Modeling and performance analysis of hybrid power system for residential application

Monaaf D A Al-Falahi, Mohd Zamri Che Wanik

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    7 Citations (Scopus)

    Abstract

    This paper describes modeling and presenting performance analysis of PV/Wind/Battery Hybrid Power System (PWB-HPS) for residential applications. The main aim is to maximize the use of Renewable Energy Sources (RES) to meet the load demand by selecting the optimal configurations of the proposed PWB-HPS. The system consists of two Photovoltaic (PV) panels inclined in two different directions, one Wind Generation System (WGS) and Battery Storage (BS) connected to a DC bus and then to the AC side through pulse width modulation inverter. Maximum Power Point Tracking (MPPT) is used to efficiently regulate the pulse width of the control signal of the boost converter in order to maintain the voltage level of the DC bus at a specific value. The system is modeled and simulated with SIMULINK software for two modes of operations: On-Grid and Off-Grid in order to examine the complementary characteristics of solar and wind power system to satisfy the load demand. Simulation results showed that the design can effectively realize the variation of RES by maintaining the voltage level of the DC bus at 240 V which satisfied the load demand at whole simulation time. The effectiveness of the proposed system was demonstrated by the simulation results and validated with detail analysis on the system's performance.

    Original languageEnglish
    Title of host publication2015 Australasian Universities Power Engineering Conference: Challenges for Future Grids, AUPEC 2015
    PublisherInstitute of Electrical and Electronics Engineers Inc.
    ISBN (Print)9781479987252
    DOIs
    Publication statusPublished - 10 Nov 2015
    Event25th Australasian Universities Power Engineering Conference, AUPEC 2015 - Wollongong, Australia
    Duration: 27 Sep 201530 Sep 2015

    Other

    Other25th Australasian Universities Power Engineering Conference, AUPEC 2015
    CountryAustralia
    CityWollongong
    Period27/9/1530/9/15

    Fingerprint

    Electric potential
    Pulse width modulation
    Solar energy
    Wind power

    Keywords

    • Battery Storage
    • Hybrid Power System
    • Photovoltaic
    • PV/Wind/Battery Hybrid Power System
    • Renewable Energy Sources
    • Wind Generation System

    ASJC Scopus subject areas

    • Energy Engineering and Power Technology
    • Electrical and Electronic Engineering

    Cite this

    Al-Falahi, M. D. A., & Wanik, M. Z. C. (2015). Modeling and performance analysis of hybrid power system for residential application. In 2015 Australasian Universities Power Engineering Conference: Challenges for Future Grids, AUPEC 2015 [7324810] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/AUPEC.2015.7324810

    Modeling and performance analysis of hybrid power system for residential application. / Al-Falahi, Monaaf D A; Wanik, Mohd Zamri Che.

    2015 Australasian Universities Power Engineering Conference: Challenges for Future Grids, AUPEC 2015. Institute of Electrical and Electronics Engineers Inc., 2015. 7324810.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Al-Falahi, MDA & Wanik, MZC 2015, Modeling and performance analysis of hybrid power system for residential application. in 2015 Australasian Universities Power Engineering Conference: Challenges for Future Grids, AUPEC 2015., 7324810, Institute of Electrical and Electronics Engineers Inc., 25th Australasian Universities Power Engineering Conference, AUPEC 2015, Wollongong, Australia, 27/9/15. https://doi.org/10.1109/AUPEC.2015.7324810
    Al-Falahi MDA, Wanik MZC. Modeling and performance analysis of hybrid power system for residential application. In 2015 Australasian Universities Power Engineering Conference: Challenges for Future Grids, AUPEC 2015. Institute of Electrical and Electronics Engineers Inc. 2015. 7324810 https://doi.org/10.1109/AUPEC.2015.7324810
    Al-Falahi, Monaaf D A ; Wanik, Mohd Zamri Che. / Modeling and performance analysis of hybrid power system for residential application. 2015 Australasian Universities Power Engineering Conference: Challenges for Future Grids, AUPEC 2015. Institute of Electrical and Electronics Engineers Inc., 2015.
    @inproceedings{e3d78710b08249b0932c7aa25fd92a36,
    title = "Modeling and performance analysis of hybrid power system for residential application",
    abstract = "This paper describes modeling and presenting performance analysis of PV/Wind/Battery Hybrid Power System (PWB-HPS) for residential applications. The main aim is to maximize the use of Renewable Energy Sources (RES) to meet the load demand by selecting the optimal configurations of the proposed PWB-HPS. The system consists of two Photovoltaic (PV) panels inclined in two different directions, one Wind Generation System (WGS) and Battery Storage (BS) connected to a DC bus and then to the AC side through pulse width modulation inverter. Maximum Power Point Tracking (MPPT) is used to efficiently regulate the pulse width of the control signal of the boost converter in order to maintain the voltage level of the DC bus at a specific value. The system is modeled and simulated with SIMULINK software for two modes of operations: On-Grid and Off-Grid in order to examine the complementary characteristics of solar and wind power system to satisfy the load demand. Simulation results showed that the design can effectively realize the variation of RES by maintaining the voltage level of the DC bus at 240 V which satisfied the load demand at whole simulation time. The effectiveness of the proposed system was demonstrated by the simulation results and validated with detail analysis on the system's performance.",
    keywords = "Battery Storage, Hybrid Power System, Photovoltaic, PV/Wind/Battery Hybrid Power System, Renewable Energy Sources, Wind Generation System",
    author = "Al-Falahi, {Monaaf D A} and Wanik, {Mohd Zamri Che}",
    year = "2015",
    month = "11",
    day = "10",
    doi = "10.1109/AUPEC.2015.7324810",
    language = "English",
    isbn = "9781479987252",
    booktitle = "2015 Australasian Universities Power Engineering Conference: Challenges for Future Grids, AUPEC 2015",
    publisher = "Institute of Electrical and Electronics Engineers Inc.",

