Miniaturized paper based substrate microstrip antenna with slot configurations for automotive systems

W. N Zaihasra W Salleh, M. Y. Ismail, Norbahiah Misran

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

The conventional microstrip antennas for automotive systems are limited to a short range communication, high loss performance and high cost. These limitations caused the increased number of traffic congestion and collisions in automotive field. This paper proposes a miniaturized microstrip dipole antenna embedded on sustainable paper material. It is shown that the proposed microstrip antenna based on paper substrate offers the lowest return loss of -25.82dB and widest bandwidth of 460MHz as compared to Rogers RT/Duroid 5870 and FR-4. In this work, the lower slot, upper slot and both upper and lower slots have been extracted on the surface of the dipole element. For lower slot, it resonates at 7.01GHz with -21.93dB return loss and 520MHz bandwidth while upper slot is shown to have the return loss and bandwidth of -31.33dB and 410MHz respectively at 6.86GHz. For both upper and lower slots, the antenna is shown to have -34.19dB return loss and 400MHz bandwidth at 6.61GHz. Furthermore, the material characterization has been carried out to characterize the dielectric properties of substrate materials. A novel algorithm based on Finite Element Method has been developed in this work to verify the analysis from the simulated results. Moreover, the scattering parameter measurements have been performed and the results have been compared with the simulated results.

Original languageEnglish
Title of host publicationProc. of 2013 3rd Int. Conf. on Instrumentation, Communications, Information Technol., and Biomedical Engineering: Science and Technol. for Improvement of Health, Safety, and Environ., ICICI-BME 2013
PublisherIEEE Computer Society
Pages100-105
Number of pages6
ISBN (Print)9781479916504
DOIs
Publication statusPublished - 2013
Event2013 3rd International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering, ICICI-BME 2013 - Bandung
Duration: 7 Nov 20138 Nov 2013

Other

Other2013 3rd International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering, ICICI-BME 2013
CityBandung
Period7/11/138/11/13

Fingerprint

microstrip antennas
Microstrip antennas
slots
Substrates
Bandwidth
configurations
bandwidth
Dipole antennas
Traffic congestion
Scattering parameters
dipole antennas
congestion
Dielectric properties
traffic
dielectric properties
Antennas
finite element method
Finite element method
antennas
communication

Keywords

  • automotive systems
  • Finite Element Method (FEM)
  • loss and bandwidth performances
  • material characterization
  • sustainable material

ASJC Scopus subject areas

  • Computer Networks and Communications
  • Biomedical Engineering
  • Instrumentation

Cite this

Salleh, W. N. Z. W., Ismail, M. Y., & Misran, N. (2013). Miniaturized paper based substrate microstrip antenna with slot configurations for automotive systems. In Proc. of 2013 3rd Int. Conf. on Instrumentation, Communications, Information Technol., and Biomedical Engineering: Science and Technol. for Improvement of Health, Safety, and Environ., ICICI-BME 2013 (pp. 100-105). [6698473] IEEE Computer Society. https://doi.org/10.1109/ICICI-BME.2013.6698473

Miniaturized paper based substrate microstrip antenna with slot configurations for automotive systems. / Salleh, W. N Zaihasra W; Ismail, M. Y.; Misran, Norbahiah.

Proc. of 2013 3rd Int. Conf. on Instrumentation, Communications, Information Technol., and Biomedical Engineering: Science and Technol. for Improvement of Health, Safety, and Environ., ICICI-BME 2013. IEEE Computer Society, 2013. p. 100-105 6698473.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Salleh, WNZW, Ismail, MY & Misran, N 2013, Miniaturized paper based substrate microstrip antenna with slot configurations for automotive systems. in Proc. of 2013 3rd Int. Conf. on Instrumentation, Communications, Information Technol., and Biomedical Engineering: Science and Technol. for Improvement of Health, Safety, and Environ., ICICI-BME 2013., 6698473, IEEE Computer Society, pp. 100-105, 2013 3rd International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering, ICICI-BME 2013, Bandung, 7/11/13. https://doi.org/10.1109/ICICI-BME.2013.6698473
Salleh WNZW, Ismail MY, Misran N. Miniaturized paper based substrate microstrip antenna with slot configurations for automotive systems. In Proc. of 2013 3rd Int. Conf. on Instrumentation, Communications, Information Technol., and Biomedical Engineering: Science and Technol. for Improvement of Health, Safety, and Environ., ICICI-BME 2013. IEEE Computer Society. 2013. p. 100-105. 6698473 https://doi.org/10.1109/ICICI-BME.2013.6698473
Salleh, W. N Zaihasra W ; Ismail, M. Y. ; Misran, Norbahiah. / Miniaturized paper based substrate microstrip antenna with slot configurations for automotive systems. Proc. of 2013 3rd Int. Conf. on Instrumentation, Communications, Information Technol., and Biomedical Engineering: Science and Technol. for Improvement of Health, Safety, and Environ., ICICI-BME 2013. IEEE Computer Society, 2013. pp. 100-105
@inproceedings{108317fa0ae14e58ada021a7415875e4,
title = "Miniaturized paper based substrate microstrip antenna with slot configurations for automotive systems",
abstract = "The conventional microstrip antennas for automotive systems are limited to a short range communication, high loss performance and high cost. These limitations caused the increased number of traffic congestion and collisions in automotive field. This paper proposes a miniaturized microstrip dipole antenna embedded on sustainable paper material. It is shown that the proposed microstrip antenna based on paper substrate offers the lowest return loss of -25.82dB and widest bandwidth of 460MHz as compared to Rogers RT/Duroid 5870 and FR-4. In this work, the lower slot, upper slot and both upper and lower slots have been extracted on the surface of the dipole element. For lower slot, it resonates at 7.01GHz with -21.93dB return loss and 520MHz bandwidth while upper slot is shown to have the return loss and bandwidth of -31.33dB and 410MHz respectively at 6.86GHz. For both upper and lower slots, the antenna is shown to have -34.19dB return loss and 400MHz bandwidth at 6.61GHz. Furthermore, the material characterization has been carried out to characterize the dielectric properties of substrate materials. A novel algorithm based on Finite Element Method has been developed in this work to verify the analysis from the simulated results. Moreover, the scattering parameter measurements have been performed and the results have been compared with the simulated results.",
keywords = "automotive systems, Finite Element Method (FEM), loss and bandwidth performances, material characterization, sustainable material",
author = "Salleh, {W. N Zaihasra W} and Ismail, {M. Y.} and Norbahiah Misran",
year = "2013",
doi = "10.1109/ICICI-BME.2013.6698473",
language = "English",
isbn = "9781479916504",
pages = "100--105",
booktitle = "Proc. of 2013 3rd Int. Conf. on Instrumentation, Communications, Information Technol., and Biomedical Engineering: Science and Technol. for Improvement of Health, Safety, and Environ., ICICI-BME 2013",
publisher = "IEEE Computer Society",

