Online tool wear monitoring using portable digital assistant (PDA)

Jaharah A Ghani, Muhammad Rizal, Ahmad Sayuti, Mohd. Zaki Nuawi, Rizauddin Ramli, Baba Md Deros, Che Hassan Che Haron

Research output: Contribution to journalArticle

6 Citations (Scopus)

Abstract

Real-time tool wear monitoring is an important technique need to be developed to fulfill the demand from the fast development in machining industry. This paper proposed a new method of online tool wear monitoring using portable digital assistant (PDA)-based device to monitor progression of flank wear land during turning process by on-line detecting and analyzing the machining force signals. The machining tests were carried out on turning machine, and Kistler 9255B dynamometer was used to measure the cutting force signal, which was amplified and displayed in the DasyLab software. The measured cutting force signals stored in Dasylab was then analyzed using I-kaz 3D. The analysis was successfully done using newly developed program, C++ language and Visual Basic embedded to display the result on the PDA. This new developed program was installed on PDA to monitor the tool flank wear progression by three modes of different color which include: green (good condition), yellow (transition zone) and red (end of cutting). Therefore, it gives early warning related to the damage and failure of cutting tool, consequently helps the operation of machine to be smoothly operated in order to produce an acceptable quality in manufacturing process.

Original languageEnglish
Pages (from-to)3952-3957
Number of pages6
JournalInternational Journal of Physical Sciences
Volume6
Issue number16
Publication statusPublished - 18 Aug 2011

Fingerprint

Wear of materials
machining
Machining
Monitoring
progressions
dynamometers
warning
Dynamometers
Cutting tools
manufacturing
industries
damage
Color
computer programs
color
Industry

Keywords

  • Cutting force signal
  • I-kaz 3D
  • Portable digital assistant (PDA)
  • Real time monitoring
  • Tool flank wear

ASJC Scopus subject areas

  • Physics and Astronomy(all)
  • Electronic, Optical and Magnetic Materials

Cite this

Online tool wear monitoring using portable digital assistant (PDA). / A Ghani, Jaharah; Rizal, Muhammad; Sayuti, Ahmad; Nuawi, Mohd. Zaki; Ramli, Rizauddin; Md Deros, Baba; Che Haron, Che Hassan.

In: International Journal of Physical Sciences, Vol. 6, No. 16, 18.08.2011, p. 3952-3957.

Research output: Contribution to journalArticle

@article{459b328d909f426c9dd90afd5ab28874,
title = "Online tool wear monitoring using portable digital assistant (PDA)",
abstract = "Real-time tool wear monitoring is an important technique need to be developed to fulfill the demand from the fast development in machining industry. This paper proposed a new method of online tool wear monitoring using portable digital assistant (PDA)-based device to monitor progression of flank wear land during turning process by on-line detecting and analyzing the machining force signals. The machining tests were carried out on turning machine, and Kistler 9255B dynamometer was used to measure the cutting force signal, which was amplified and displayed in the DasyLab software. The measured cutting force signals stored in Dasylab was then analyzed using I-kaz 3D. The analysis was successfully done using newly developed program, C++ language and Visual Basic embedded to display the result on the PDA. This new developed program was installed on PDA to monitor the tool flank wear progression by three modes of different color which include: green (good condition), yellow (transition zone) and red (end of cutting). Therefore, it gives early warning related to the damage and failure of cutting tool, consequently helps the operation of machine to be smoothly operated in order to produce an acceptable quality in manufacturing process.",
keywords = "Cutting force signal, I-kaz 3D, Portable digital assistant (PDA), Real time monitoring, Tool flank wear",
author = "{A Ghani}, Jaharah and Muhammad Rizal and Ahmad Sayuti and Nuawi, {Mohd. Zaki} and Rizauddin Ramli and {Md Deros}, Baba and {Che Haron}, {Che Hassan}",
year = "2011",
month = "8",
day = "18",
language = "English",
volume = "6",
pages = "3952--3957",
journal = "International Journal of Physical Sciences",
issn = "1992-1950",
publisher = "Academic Journals",
number = "16",

}

TY - JOUR

T1 - Online tool wear monitoring using portable digital assistant (PDA)

AU - A Ghani, Jaharah

AU - Rizal, Muhammad

AU - Sayuti, Ahmad

AU - Nuawi, Mohd. Zaki

AU - Ramli, Rizauddin

AU - Md Deros, Baba

AU - Che Haron, Che Hassan

PY - 2011/8/18

Y1 - 2011/8/18

N2 - Real-time tool wear monitoring is an important technique need to be developed to fulfill the demand from the fast development in machining industry. This paper proposed a new method of online tool wear monitoring using portable digital assistant (PDA)-based device to monitor progression of flank wear land during turning process by on-line detecting and analyzing the machining force signals. The machining tests were carried out on turning machine, and Kistler 9255B dynamometer was used to measure the cutting force signal, which was amplified and displayed in the DasyLab software. The measured cutting force signals stored in Dasylab was then analyzed using I-kaz 3D. The analysis was successfully done using newly developed program, C++ language and Visual Basic embedded to display the result on the PDA. This new developed program was installed on PDA to monitor the tool flank wear progression by three modes of different color which include: green (good condition), yellow (transition zone) and red (end of cutting). Therefore, it gives early warning related to the damage and failure of cutting tool, consequently helps the operation of machine to be smoothly operated in order to produce an acceptable quality in manufacturing process.

AB - Real-time tool wear monitoring is an important technique need to be developed to fulfill the demand from the fast development in machining industry. This paper proposed a new method of online tool wear monitoring using portable digital assistant (PDA)-based device to monitor progression of flank wear land during turning process by on-line detecting and analyzing the machining force signals. The machining tests were carried out on turning machine, and Kistler 9255B dynamometer was used to measure the cutting force signal, which was amplified and displayed in the DasyLab software. The measured cutting force signals stored in Dasylab was then analyzed using I-kaz 3D. The analysis was successfully done using newly developed program, C++ language and Visual Basic embedded to display the result on the PDA. This new developed program was installed on PDA to monitor the tool flank wear progression by three modes of different color which include: green (good condition), yellow (transition zone) and red (end of cutting). Therefore, it gives early warning related to the damage and failure of cutting tool, consequently helps the operation of machine to be smoothly operated in order to produce an acceptable quality in manufacturing process.

KW - Cutting force signal

KW - I-kaz 3D

KW - Portable digital assistant (PDA)

KW - Real time monitoring

KW - Tool flank wear

UR - http://www.scopus.com/inward/record.url?scp=80052656892&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=80052656892&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:80052656892

VL - 6

SP - 3952

EP - 3957

JO - International Journal of Physical Sciences

JF - International Journal of Physical Sciences

SN - 1992-1950

IS - 16

ER -