    }

    TY - GEN

    T1 - Modeling and performance analysis of hybrid power system for residential application

    AU - Al-Falahi, Monaaf D A

    AU - Wanik, Mohd Zamri Che

    PY - 2015/11/10

    Y1 - 2015/11/10

    N2 - This paper describes modeling and presenting performance analysis of PV/Wind/Battery Hybrid Power System (PWB-HPS) for residential applications. The main aim is to maximize the use of Renewable Energy Sources (RES) to meet the load demand by selecting the optimal configurations of the proposed PWB-HPS. The system consists of two Photovoltaic (PV) panels inclined in two different directions, one Wind Generation System (WGS) and Battery Storage (BS) connected to a DC bus and then to the AC side through pulse width modulation inverter. Maximum Power Point Tracking (MPPT) is used to efficiently regulate the pulse width of the control signal of the boost converter in order to maintain the voltage level of the DC bus at a specific value. The system is modeled and simulated with SIMULINK software for two modes of operations: On-Grid and Off-Grid in order to examine the complementary characteristics of solar and wind power system to satisfy the load demand. Simulation results showed that the design can effectively realize the variation of RES by maintaining the voltage level of the DC bus at 240 V which satisfied the load demand at whole simulation time. The effectiveness of the proposed system was demonstrated by the simulation results and validated with detail analysis on the system's performance.

    AB - This paper describes modeling and presenting performance analysis of PV/Wind/Battery Hybrid Power System (PWB-HPS) for residential applications. The main aim is to maximize the use of Renewable Energy Sources (RES) to meet the load demand by selecting the optimal configurations of the proposed PWB-HPS. The system consists of two Photovoltaic (PV) panels inclined in two different directions, one Wind Generation System (WGS) and Battery Storage (BS) connected to a DC bus and then to the AC side through pulse width modulation inverter. Maximum Power Point Tracking (MPPT) is used to efficiently regulate the pulse width of the control signal of the boost converter in order to maintain the voltage level of the DC bus at a specific value. The system is modeled and simulated with SIMULINK software for two modes of operations: On-Grid and Off-Grid in order to examine the complementary characteristics of solar and wind power system to satisfy the load demand. Simulation results showed that the design can effectively realize the variation of RES by maintaining the voltage level of the DC bus at 240 V which satisfied the load demand at whole simulation time. The effectiveness of the proposed system was demonstrated by the simulation results and validated with detail analysis on the system's performance.

    KW - Battery Storage

    KW - Hybrid Power System

    KW - Photovoltaic

    KW - PV/Wind/Battery Hybrid Power System

    KW - Renewable Energy Sources

    KW - Wind Generation System

    UR - http://www.scopus.com/inward/record.url?scp=84962419500&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=84962419500&partnerID=8YFLogxK

    U2 - 10.1109/AUPEC.2015.7324810

    DO - 10.1109/AUPEC.2015.7324810

    M3 - Conference contribution

    SN - 9781479987252

    BT - 2015 Australasian Universities Power Engineering Conference: Challenges for Future Grids, AUPEC 2015

    PB - Institute of Electrical and Electronics Engineers Inc.

    ER -