New model for teaching and learning traditional craft courseware

Analysis and design phase

Salyani Osman, Nor Azan Mat Zin, Noraidah Sahari @ Ashaari, Yuhanis Omar, Ratna Zuarni Ramli, Norazimah Awang

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

This research seeks to look into a design process of the development of a model for teaching and learning traditional craft courseware called CDTC model. Specifically, this research focuses on analysis and design phase. The model was developed according to an established methodology and it is relied upon a conceptual framework consisting of four development phases starting from Analysis, Design, Development and Evaluation. The research begins with the preliminary analysis to look into the problems in conventional traditional apprenticeship method for teaching and learning traditional craft by looking at students and craft instructors' perceptions. Various weaknesses were identified in acquiring the craft skills taught to students especially when instructors need to teach a group of students. The results of analysis helps to suggest and determine a practical way to map out the suitable teaching environment and strategy that would best serve for teaching and learning traditional craft. As a result from initial analysis, the proposed CDTC model for educational courseware development for teaching and learning traditional craft was developed consisting of two main components. In Design phase, the proposed CDTC model's components was evaluated by selected craft instructors through initial validation process in order to verify its' components. The results from initial validation among instructors help in establishing and designing a preliminary version of the model.

Original languageEnglish
Pages (from-to)27-36
Number of pages10
JournalJournal of Theoretical and Applied Information Technology
Volume40
Issue number1
Publication statusPublished - 2012

Fingerprint

Teaching
Students
Model
Component Model
Learning
Design
Design Process
Verify
Methodology
Evaluation

Keywords

  • Craft Education
  • Model development
  • Traditional craft courseware
  • Web-based learning

ASJC Scopus subject areas

  • Computer Science(all)
  • Theoretical Computer Science

Cite this

New model for teaching and learning traditional craft courseware : Analysis and design phase. / Osman, Salyani; Mat Zin, Nor Azan; Sahari @ Ashaari, Noraidah; Omar, Yuhanis; Ramli, Ratna Zuarni; Awang, Norazimah.

In: Journal of Theoretical and Applied Information Technology, Vol. 40, No. 1, 2012, p. 27-36.

Research output: Contribution to journalArticle

@article{f1af0d244f0f4a5e8c002698c73a3dba,
title = "New model for teaching and learning traditional craft courseware: Analysis and design phase",
abstract = "This research seeks to look into a design process of the development of a model for teaching and learning traditional craft courseware called CDTC model. Specifically, this research focuses on analysis and design phase. The model was developed according to an established methodology and it is relied upon a conceptual framework consisting of four development phases starting from Analysis, Design, Development and Evaluation. The research begins with the preliminary analysis to look into the problems in conventional traditional apprenticeship method for teaching and learning traditional craft by looking at students and craft instructors' perceptions. Various weaknesses were identified in acquiring the craft skills taught to students especially when instructors need to teach a group of students. The results of analysis helps to suggest and determine a practical way to map out the suitable teaching environment and strategy that would best serve for teaching and learning traditional craft. As a result from initial analysis, the proposed CDTC model for educational courseware development for teaching and learning traditional craft was developed consisting of two main components. In Design phase, the proposed CDTC model's components was evaluated by selected craft instructors through initial validation process in order to verify its' components. The results from initial validation among instructors help in establishing and designing a preliminary version of the model.",
keywords = "Craft Education, Model development, Traditional craft courseware, Web-based learning",
author = "Salyani Osman and {Mat Zin}, {Nor Azan} and {Sahari @ Ashaari}, Noraidah and Yuhanis Omar and Ramli, {Ratna Zuarni} and Norazimah Awang",
year = "2012",
language = "English",
volume = "40",
pages = "27--36",
journal = "Journal of Theoretical and Applied Information Technology",
issn = "1992-8645",
publisher = "Asian Research Publishing Network (ARPN)",
number = "1",

}

TY - JOUR

T1 - New model for teaching and learning traditional craft courseware

T2 - Analysis and design phase

AU - Osman, Salyani

AU - Mat Zin, Nor Azan

AU - Sahari @ Ashaari, Noraidah

AU - Omar, Yuhanis

AU - Ramli, Ratna Zuarni

AU - Awang, Norazimah

PY - 2012

Y1 - 2012

N2 - This research seeks to look into a design process of the development of a model for teaching and learning traditional craft courseware called CDTC model. Specifically, this research focuses on analysis and design phase. The model was developed according to an established methodology and it is relied upon a conceptual framework consisting of four development phases starting from Analysis, Design, Development and Evaluation. The research begins with the preliminary analysis to look into the problems in conventional traditional apprenticeship method for teaching and learning traditional craft by looking at students and craft instructors' perceptions. Various weaknesses were identified in acquiring the craft skills taught to students especially when instructors need to teach a group of students. The results of analysis helps to suggest and determine a practical way to map out the suitable teaching environment and strategy that would best serve for teaching and learning traditional craft. As a result from initial analysis, the proposed CDTC model for educational courseware development for teaching and learning traditional craft was developed consisting of two main components. In Design phase, the proposed CDTC model's components was evaluated by selected craft instructors through initial validation process in order to verify its' components. The results from initial validation among instructors help in establishing and designing a preliminary version of the model.

AB - This research seeks to look into a design process of the development of a model for teaching and learning traditional craft courseware called CDTC model. Specifically, this research focuses on analysis and design phase. The model was developed according to an established methodology and it is relied upon a conceptual framework consisting of four development phases starting from Analysis, Design, Development and Evaluation. The research begins with the preliminary analysis to look into the problems in conventional traditional apprenticeship method for teaching and learning traditional craft by looking at students and craft instructors' perceptions. Various weaknesses were identified in acquiring the craft skills taught to students especially when instructors need to teach a group of students. The results of analysis helps to suggest and determine a practical way to map out the suitable teaching environment and strategy that would best serve for teaching and learning traditional craft. As a result from initial analysis, the proposed CDTC model for educational courseware development for teaching and learning traditional craft was developed consisting of two main components. In Design phase, the proposed CDTC model's components was evaluated by selected craft instructors through initial validation process in order to verify its' components. The results from initial validation among instructors help in establishing and designing a preliminary version of the model.

KW - Craft Education

KW - Model development

KW - Traditional craft courseware

KW - Web-based learning

UR - http://www.scopus.com/inward/record.url?scp=84862836207&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84862836207&partnerID=8YFLogxK

M3 - Article

VL - 40

SP - 27

EP - 36

JO - Journal of Theoretical and Applied Information Technology

JF - Journal of Theoretical and Applied Information Technology

SN - 1992-8645

IS - 1

ER -