Optimization of processing parameter for fabrication of polylactic acid/liquid natural rubber/graphene nanoplatelet by tensile properties

Dalila Shahdan, Sahrim Ahmad, Ruey Shan Chen, Adilah Mat Ali, Farrah Diyana Zailan

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

A study on processing parameter of polylactic acid (PLA) and graphene nanoplatelet (GNP) prepared via melt blending method using Haake Rheomix internal mixer. In this study liquid natural rubber (LNR) was used as compatibilizer and at the same time introducing ductile property into the nanocomposite blending. In order to determine the optimal processing parameter, nanocomposites were fabricated from PLA: LNR with ratio of 90:10, and 0.2 wt. % of graphene nanoplatelet with different mixing parameter condition; mixing temperature, rotor speed and mixing time. The optimal processing parameter was determined from the results of tensile testing. An optimum processing parameter of polymer nanocomposite was obtained at 180°C of mixing temperature, 100 rpm of mixing speed and 14 min of mixing time. The SEM micrographs confirmed the dispersion of GNP in the PLA matrix.

Original languageEnglish
Title of host publication2016 UKM FST Postgraduate Colloquium: Proceedings of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology 2016 Postgraduate Colloquium
PublisherAmerican Institute of Physics Inc.
Volume1784
ISBN (Electronic)9780735414464
DOIs
Publication statusPublished - 17 Nov 2016
Event2016 Postgraduate Colloquium of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology, UKM FST 2016 - Selangor, Malaysia
Duration: 13 Apr 201614 Apr 2016

Other

Other2016 Postgraduate Colloquium of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology, UKM FST 2016
CountryMalaysia
CitySelangor
Period13/4/1614/4/16

Fingerprint

tensile properties
rubber
graphene
acids
fabrication
optimization
liquids
nanocomposites
rotor speed
scanning electron microscopy
temperature
polymers
matrices

Keywords

  • Graphene
  • Liquid Natural Rubber
  • Polylactic Acid
  • Polymer Nanocomposite

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Cite this

Shahdan, D., Ahmad, S., Chen, R. S., Ali, A. M., & Zailan, F. D. (2016). Optimization of processing parameter for fabrication of polylactic acid/liquid natural rubber/graphene nanoplatelet by tensile properties. In 2016 UKM FST Postgraduate Colloquium: Proceedings of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology 2016 Postgraduate Colloquium (Vol. 1784). [040017] American Institute of Physics Inc.. https://doi.org/10.1063/1.4966803

Optimization of processing parameter for fabrication of polylactic acid/liquid natural rubber/graphene nanoplatelet by tensile properties. / Shahdan, Dalila; Ahmad, Sahrim; Chen, Ruey Shan; Ali, Adilah Mat; Zailan, Farrah Diyana.

