Wieloparametryczna optymalizacja projektowania aktywnych filtrów mocy - Porównanie metod

Translated title of the contribution: Multi-objective optimization based approaches for active power filter design - A comparison

Hamid Reza Imani, Azah Mohamed, Hussain Shareef, Mahdiyeh Eslami

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

This paper introduces an optimal active power filter design method to compensate simultaneously current harmonics and reactive power of a nonlinear load. The power filter consists of a passive RL low-pass filter placed in series with the load and a pure active filter which has RL elements connected in series with insulated gate bipolar transistors (IGBT) based voltage source converter. The filter is supposed to inject a current into the connection node of the load and grid in order to eliminate current harmonics and its imaginary current. The voltage source converter is placed in a hysteresis feedback control loop to generate the reference current. The band width and output amplitude of the hysteresis controller are optimized with inductance of RL filters. In solving the optimization problem, three objective functions are considered which include minimizing current total harmonic distortion (THD), maximizing power factor and minimizing the IGBT bridge current. The four optimization methods applied are the goal attainment, max ordering, non-dominated sorting genetic algorithm-II and strength Pareto evolutionary algorithm 2 (SPEA2) methods. The results of the four optimization methods are compared and it is shown that the SPEA2 method gives the best performance in terms of minimizing current THD and maximizing the power factor.

Original languageUndefined/Unknown
Pages (from-to)98-103
Number of pages6
JournalPrzeglad Elektrotechniczny
Volume89
Issue number6
Publication statusPublished - 2013

Fingerprint

Multiobjective optimization
Insulated gate bipolar transistors (IGBT)
Harmonic distortion
Evolutionary algorithms
Hysteresis
Passive filters
Wave filters
Active filters
Low pass filters
Electric potential
Reactive power
Sorting
Inductance
Feedback control
Genetic algorithms
Bandwidth
Controllers

Keywords

  • Active Power Filter
  • Goal Attainment
  • Max Ordering
  • Multi-Objective Optimization
  • NSGA-II
  • Power Factor Correction

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Cite this

Imani, H. R., Mohamed, A., Shareef, H., & Eslami, M. (2013). Wieloparametryczna optymalizacja projektowania aktywnych filtrów mocy - Porównanie metod. Przeglad Elektrotechniczny, 89(6), 98-103.

Wieloparametryczna optymalizacja projektowania aktywnych filtrów mocy - Porównanie metod. / Imani, Hamid Reza; Mohamed, Azah; Shareef, Hussain; Eslami, Mahdiyeh.

In: Przeglad Elektrotechniczny, Vol. 89, No. 6, 2013, p. 98-103.

Research output: Contribution to journalArticle

Imani, HR, Mohamed, A, Shareef, H & Eslami, M 2013, 'Wieloparametryczna optymalizacja projektowania aktywnych filtrów mocy - Porównanie metod', Przeglad Elektrotechniczny, vol. 89, no. 6, pp. 98-103.
Imani, Hamid Reza ; Mohamed, Azah ; Shareef, Hussain ; Eslami, Mahdiyeh. / Wieloparametryczna optymalizacja projektowania aktywnych filtrów mocy - Porównanie metod. In: Przeglad Elektrotechniczny. 2013 ; Vol. 89, No. 6. pp. 98-103.
@article{5e388737349d42bd89b30dc87fe98bff,
title = "Wieloparametryczna optymalizacja projektowania aktywnych filtr{\'o}w mocy - Por{\'o}wnanie metod",
abstract = "This paper introduces an optimal active power filter design method to compensate simultaneously current harmonics and reactive power of a nonlinear load. The power filter consists of a passive RL low-pass filter placed in series with the load and a pure active filter which has RL elements connected in series with insulated gate bipolar transistors (IGBT) based voltage source converter. The filter is supposed to inject a current into the connection node of the load and grid in order to eliminate current harmonics and its imaginary current. The voltage source converter is placed in a hysteresis feedback control loop to generate the reference current. The band width and output amplitude of the hysteresis controller are optimized with inductance of RL filters. In solving the optimization problem, three objective functions are considered which include minimizing current total harmonic distortion (THD), maximizing power factor and minimizing the IGBT bridge current. The four optimization methods applied are the goal attainment, max ordering, non-dominated sorting genetic algorithm-II and strength Pareto evolutionary algorithm 2 (SPEA2) methods. The results of the four optimization methods are compared and it is shown that the SPEA2 method gives the best performance in terms of minimizing current THD and maximizing the power factor.",
keywords = "Active Power Filter, Goal Attainment, Max Ordering, Multi-Objective Optimization, NSGA-II, Power Factor Correction",
author = "Imani, {Hamid Reza} and Azah Mohamed and Hussain Shareef and Mahdiyeh Eslami",
year = "2013",
language = "Undefined/Unknown",
volume = "89",
pages = "98--103",
journal = "Przeglad Elektrotechniczny",
issn = "0033-2097",
publisher = "Wydawnictwo SIGMA - N O T Sp. z o.o.",
number = "6",

