Kajian Sifat Mekanik Nanokomposit Epoksi Berpenguat Gentian Hibrid Nanotiub Karbon dan Nanozarah Tanah Liat

Translated title of the contribution: Mechanical properties study of epoxy nanocomposite reinforced hybrid fibre carbon nanotubes and nano clay

Mohd Hafizuddin Ab Ghani, Mohd Nazry Salleh, Ruey Shan Chen, Sahrim Ahmad, Ismail Hanafi, Nishata Royan Rajendran Royan, Mohd Nazri Idris

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

The study was performed to investigate the mechanical properties of epoxy nanocomposite reinforced hybrid fibre multi-wall carbon nanotubes (MWCNT) and nanoclay (NC). Nanocomposite hybrid nanoparticles were prepared by using mechanical stirrer and compression molding. From the flexural test measurements, the hybrid specimens gave higher strength than those of the other samples. The impact testing showed that the addition of nanoparticles to the sample cannot increase the samples properties. Scanning electron micrograph (SEM) shows better dispersion of hybrid filler in the matrix, that proves hybrid carbon nanotubes and nanoclay on certain amount of ratios can improve the mechanical properties of nanocomposite materials.

Original languageMalay
Pages (from-to)1259-1263
Number of pages5
JournalSains Malaysiana
Volume45
Issue number8
Publication statusPublished - 1 Aug 2016

Fingerprint

Carbon Nanotubes
Nanocomposites
Mechanical properties
Fibers
Nanoparticles
Impact testing
Compression molding
Fillers
Scanning
Electrons
clay

ASJC Scopus subject areas

  • General

Cite this

Ghani, M. H. A., Salleh, M. N., Chen, R. S., Ahmad, S., Hanafi, I., Royan, N. R. R., & Idris, M. N. (2016). Kajian Sifat Mekanik Nanokomposit Epoksi Berpenguat Gentian Hibrid Nanotiub Karbon dan Nanozarah Tanah Liat. Sains Malaysiana, 45(8), 1259-1263.

Kajian Sifat Mekanik Nanokomposit Epoksi Berpenguat Gentian Hibrid Nanotiub Karbon dan Nanozarah Tanah Liat. / Ghani, Mohd Hafizuddin Ab; Salleh, Mohd Nazry; Chen, Ruey Shan; Ahmad, Sahrim; Hanafi, Ismail; Royan, Nishata Royan Rajendran; Idris, Mohd Nazri.

In: Sains Malaysiana, Vol. 45, No. 8, 01.08.2016, p. 1259-1263.

Research output: Contribution to journalArticle

Ghani, MHA, Salleh, MN, Chen, RS, Ahmad, S, Hanafi, I, Royan, NRR & Idris, MN 2016, 'Kajian Sifat Mekanik Nanokomposit Epoksi Berpenguat Gentian Hibrid Nanotiub Karbon dan Nanozarah Tanah Liat', Sains Malaysiana, vol. 45, no. 8, pp. 1259-1263.
Ghani MHA, Salleh MN, Chen RS, Ahmad S, Hanafi I, Royan NRR et al. Kajian Sifat Mekanik Nanokomposit Epoksi Berpenguat Gentian Hibrid Nanotiub Karbon dan Nanozarah Tanah Liat. Sains Malaysiana. 2016 Aug 1;45(8):1259-1263.
Ghani, Mohd Hafizuddin Ab ; Salleh, Mohd Nazry ; Chen, Ruey Shan ; Ahmad, Sahrim ; Hanafi, Ismail ; Royan, Nishata Royan Rajendran ; Idris, Mohd Nazri. / Kajian Sifat Mekanik Nanokomposit Epoksi Berpenguat Gentian Hibrid Nanotiub Karbon dan Nanozarah Tanah Liat. In: Sains Malaysiana. 2016 ; Vol. 45, No. 8. pp. 1259-1263.
@article{b2a478fb27154df88f98a15b92103a51,
title = "Kajian Sifat Mekanik Nanokomposit Epoksi Berpenguat Gentian Hibrid Nanotiub Karbon dan Nanozarah Tanah Liat",
abstract = "The study was performed to investigate the mechanical properties of epoxy nanocomposite reinforced hybrid fibre multi-wall carbon nanotubes (MWCNT) and nanoclay (NC). Nanocomposite hybrid nanoparticles were prepared by using mechanical stirrer and compression molding. From the flexural test measurements, the hybrid specimens gave higher strength than those of the other samples. The impact testing showed that the addition of nanoparticles to the sample cannot increase the samples properties. Scanning electron micrograph (SEM) shows better dispersion of hybrid filler in the matrix, that proves hybrid carbon nanotubes and nanoclay on certain amount of ratios can improve the mechanical properties of nanocomposite materials.",
keywords = "Carbon nanotubes, Epoxy, Hybrid filler, Nanoclay, Nanocomposite",
author = "Ghani, {Mohd Hafizuddin Ab} and Salleh, {Mohd Nazry} and Chen, {Ruey Shan} and Sahrim Ahmad and Ismail Hanafi and Royan, {Nishata Royan Rajendran} and Idris, {Mohd Nazri}",
year = "2016",
month = "8",
day = "1",
language = "Malay",
volume = "45",
pages = "1259--1263",
journal = "Sains Malaysiana",
issn = "0126-6039",
publisher = "Penerbit Universiti Kebangsaan Malaysia",
number = "8",

}

TY - JOUR

T1 - Kajian Sifat Mekanik Nanokomposit Epoksi Berpenguat Gentian Hibrid Nanotiub Karbon dan Nanozarah Tanah Liat

AU - Ghani, Mohd Hafizuddin Ab

AU - Salleh, Mohd Nazry

AU - Chen, Ruey Shan

AU - Ahmad, Sahrim

AU - Hanafi, Ismail

AU - Royan, Nishata Royan Rajendran

AU - Idris, Mohd Nazri

PY - 2016/8/1

Y1 - 2016/8/1

N2 - The study was performed to investigate the mechanical properties of epoxy nanocomposite reinforced hybrid fibre multi-wall carbon nanotubes (MWCNT) and nanoclay (NC). Nanocomposite hybrid nanoparticles were prepared by using mechanical stirrer and compression molding. From the flexural test measurements, the hybrid specimens gave higher strength than those of the other samples. The impact testing showed that the addition of nanoparticles to the sample cannot increase the samples properties. Scanning electron micrograph (SEM) shows better dispersion of hybrid filler in the matrix, that proves hybrid carbon nanotubes and nanoclay on certain amount of ratios can improve the mechanical properties of nanocomposite materials.

AB - The study was performed to investigate the mechanical properties of epoxy nanocomposite reinforced hybrid fibre multi-wall carbon nanotubes (MWCNT) and nanoclay (NC). Nanocomposite hybrid nanoparticles were prepared by using mechanical stirrer and compression molding. From the flexural test measurements, the hybrid specimens gave higher strength than those of the other samples. The impact testing showed that the addition of nanoparticles to the sample cannot increase the samples properties. Scanning electron micrograph (SEM) shows better dispersion of hybrid filler in the matrix, that proves hybrid carbon nanotubes and nanoclay on certain amount of ratios can improve the mechanical properties of nanocomposite materials.

KW - Carbon nanotubes

KW - Epoxy

KW - Hybrid filler

KW - Nanoclay

KW - Nanocomposite

UR - http://www.scopus.com/inward/record.url?scp=84989235097&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84989235097&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:84989235097

VL - 45

SP - 1259

EP - 1263

JO - Sains Malaysiana

JF - Sains Malaysiana

SN - 0126-6039

IS - 8

ER -