2016 UKM FST Postgraduate Colloquium: Proceedings of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology 2016 Postgraduate Colloquium. Vol. 1784 American Institute of Physics Inc., 2016. 040017.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shahdan, D, Ahmad, S, Chen, RS, Ali, AM & Zailan, FD 2016, Optimization of processing parameter for fabrication of polylactic acid/liquid natural rubber/graphene nanoplatelet by tensile properties. in 2016 UKM FST Postgraduate Colloquium: Proceedings of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology 2016 Postgraduate Colloquium. vol. 1784, 040017, American Institute of Physics Inc., 2016 Postgraduate Colloquium of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology, UKM FST 2016, Selangor, Malaysia, 13/4/16. https://doi.org/10.1063/1.4966803
Shahdan D, Ahmad S, Chen RS, Ali AM, Zailan FD. Optimization of processing parameter for fabrication of polylactic acid/liquid natural rubber/graphene nanoplatelet by tensile properties. In 2016 UKM FST Postgraduate Colloquium: Proceedings of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology 2016 Postgraduate Colloquium. Vol. 1784. American Institute of Physics Inc. 2016. 040017 https://doi.org/10.1063/1.4966803
Shahdan, Dalila ; Ahmad, Sahrim ; Chen, Ruey Shan ; Ali, Adilah Mat ; Zailan, Farrah Diyana. / Optimization of processing parameter for fabrication of polylactic acid/liquid natural rubber/graphene nanoplatelet by tensile properties. 2016 UKM FST Postgraduate Colloquium: Proceedings of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology 2016 Postgraduate Colloquium. Vol. 1784 American Institute of Physics Inc., 2016.
@inproceedings{aabde98efa03491eaee039815fb8bb7e,
title = "Optimization of processing parameter for fabrication of polylactic acid/liquid natural rubber/graphene nanoplatelet by tensile properties",
abstract = "A study on processing parameter of polylactic acid (PLA) and graphene nanoplatelet (GNP) prepared via melt blending method using Haake Rheomix internal mixer. In this study liquid natural rubber (LNR) was used as compatibilizer and at the same time introducing ductile property into the nanocomposite blending. In order to determine the optimal processing parameter, nanocomposites were fabricated from PLA: LNR with ratio of 90:10, and 0.2 wt. {\%} of graphene nanoplatelet with different mixing parameter condition; mixing temperature, rotor speed and mixing time. The optimal processing parameter was determined from the results of tensile testing. An optimum processing parameter of polymer nanocomposite was obtained at 180°C of mixing temperature, 100 rpm of mixing speed and 14 min of mixing time. The SEM micrographs confirmed the dispersion of GNP in the PLA matrix.",
keywords = "Graphene, Liquid Natural Rubber, Polylactic Acid, Polymer Nanocomposite",
author = "Dalila Shahdan and Sahrim Ahmad and Chen, {Ruey Shan} and Ali, {Adilah Mat} and Zailan, {Farrah Diyana}",
year = "2016",
month = "11",
day = "17",
doi = "10.1063/1.4966803",
language = "English",
volume = "1784",
booktitle = "2016 UKM FST Postgraduate Colloquium: Proceedings of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology 2016 Postgraduate Colloquium",
publisher = "American Institute of Physics Inc.",

}

TY - GEN

T1 - Optimization of processing parameter for fabrication of polylactic acid/liquid natural rubber/graphene nanoplatelet by tensile properties

AU - Shahdan, Dalila

AU - Ahmad, Sahrim

AU - Chen, Ruey Shan

AU - Ali, Adilah Mat

AU - Zailan, Farrah Diyana

PY - 2016/11/17

Y1 - 2016/11/17

N2 - A study on processing parameter of polylactic acid (PLA) and graphene nanoplatelet (GNP) prepared via melt blending method using Haake Rheomix internal mixer. In this study liquid natural rubber (LNR) was used as compatibilizer and at the same time introducing ductile property into the nanocomposite blending. In order to determine the optimal processing parameter, nanocomposites were fabricated from PLA: LNR with ratio of 90:10, and 0.2 wt. % of graphene nanoplatelet with different mixing parameter condition; mixing temperature, rotor speed and mixing time. The optimal processing parameter was determined from the results of tensile testing. An optimum processing parameter of polymer nanocomposite was obtained at 180°C of mixing temperature, 100 rpm of mixing speed and 14 min of mixing time. The SEM micrographs confirmed the dispersion of GNP in the PLA matrix.

AB - A study on processing parameter of polylactic acid (PLA) and graphene nanoplatelet (GNP) prepared via melt blending method using Haake Rheomix internal mixer. In this study liquid natural rubber (LNR) was used as compatibilizer and at the same time introducing ductile property into the nanocomposite blending. In order to determine the optimal processing parameter, nanocomposites were fabricated from PLA: LNR with ratio of 90:10, and 0.2 wt. % of graphene nanoplatelet with different mixing parameter condition; mixing temperature, rotor speed and mixing time. The optimal processing parameter was determined from the results of tensile testing. An optimum processing parameter of polymer nanocomposite was obtained at 180°C of mixing temperature, 100 rpm of mixing speed and 14 min of mixing time. The SEM micrographs confirmed the dispersion of GNP in the PLA matrix.

KW - Graphene

KW - Liquid Natural Rubber

KW - Polylactic Acid

KW - Polymer Nanocomposite

UR - http://www.scopus.com/inward/record.url?scp=85014697071&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85014697071&partnerID=8YFLogxK

U2 - 10.1063/1.4966803

DO - 10.1063/1.4966803

M3 - Conference contribution

VL - 1784

BT - 2016 UKM FST Postgraduate Colloquium: Proceedings of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology 2016 Postgraduate Colloquium

PB - American Institute of Physics Inc.

ER -