbcaf8ec1f4c327c5,
title = "Performance evaluation and compression of some actuators and sensors piezoelectric elements",
abstract = "This paper describes three types of piezoelectric structures that can be used as an actuator and as a sensor. These types are the Bender Element, the Plate Transducer and the Trigger-Accelerometer. Variations in usage, the internal structure and the direction of polarization are explained in order to understand the differences between the types and the responses of the piezoelectric structures. Among the many methods that are used for analyzing and building the transfer function of piezoelectric structures, the lumped parameter model was chosen as the method of analysis. This method proved very active in analyzing the effects of the internal parameters such as the dimensions of the piezoelectric structure and the elastic constant for the output response. In addition, after the transfer functions of the actuator and the sensor were built, the effect of the input signal types to the actuator and the sensor, such as the sine wave and pulse were analyzed. Finally, the results that were obtained, were compared with other previous works, and the results were very close.",
keywords = "actuate, equivalent circuit, piezoelectric, polarizatio, sensor",
author = "Mohammed, {Arshed Abdulhamed} and {Mohamed Haris}, Sallehuddin and Nuawi, {Mohd. Zaki}",
year = "2012",
doi = "10.1109/MSNA.2012.6324517",
language = "English",
isbn = "9781467324670",
volume = "1",
pages = "65--70",
booktitle = "Proceedings - 2012 International Symposium on Instrumentation and Measurement, Sensor Network and Automation, IMSNA 2012",

}

TY - GEN

T1 - Performance evaluation and compression of some actuators and sensors piezoelectric elements

AU - Mohammed, Arshed Abdulhamed

AU - Mohamed Haris, Sallehuddin

AU - Nuawi, Mohd. Zaki

PY - 2012

Y1 - 2012

N2 - This paper describes three types of piezoelectric structures that can be used as an actuator and as a sensor. These types are the Bender Element, the Plate Transducer and the Trigger-Accelerometer. Variations in usage, the internal structure and the direction of polarization are explained in order to understand the differences between the types and the responses of the piezoelectric structures. Among the many methods that are used for analyzing and building the transfer function of piezoelectric structures, the lumped parameter model was chosen as the method of analysis. This method proved very active in analyzing the effects of the internal parameters such as the dimensions of the piezoelectric structure and the elastic constant for the output response. In addition, after the transfer functions of the actuator and the sensor were built, the effect of the input signal types to the actuator and the sensor, such as the sine wave and pulse were analyzed. Finally, the results that were obtained, were compared with other previous works, and the results were very close.

AB - This paper describes three types of piezoelectric structures that can be used as an actuator and as a sensor. These types are the Bender Element, the Plate Transducer and the Trigger-Accelerometer. Variations in usage, the internal structure and the direction of polarization are explained in order to understand the differences between the types and the responses of the piezoelectric structures. Among the many methods that are used for analyzing and building the transfer function of piezoelectric structures, the lumped parameter model was chosen as the method of analysis. This method proved very active in analyzing the effects of the internal parameters such as the dimensions of the piezoelectric structure and the elastic constant for the output response. In addition, after the transfer functions of the actuator and the sensor were built, the effect of the input signal types to the actuator and the sensor, such as the sine wave and pulse were analyzed. Finally, the results that were obtained, were compared with other previous works, and the results were very close.

KW - actuate

KW - equivalent circuit

KW - piezoelectric

KW - polarizatio

KW - sensor

UR - http://www.scopus.com/inward/record.url?scp=84869217548&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84869217548&partnerID=8YFLogxK

U2 - 10.1109/MSNA.2012.6324517

DO - 10.1109/MSNA.2012.6324517

M3 - Conference contribution

AN - SCOPUS:84869217548

SN - 9781467324670

VL - 1

SP - 65

EP - 70

BT - Proceedings - 2012 International Symposium on Instrumentation and Measurement, Sensor Network and Automation, IMSNA 2012

ER -