Mechanical properties of bone scaffold prototypes fabricated by 3D printer

Mohd Khairol Anuar Mohd Ariffin, Siti Hajar Fazel, Mohd Idris Shah Ismail, S. B. Mohamed, Zaliha Wahid

Research output: Contribution to journalArticle

Abstract

Additive Manufacturing techniques enable freeform fabricating even for complex design part. Human bone is consisted of porous structure and therefore, Additive Manufacturing has made production of low quantity with individual personalisation and as complex as real human bone now possible. ABS as potential material was utilized and porously designed was tested for compressive properties to decide whether it suits as bone replacement or not. After testing been conducted to different six specimen, it was concluded that the strength and elastics modulus is lower than they will be needed to serve expected loadings as human cortical bone.

Original languageEnglish
Pages (from-to)29-38
Number of pages10
JournalJournal of Engineering Science and Technology
Volume13
Issue numberSpecial Issue on WRICET (2016)
Publication statusPublished - 1 Nov 2018

Fingerprint

3D printers
Scaffolds
Bone
Mechanical properties
Elastic moduli
Testing

Keywords

  • 3D printer
  • Biomaterial
  • Compressive strength
  • Scaffold design

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Ariffin, M. K. A. M., Fazel, S. H., Ismail, M. I. S., Mohamed, S. B., & Wahid, Z. (2018). Mechanical properties of bone scaffold prototypes fabricated by 3D printer. Journal of Engineering Science and Technology, 13(Special Issue on WRICET (2016)), 29-38.

Mechanical properties of bone scaffold prototypes fabricated by 3D printer. / Ariffin, Mohd Khairol Anuar Mohd; Fazel, Siti Hajar; Ismail, Mohd Idris Shah; Mohamed, S. B.; Wahid, Zaliha.

In: Journal of Engineering Science and Technology, Vol. 13, No. Special Issue on WRICET (2016), 01.11.2018, p. 29-38.

Research output: Contribution to journalArticle

Ariffin, MKAM, Fazel, SH, Ismail, MIS, Mohamed, SB & Wahid, Z 2018, 'Mechanical properties of bone scaffold prototypes fabricated by 3D printer', Journal of Engineering Science and Technology, vol. 13, no. Special Issue on WRICET (2016), pp. 29-38.
Ariffin MKAM, Fazel SH, Ismail MIS, Mohamed SB, Wahid Z. Mechanical properties of bone scaffold prototypes fabricated by 3D printer. Journal of Engineering Science and Technology. 2018 Nov 1;13(Special Issue on WRICET (2016)):29-38.
Ariffin, Mohd Khairol Anuar Mohd ; Fazel, Siti Hajar ; Ismail, Mohd Idris Shah ; Mohamed, S. B. ; Wahid, Zaliha. / Mechanical properties of bone scaffold prototypes fabricated by 3D printer. In: Journal of Engineering Science and Technology. 2018 ; Vol. 13, No. Special Issue on WRICET (2016). pp. 29-38.
@article{0d2be3600f16449dad769882ea609e32,
title = "Mechanical properties of bone scaffold prototypes fabricated by 3D printer",
abstract = "Additive Manufacturing techniques enable freeform fabricating even for complex design part. Human bone is consisted of porous structure and therefore, Additive Manufacturing has made production of low quantity with individual personalisation and as complex as real human bone now possible. ABS as potential material was utilized and porously designed was tested for compressive properties to decide whether it suits as bone replacement or not. After testing been conducted to different six specimen, it was concluded that the strength and elastics modulus is lower than they will be needed to serve expected loadings as human cortical bone.",
keywords = "3D printer, Biomaterial, Compressive strength, Scaffold design",
author = "Ariffin, {Mohd Khairol Anuar Mohd} and Fazel, {Siti Hajar} and Ismail, {Mohd Idris Shah} and Mohamed, {S. B.} and Zaliha Wahid",
year = "2018",
month = "11",
day = "1",
language = "English",
volume = "13",
pages = "29--38",
journal = "Journal of Engineering Science and Technology",
issn = "1823-4690",
publisher = "Taylor's University College",
number = "Special Issue on WRICET (2016)",

}

TY - JOUR

T1 - Mechanical properties of bone scaffold prototypes fabricated by 3D printer

AU - Ariffin, Mohd Khairol Anuar Mohd

AU - Fazel, Siti Hajar

AU - Ismail, Mohd Idris Shah

AU - Mohamed, S. B.

AU - Wahid, Zaliha

PY - 2018/11/1

Y1 - 2018/11/1

N2 - Additive Manufacturing techniques enable freeform fabricating even for complex design part. Human bone is consisted of porous structure and therefore, Additive Manufacturing has made production of low quantity with individual personalisation and as complex as real human bone now possible. ABS as potential material was utilized and porously designed was tested for compressive properties to decide whether it suits as bone replacement or not. After testing been conducted to different six specimen, it was concluded that the strength and elastics modulus is lower than they will be needed to serve expected loadings as human cortical bone.

AB - Additive Manufacturing techniques enable freeform fabricating even for complex design part. Human bone is consisted of porous structure and therefore, Additive Manufacturing has made production of low quantity with individual personalisation and as complex as real human bone now possible. ABS as potential material was utilized and porously designed was tested for compressive properties to decide whether it suits as bone replacement or not. After testing been conducted to different six specimen, it was concluded that the strength and elastics modulus is lower than they will be needed to serve expected loadings as human cortical bone.

KW - 3D printer

KW - Biomaterial

KW - Compressive strength

KW - Scaffold design

UR - http://www.scopus.com/inward/record.url?scp=85061042760&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85061042760&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:85061042760

VL - 13

SP - 29

EP - 38

JO - Journal of Engineering Science and Technology

JF - Journal of Engineering Science and Technology

SN - 1823-4690

IS - Special Issue on WRICET (2016)

ER -