Optical cross add and drop multiplexer: An analytical approach

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

OXADMs increase the capacity, flexibility, reliability and also survivability of the trunk-line optical network used for data communication. This paper describes the analytical modeling of OXADMs and studies their performance as compared to conventional OXC devices. With two restoration schemes, the OXADM prototype system focuses on providing survivability through restoration against failures by means of linear/multiplex and ring protection. Degradation is expected to be about 2 dB in output power with respect to normal conditions in ring protection activation. The test was carried out at 2.5 Gbps with BER 1x10-10 for linear protection while BER 1x10-19 (to west) and 1x10-13 (to east) were used for ring protection. The method of study involves the building and characterizing of two OXADMs, simulated by using Optisystem and modeling them analytically. Loss characterization and measured OSNR are compared against the analytical values and proven to be similar.

Original languageEnglish
Title of host publicationProceedings - 4th Advanced International Conference on Telecommunications, AICT 2008
Pages420-427
Number of pages8
DOIs
Publication statusPublished - 2008
Event4th Advanced International Conference on Telecommunications, AICT 2008 - Athens
Duration: 8 Jun 200813 Jun 2008

Other

Other4th Advanced International Conference on Telecommunications, AICT 2008
CityAthens
Period8/6/0813/6/08

Fingerprint

restoration
Restoration
Fiber optic networks
activation
flexibility
Chemical activation
Degradation
communication
Communication
performance
Values

Keywords

  • Analytical
  • OSNR
  • OXADM
  • Power penalty
  • Restoration

ASJC Scopus subject areas

  • Computer Networks and Communications
  • Electrical and Electronic Engineering
  • Communication

Cite this

Ab Rahman, M. S., Ibrahim, M. F., Abd Rahni, A. A., Shaari, S., & Jumari, K. (2008). Optical cross add and drop multiplexer: An analytical approach. In Proceedings - 4th Advanced International Conference on Telecommunications, AICT 2008 (pp. 420-427). [4545567] https://doi.org/10.1109/AICT.2008.44

Optical cross add and drop multiplexer : An analytical approach. / Ab Rahman, Mohd Syuhaimi; Ibrahim, Mohd Faisal; Abd Rahni, Ashrani Aizzuddin; Shaari, Sahbudin; Jumari, Kasmiran.

Proceedings - 4th Advanced International Conference on Telecommunications, AICT 2008. 2008. p. 420-427 4545567.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ab Rahman, MS, Ibrahim, MF, Abd Rahni, AA, Shaari, S & Jumari, K 2008, Optical cross add and drop multiplexer: An analytical approach. in Proceedings - 4th Advanced International Conference on Telecommunications, AICT 2008., 4545567, pp. 420-427, 4th Advanced International Conference on Telecommunications, AICT 2008, Athens, 8/6/08. https://doi.org/10.1109/AICT.2008.44
Ab Rahman MS, Ibrahim MF, Abd Rahni AA, Shaari S, Jumari K. Optical cross add and drop multiplexer: An analytical approach. In Proceedings - 4th Advanced International Conference on Telecommunications, AICT 2008. 2008. p. 420-427. 4545567 https://doi.org/10.1109/AICT.2008.44
Ab Rahman, Mohd Syuhaimi ; Ibrahim, Mohd Faisal ; Abd Rahni, Ashrani Aizzuddin ; Shaari, Sahbudin ; Jumari, Kasmiran. / Optical cross add and drop multiplexer : An analytical approach. Proceedings - 4th Advanced International Conference on Telecommunications, AICT 2008. 2008. pp. 420-427
@inproceedings{4ba1681525304229ae6b75d124ac130e,
title = "Optical cross add and drop multiplexer: An analytical approach",
abstract = "OXADMs increase the capacity, flexibility, reliability and also survivability of the trunk-line optical network used for data communication. This paper describes the analytical modeling of OXADMs and studies their performance as compared to conventional OXC devices. With two restoration schemes, the OXADM prototype system focuses on providing survivability through restoration against failures by means of linear/multiplex and ring protection. Degradation is expected to be about 2 dB in output power with respect to normal conditions in ring protection activation. The test was carried out at 2.5 Gbps with BER 1x10-10 for linear protection while BER 1x10-19 (to west) and 1x10-13 (to east) were used for ring protection. The method of study involves the building and characterizing of two OXADMs, simulated by using Optisystem and modeling them analytically. Loss characterization and measured OSNR are compared against the analytical values and proven to be similar.",
keywords = "Analytical, OSNR, OXADM, Power penalty, Restoration",
author = "{Ab Rahman}, {Mohd Syuhaimi} and Ibrahim, {Mohd Faisal} and {Abd Rahni}, {Ashrani Aizzuddin} and Sahbudin Shaari and Kasmiran Jumari",
year = "2008",
doi = "10.1109/AICT.2008.44",
language = "English",
isbn = "9780769531625",
pages = "420--427",
booktitle = "Proceedings - 4th Advanced International Conference on Telecommunications, AICT 2008",

}

TY - GEN

T1 - Optical cross add and drop multiplexer

T2 - An analytical approach

AU - Ab Rahman, Mohd Syuhaimi

AU - Ibrahim, Mohd Faisal

AU - Abd Rahni, Ashrani Aizzuddin

AU - Shaari, Sahbudin

AU - Jumari, Kasmiran

PY - 2008

Y1 - 2008

N2 - OXADMs increase the capacity, flexibility, reliability and also survivability of the trunk-line optical network used for data communication. This paper describes the analytical modeling of OXADMs and studies their performance as compared to conventional OXC devices. With two restoration schemes, the OXADM prototype system focuses on providing survivability through restoration against failures by means of linear/multiplex and ring protection. Degradation is expected to be about 2 dB in output power with respect to normal conditions in ring protection activation. The test was carried out at 2.5 Gbps with BER 1x10-10 for linear protection while BER 1x10-19 (to west) and 1x10-13 (to east) were used for ring protection. The method of study involves the building and characterizing of two OXADMs, simulated by using Optisystem and modeling them analytically. Loss characterization and measured OSNR are compared against the analytical values and proven to be similar.

AB - OXADMs increase the capacity, flexibility, reliability and also survivability of the trunk-line optical network used for data communication. This paper describes the analytical modeling of OXADMs and studies their performance as compared to conventional OXC devices. With two restoration schemes, the OXADM prototype system focuses on providing survivability through restoration against failures by means of linear/multiplex and ring protection. Degradation is expected to be about 2 dB in output power with respect to normal conditions in ring protection activation. The test was carried out at 2.5 Gbps with BER 1x10-10 for linear protection while BER 1x10-19 (to west) and 1x10-13 (to east) were used for ring protection. The method of study involves the building and characterizing of two OXADMs, simulated by using Optisystem and modeling them analytically. Loss characterization and measured OSNR are compared against the analytical values and proven to be similar.

KW - Analytical

KW - OSNR

KW - OXADM

KW - Power penalty

KW - Restoration

UR - http://www.scopus.com/inward/record.url?scp=50949129387&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=50949129387&partnerID=8YFLogxK

U2 - 10.1109/AICT.2008.44

DO - 10.1109/AICT.2008.44

M3 - Conference contribution

AN - SCOPUS:50949129387

SN - 9780769531625

SP - 420

EP - 427

BT - Proceedings - 4th Advanced International Conference on Telecommunications, AICT 2008

ER -