}

TY - GEN

T1 - Miniaturized paper based substrate microstrip antenna with slot configurations for automotive systems

AU - Salleh, W. N Zaihasra W

AU - Ismail, M. Y.

AU - Misran, Norbahiah

PY - 2013

Y1 - 2013

N2 - The conventional microstrip antennas for automotive systems are limited to a short range communication, high loss performance and high cost. These limitations caused the increased number of traffic congestion and collisions in automotive field. This paper proposes a miniaturized microstrip dipole antenna embedded on sustainable paper material. It is shown that the proposed microstrip antenna based on paper substrate offers the lowest return loss of -25.82dB and widest bandwidth of 460MHz as compared to Rogers RT/Duroid 5870 and FR-4. In this work, the lower slot, upper slot and both upper and lower slots have been extracted on the surface of the dipole element. For lower slot, it resonates at 7.01GHz with -21.93dB return loss and 520MHz bandwidth while upper slot is shown to have the return loss and bandwidth of -31.33dB and 410MHz respectively at 6.86GHz. For both upper and lower slots, the antenna is shown to have -34.19dB return loss and 400MHz bandwidth at 6.61GHz. Furthermore, the material characterization has been carried out to characterize the dielectric properties of substrate materials. A novel algorithm based on Finite Element Method has been developed in this work to verify the analysis from the simulated results. Moreover, the scattering parameter measurements have been performed and the results have been compared with the simulated results.

AB - The conventional microstrip antennas for automotive systems are limited to a short range communication, high loss performance and high cost. These limitations caused the increased number of traffic congestion and collisions in automotive field. This paper proposes a miniaturized microstrip dipole antenna embedded on sustainable paper material. It is shown that the proposed microstrip antenna based on paper substrate offers the lowest return loss of -25.82dB and widest bandwidth of 460MHz as compared to Rogers RT/Duroid 5870 and FR-4. In this work, the lower slot, upper slot and both upper and lower slots have been extracted on the surface of the dipole element. For lower slot, it resonates at 7.01GHz with -21.93dB return loss and 520MHz bandwidth while upper slot is shown to have the return loss and bandwidth of -31.33dB and 410MHz respectively at 6.86GHz. For both upper and lower slots, the antenna is shown to have -34.19dB return loss and 400MHz bandwidth at 6.61GHz. Furthermore, the material characterization has been carried out to characterize the dielectric properties of substrate materials. A novel algorithm based on Finite Element Method has been developed in this work to verify the analysis from the simulated results. Moreover, the scattering parameter measurements have been performed and the results have been compared with the simulated results.

KW - automotive systems

KW - Finite Element Method (FEM)

KW - loss and bandwidth performances

KW - material characterization

KW - sustainable material

UR - http://www.scopus.com/inward/record.url?scp=84893594615&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84893594615&partnerID=8YFLogxK

U2 - 10.1109/ICICI-BME.2013.6698473

DO - 10.1109/ICICI-BME.2013.6698473

M3 - Conference contribution

SN - 9781479916504

SP - 100

EP - 105

BT - Proc. of 2013 3rd Int. Conf. on Instrumentation, Communications, Information Technol., and Biomedical Engineering: Science and Technol. for Improvement of Health, Safety, and Environ., ICICI-BME 2013

PB - IEEE Computer Society

ER -