Microstructural characterization of ZrO2 layer coating on martensitic stainless steel

Siti Hawa Mohamed Salleh, Mohd. Zaidi Omar, Mohd Nazree Derman, Salmie Suhana Che Abdullah

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

High carbon steel stainless steel such as 440C martensitic stainless steel, are commonly used for automotive components, such as ball bearings, races, gage blocks and valve. In this study, 440C steel was coated with ZrO2 by electrolytic deposition in ZrO(NO3)2 aqueous solution. After annealing, the ZrO2 coated specimens were characterized by x-ray diffraction (XRD) and scanning electron microscope (SEM). Scanning electron micrograph showed that thickness of the coated sample was approximately 0.7μm. Besides that, secondary hardening effect occurred on the annealed SS440C substrate and it might be due to the presence of secondary carbide.

Original languageEnglish
Title of host publicationApplied Mechanics and Materials
Pages88-92
Number of pages5
Volume165
DOIs
Publication statusPublished - 2012
Externally publishedYes
EventRegional Conference on Automotive Research, ReCAR 2011 - Kuala Lumpur
Duration: 14 Dec 201115 Dec 2011

Publication series

NameApplied Mechanics and Materials
Volume165
ISSN (Print)16609336
ISSN (Electronic)16627482

Other

OtherRegional Conference on Automotive Research, ReCAR 2011
CityKuala Lumpur
Period14/12/1115/12/11

Fingerprint

Martensitic stainless steel
Gage blocks
Scanning
Coatings
Ball bearings
Electrodeposition
Carbon steel
Carbides
Hardening
Electron microscopes
Stainless steel
Diffraction
Annealing
X rays
Electrons
Steel
Substrates

Keywords

  • Electrolytic coating
  • Secondary hardening
  • SS440C stainless steel

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Salleh, S. H. M., Omar, M. Z., Derman, M. N., & Abdullah, S. S. C. (2012). Microstructural characterization of ZrO2 layer coating on martensitic stainless steel. In Applied Mechanics and Materials (Vol. 165, pp. 88-92). (Applied Mechanics and Materials; Vol. 165). https://doi.org/10.4028/www.scientific.net/AMM.165.88

Microstructural characterization of ZrO2 layer coating on martensitic stainless steel. / Salleh, Siti Hawa Mohamed; Omar, Mohd. Zaidi; Derman, Mohd Nazree; Abdullah, Salmie Suhana Che.

Applied Mechanics and Materials. Vol. 165 2012. p. 88-92 (Applied Mechanics and Materials; Vol. 165).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Salleh, SHM, Omar, MZ, Derman, MN & Abdullah, SSC 2012, Microstructural characterization of ZrO2 layer coating on martensitic stainless steel. in Applied Mechanics and Materials. vol. 165, Applied Mechanics and Materials, vol. 165, pp. 88-92, Regional Conference on Automotive Research, ReCAR 2011, Kuala Lumpur, 14/12/11. https://doi.org/10.4028/www.scientific.net/AMM.165.88
Salleh SHM, Omar MZ, Derman MN, Abdullah SSC. Microstructural characterization of ZrO2 layer coating on martensitic stainless steel. In Applied Mechanics and Materials. Vol. 165. 2012. p. 88-92. (Applied Mechanics and Materials). https://doi.org/10.4028/www.scientific.net/AMM.165.88
Salleh, Siti Hawa Mohamed ; Omar, Mohd. Zaidi ; Derman, Mohd Nazree ; Abdullah, Salmie Suhana Che. / Microstructural characterization of ZrO2 layer coating on martensitic stainless steel. Applied Mechanics and Materials. Vol. 165 2012. pp. 88-92 (Applied Mechanics and Materials).
@inproceedings{e5f05a5f20994d759cb7e35308d13d36,
title = "Microstructural characterization of ZrO2 layer coating on martensitic stainless steel",
abstract = "High carbon steel stainless steel such as 440C martensitic stainless steel, are commonly used for automotive components, such as ball bearings, races, gage blocks and valve. In this study, 440C steel was coated with ZrO2 by electrolytic deposition in ZrO(NO3)2 aqueous solution. After annealing, the ZrO2 coated specimens were characterized by x-ray diffraction (XRD) and scanning electron microscope (SEM). Scanning electron micrograph showed that thickness of the coated sample was approximately 0.7μm. Besides that, secondary hardening effect occurred on the annealed SS440C substrate and it might be due to the presence of secondary carbide.",
keywords = "Electrolytic coating, Secondary hardening, SS440C stainless steel",
author = "Salleh, {Siti Hawa Mohamed} and Omar, {Mohd. Zaidi} and Derman, {Mohd Nazree} and Abdullah, {Salmie Suhana Che}",
year = "2012",
doi = "10.4028/www.scientific.net/AMM.165.88",
language = "English",
isbn = "9783037854136",
volume = "165",
series = "Applied Mechanics and Materials",
pages = "88--92",
booktitle = "Applied Mechanics and Materials",

}

TY - GEN

T1 - Microstructural characterization of ZrO2 layer coating on martensitic stainless steel

AU - Salleh, Siti Hawa Mohamed

AU - Omar, Mohd. Zaidi

AU - Derman, Mohd Nazree

AU - Abdullah, Salmie Suhana Che

PY - 2012

Y1 - 2012

N2 - High carbon steel stainless steel such as 440C martensitic stainless steel, are commonly used for automotive components, such as ball bearings, races, gage blocks and valve. In this study, 440C steel was coated with ZrO2 by electrolytic deposition in ZrO(NO3)2 aqueous solution. After annealing, the ZrO2 coated specimens were characterized by x-ray diffraction (XRD) and scanning electron microscope (SEM). Scanning electron micrograph showed that thickness of the coated sample was approximately 0.7μm. Besides that, secondary hardening effect occurred on the annealed SS440C substrate and it might be due to the presence of secondary carbide.

AB - High carbon steel stainless steel such as 440C martensitic stainless steel, are commonly used for automotive components, such as ball bearings, races, gage blocks and valve. In this study, 440C steel was coated with ZrO2 by electrolytic deposition in ZrO(NO3)2 aqueous solution. After annealing, the ZrO2 coated specimens were characterized by x-ray diffraction (XRD) and scanning electron microscope (SEM). Scanning electron micrograph showed that thickness of the coated sample was approximately 0.7μm. Besides that, secondary hardening effect occurred on the annealed SS440C substrate and it might be due to the presence of secondary carbide.

KW - Electrolytic coating

KW - Secondary hardening

KW - SS440C stainless steel

UR - http://www.scopus.com/inward/record.url?scp=84860815003&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84860815003&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMM.165.88

DO - 10.4028/www.scientific.net/AMM.165.88

M3 - Conference contribution

AN - SCOPUS:84860815003

SN - 9783037854136

VL - 165

T3 - Applied Mechanics and Materials

SP - 88

EP - 92

BT - Applied Mechanics and Materials

ER -