OXADM restoration scheme: Approach to optical ring network protection

Mohd Syuhaimi Ab Rahman, Sahbudin Shaari

Research output: Chapter in Book/Report/Conference proceedingConference contribution

33 Citations (Scopus)

Abstract

This paper describes our recent approach toward advanced optical ring network through the development of optical cross add and drop multiplexer (OXADM). The OXADM prototype system focuses on providing survivability through restoration against failure, such as cable cut, in ring optical network. It features two different bandwidths which operate in working and protection line in a ring configuration. Two types of restoration scheme have been proposed to assure data flow continuously by means of linear/ multiplex protection and ring protection. The BER characteristics were measured at 2.5 Gbps (OC-48) and small degradation was observed, as confirmed by a comparison of these simulation results with those obtained from systems without restoration element. The OXADM has the same features of the conventional OADM node but with more efficiency' and reliability due to internally routing mechanisms and no 'drop and re-add function' is needed to route the signal to alternative path or processed the signals in both electronic and optical domain as practice in conventional nodes today.

Original languageEnglish
Title of host publicationProceedings - 2006 IEEE International Conference on Networks, ICON 2006 - Networking-Challenges and Frontiers
Pages371-376
Number of pages6
Volume2
DOIs
Publication statusPublished - 2006
Event2006 IEEE International Conference on Networks, ICON 2006 - Networking-Challenges and Frontiers - Singapore
Duration: 13 Sep 200615 Sep 2006

Other

Other2006 IEEE International Conference on Networks, ICON 2006 - Networking-Challenges and Frontiers
CitySingapore
Period13/9/0615/9/06

Fingerprint

restoration
Restoration
Fiber optic networks
Cables
electronics
Bandwidth
Degradation
efficiency
simulation

Keywords

  • OXADM redundancy
  • Ring network

ASJC Scopus subject areas

  • Computer Networks and Communications
  • Communication

Cite this

Ab Rahman, M. S., & Shaari, S. (2006). OXADM restoration scheme: Approach to optical ring network protection. In Proceedings - 2006 IEEE International Conference on Networks, ICON 2006 - Networking-Challenges and Frontiers (Vol. 2, pp. 371-376). [4087722] https://doi.org/10.1109/ICON.2006.302651

OXADM restoration scheme : Approach to optical ring network protection. / Ab Rahman, Mohd Syuhaimi; Shaari, Sahbudin.

Proceedings - 2006 IEEE International Conference on Networks, ICON 2006 - Networking-Challenges and Frontiers. Vol. 2 2006. p. 371-376 4087722.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ab Rahman, MS & Shaari, S 2006, OXADM restoration scheme: Approach to optical ring network protection. in Proceedings - 2006 IEEE International Conference on Networks, ICON 2006 - Networking-Challenges and Frontiers. vol. 2, 4087722, pp. 371-376, 2006 IEEE International Conference on Networks, ICON 2006 - Networking-Challenges and Frontiers, Singapore, 13/9/06. https://doi.org/10.1109/ICON.2006.302651
Ab Rahman MS, Shaari S. OXADM restoration scheme: Approach to optical ring network protection. In Proceedings - 2006 IEEE International Conference on Networks, ICON 2006 - Networking-Challenges and Frontiers. Vol. 2. 2006. p. 371-376. 4087722 https://doi.org/10.1109/ICON.2006.302651
Ab Rahman, Mohd Syuhaimi ; Shaari, Sahbudin. / OXADM restoration scheme : Approach to optical ring network protection. Proceedings - 2006 IEEE International Conference on Networks, ICON 2006 - Networking-Challenges and Frontiers. Vol. 2 2006. pp. 371-376
@inproceedings{09188f5e415b4cb9a55631ad7ca3caf7,
title = "OXADM restoration scheme: Approach to optical ring network protection",
abstract = "This paper describes our recent approach toward advanced optical ring network through the development of optical cross add and drop multiplexer (OXADM). The OXADM prototype system focuses on providing survivability through restoration against failure, such as cable cut, in ring optical network. It features two different bandwidths which operate in working and protection line in a ring configuration. Two types of restoration scheme have been proposed to assure data flow continuously by means of linear/ multiplex protection and ring protection. The BER characteristics were measured at 2.5 Gbps (OC-48) and small degradation was observed, as confirmed by a comparison of these simulation results with those obtained from systems without restoration element. The OXADM has the same features of the conventional OADM node but with more efficiency' and reliability due to internally routing mechanisms and no 'drop and re-add function' is needed to route the signal to alternative path or processed the signals in both electronic and optical domain as practice in conventional nodes today.",
keywords = "OXADM redundancy, Ring network",
author = "{Ab Rahman}, {Mohd Syuhaimi} and Sahbudin Shaari",
year = "2006",
doi = "10.1109/ICON.2006.302651",
language = "English",
isbn = "0780397460",
volume = "2",
pages = "371--376",
booktitle = "Proceedings - 2006 IEEE International Conference on Networks, ICON 2006 - Networking-Challenges and Frontiers",

}

TY - GEN

T1 - OXADM restoration scheme

T2 - Approach to optical ring network protection

AU - Ab Rahman, Mohd Syuhaimi

AU - Shaari, Sahbudin

PY - 2006

Y1 - 2006

N2 - This paper describes our recent approach toward advanced optical ring network through the development of optical cross add and drop multiplexer (OXADM). The OXADM prototype system focuses on providing survivability through restoration against failure, such as cable cut, in ring optical network. It features two different bandwidths which operate in working and protection line in a ring configuration. Two types of restoration scheme have been proposed to assure data flow continuously by means of linear/ multiplex protection and ring protection. The BER characteristics were measured at 2.5 Gbps (OC-48) and small degradation was observed, as confirmed by a comparison of these simulation results with those obtained from systems without restoration element. The OXADM has the same features of the conventional OADM node but with more efficiency' and reliability due to internally routing mechanisms and no 'drop and re-add function' is needed to route the signal to alternative path or processed the signals in both electronic and optical domain as practice in conventional nodes today.

AB - This paper describes our recent approach toward advanced optical ring network through the development of optical cross add and drop multiplexer (OXADM). The OXADM prototype system focuses on providing survivability through restoration against failure, such as cable cut, in ring optical network. It features two different bandwidths which operate in working and protection line in a ring configuration. Two types of restoration scheme have been proposed to assure data flow continuously by means of linear/ multiplex protection and ring protection. The BER characteristics were measured at 2.5 Gbps (OC-48) and small degradation was observed, as confirmed by a comparison of these simulation results with those obtained from systems without restoration element. The OXADM has the same features of the conventional OADM node but with more efficiency' and reliability due to internally routing mechanisms and no 'drop and re-add function' is needed to route the signal to alternative path or processed the signals in both electronic and optical domain as practice in conventional nodes today.

KW - OXADM redundancy

KW - Ring network

UR - http://www.scopus.com/inward/record.url?scp=36349000201&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=36349000201&partnerID=8YFLogxK

U2 - 10.1109/ICON.2006.302651

DO - 10.1109/ICON.2006.302651

M3 - Conference contribution

AN - SCOPUS:36349000201

SN - 0780397460

SN - 9780780397460

VL - 2

SP - 371

EP - 376

BT - Proceedings - 2006 IEEE International Conference on Networks, ICON 2006 - Networking-Challenges and Frontiers

ER -