Modelling in Manufacturing Industry: Parameters Selection Using Regression Analysis

Abdul Talib Bon, Jean Marc Ogier, Ahmad Mahir Razali

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The manufacturing industries are forced to meet the demand of the end users in many different aspects especially to reduce the number of defects. Since then, the manufacturers have adopted many strategies in order to achieve zero defect end products. Therefore, this research is an early attempt to present a proper method for manufacturers to achieve their goal starting from parameters selection and then optimization to control the belt line moulding production process. We apply regression analysis to make parameters selection and then used the best variables selected to optimize or in this case to minimize defects in belt line moulding process. The findings from this study will serve as a useful evidence and applicability of the proposed methodology.

Original languageEnglish
Title of host publicationProceedings - 1st Asia International Conference on Modelling and Simulation: Asia Modelling Symposium 2007, AMS 2007
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages521-526
Number of pages6
ISBN (Print)0769528457, 9780769528458
DOIs
Publication statusPublished - 2007
Externally publishedYes
Event1st Asia International Conference on Modelling and Simulation - Asia Modelling Symposium 2007, AMS 2007 - Phuket, Thailand
Duration: 27 Mar 200730 Mar 2007

Other

Other1st Asia International Conference on Modelling and Simulation - Asia Modelling Symposium 2007, AMS 2007
CountryThailand
CityPhuket
Period27/3/0730/3/07

Fingerprint

Manufacturing Industries
Parameter Selection
Regression Analysis
Regression analysis
Molding
Defects
Modeling
Industry
Line
Optimise
Minimise
Optimization
Methodology
Zero

ASJC Scopus subject areas

  • Modelling and Simulation

Cite this

Bon, A. T., Ogier, J. M., & Razali, A. M. (2007). Modelling in Manufacturing Industry: Parameters Selection Using Regression Analysis. In Proceedings - 1st Asia International Conference on Modelling and Simulation: Asia Modelling Symposium 2007, AMS 2007 (pp. 521-526). [4148714] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/AMS.2007.65

Modelling in Manufacturing Industry : Parameters Selection Using Regression Analysis. / Bon, Abdul Talib; Ogier, Jean Marc; Razali, Ahmad Mahir.

Proceedings - 1st Asia International Conference on Modelling and Simulation: Asia Modelling Symposium 2007, AMS 2007. Institute of Electrical and Electronics Engineers Inc., 2007. p. 521-526 4148714.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bon, AT, Ogier, JM & Razali, AM 2007, Modelling in Manufacturing Industry: Parameters Selection Using Regression Analysis. in Proceedings - 1st Asia International Conference on Modelling and Simulation: Asia Modelling Symposium 2007, AMS 2007., 4148714, Institute of Electrical and Electronics Engineers Inc., pp. 521-526, 1st Asia International Conference on Modelling and Simulation - Asia Modelling Symposium 2007, AMS 2007, Phuket, Thailand, 27/3/07. https://doi.org/10.1109/AMS.2007.65
Bon AT, Ogier JM, Razali AM. Modelling in Manufacturing Industry: Parameters Selection Using Regression Analysis. In Proceedings - 1st Asia International Conference on Modelling and Simulation: Asia Modelling Symposium 2007, AMS 2007. Institute of Electrical and Electronics Engineers Inc. 2007. p. 521-526. 4148714 https://doi.org/10.1109/AMS.2007.65
Bon, Abdul Talib ; Ogier, Jean Marc ; Razali, Ahmad Mahir. / Modelling in Manufacturing Industry : Parameters Selection Using Regression Analysis. Proceedings - 1st Asia International Conference on Modelling and Simulation: Asia Modelling Symposium 2007, AMS 2007. Institute of Electrical and Electronics Engineers Inc., 2007. pp. 521-526
@inproceedings{c1f73817cacd43a0b1279e6954d14164,
title = "Modelling in Manufacturing Industry: Parameters Selection Using Regression Analysis",
abstract = "The manufacturing industries are forced to meet the demand of the end users in many different aspects especially to reduce the number of defects. Since then, the manufacturers have adopted many strategies in order to achieve zero defect end products. Therefore, this research is an early attempt to present a proper method for manufacturers to achieve their goal starting from parameters selection and then optimization to control the belt line moulding production process. We apply regression analysis to make parameters selection and then used the best variables selected to optimize or in this case to minimize defects in belt line moulding process. The findings from this study will serve as a useful evidence and applicability of the proposed methodology.",
author = "Bon, {Abdul Talib} and Ogier, {Jean Marc} and Razali, {Ahmad Mahir}",
year = "2007",
doi = "10.1109/AMS.2007.65",
language = "English",
isbn = "0769528457",
pages = "521--526",
booktitle = "Proceedings - 1st Asia International Conference on Modelling and Simulation: Asia Modelling Symposium 2007, AMS 2007",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - GEN

T1 - Modelling in Manufacturing Industry

T2 - Parameters Selection Using Regression Analysis

AU - Bon, Abdul Talib

AU - Ogier, Jean Marc

AU - Razali, Ahmad Mahir

PY - 2007

Y1 - 2007

N2 - The manufacturing industries are forced to meet the demand of the end users in many different aspects especially to reduce the number of defects. Since then, the manufacturers have adopted many strategies in order to achieve zero defect end products. Therefore, this research is an early attempt to present a proper method for manufacturers to achieve their goal starting from parameters selection and then optimization to control the belt line moulding production process. We apply regression analysis to make parameters selection and then used the best variables selected to optimize or in this case to minimize defects in belt line moulding process. The findings from this study will serve as a useful evidence and applicability of the proposed methodology.

AB - The manufacturing industries are forced to meet the demand of the end users in many different aspects especially to reduce the number of defects. Since then, the manufacturers have adopted many strategies in order to achieve zero defect end products. Therefore, this research is an early attempt to present a proper method for manufacturers to achieve their goal starting from parameters selection and then optimization to control the belt line moulding production process. We apply regression analysis to make parameters selection and then used the best variables selected to optimize or in this case to minimize defects in belt line moulding process. The findings from this study will serve as a useful evidence and applicability of the proposed methodology.

UR - http://www.scopus.com/inward/record.url?scp=84963988877&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84963988877&partnerID=8YFLogxK

U2 - 10.1109/AMS.2007.65

DO - 10.1109/AMS.2007.65

M3 - Conference contribution

AN - SCOPUS:84963988877

SN - 0769528457

SN - 9780769528458

SP - 521

EP - 526

BT - Proceedings - 1st Asia International Conference on Modelling and Simulation: Asia Modelling Symposium 2007, AMS 2007

PB - Institute of Electrical and Electronics Engineers Inc.

ER -