}

TY - JOUR

T1 - Wieloparametryczna optymalizacja projektowania aktywnych filtrów mocy - Porównanie metod

AU - Imani, Hamid Reza

AU - Mohamed, Azah

AU - Shareef, Hussain

AU - Eslami, Mahdiyeh

PY - 2013

Y1 - 2013

N2 - This paper introduces an optimal active power filter design method to compensate simultaneously current harmonics and reactive power of a nonlinear load. The power filter consists of a passive RL low-pass filter placed in series with the load and a pure active filter which has RL elements connected in series with insulated gate bipolar transistors (IGBT) based voltage source converter. The filter is supposed to inject a current into the connection node of the load and grid in order to eliminate current harmonics and its imaginary current. The voltage source converter is placed in a hysteresis feedback control loop to generate the reference current. The band width and output amplitude of the hysteresis controller are optimized with inductance of RL filters. In solving the optimization problem, three objective functions are considered which include minimizing current total harmonic distortion (THD), maximizing power factor and minimizing the IGBT bridge current. The four optimization methods applied are the goal attainment, max ordering, non-dominated sorting genetic algorithm-II and strength Pareto evolutionary algorithm 2 (SPEA2) methods. The results of the four optimization methods are compared and it is shown that the SPEA2 method gives the best performance in terms of minimizing current THD and maximizing the power factor.

AB - This paper introduces an optimal active power filter design method to compensate simultaneously current harmonics and reactive power of a nonlinear load. The power filter consists of a passive RL low-pass filter placed in series with the load and a pure active filter which has RL elements connected in series with insulated gate bipolar transistors (IGBT) based voltage source converter. The filter is supposed to inject a current into the connection node of the load and grid in order to eliminate current harmonics and its imaginary current. The voltage source converter is placed in a hysteresis feedback control loop to generate the reference current. The band width and output amplitude of the hysteresis controller are optimized with inductance of RL filters. In solving the optimization problem, three objective functions are considered which include minimizing current total harmonic distortion (THD), maximizing power factor and minimizing the IGBT bridge current. The four optimization methods applied are the goal attainment, max ordering, non-dominated sorting genetic algorithm-II and strength Pareto evolutionary algorithm 2 (SPEA2) methods. The results of the four optimization methods are compared and it is shown that the SPEA2 method gives the best performance in terms of minimizing current THD and maximizing the power factor.

KW - Active Power Filter

KW - Goal Attainment

KW - Max Ordering

KW - Multi-Objective Optimization

KW - NSGA-II

KW - Power Factor Correction

UR - http://www.scopus.com/inward/record.url?scp=84878785632&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84878785632&partnerID=8YFLogxK

M3 - Article

VL - 89

SP - 98

EP - 103

JO - Przeglad Elektrotechniczny

JF - Przeglad Elektrotechniczny

SN - 0033-2097

IS - 6

ER -