J-integral analysis of surface cracks in round bars under tension loadings

A. Emran Ismail, Ahmad Kamal Ariffin Mohd Ihsan, Shahrum Abdullah, Mariyam Jameelah Ghazali, Ruslizam Daud, M. Abdul Razzaq, A. Zulkifli

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

This paper presents a non-linear numerical investigation of surface cracks in round bars under tension stresses by using ANSYS finite element analysis (FEA). Due to the symmetrical analysis, only quarter finite element (FE) model was constructed and special attention was given at the crack tip of the cracks. The surface cracks were characterized by the dimensionless crack aspect ratio, a/b = 0.6, 0.8, 1.0 and 1.2, while the dimensionless relative crack depth, a/D = 0.1, 0.2 and 0.3. The square-root singularity of stresses and strains were modeled by shifting the mid-point nodes to the quarter-point locations in the region around the crack front. The proposed model was validated with the existing model before any further analysis. The elastic-plastic analysis under tension loading was assumed to follow the Ramberg-Osgood relation with n = 5 and 10. J values were determined for all positions along the crack front and then, the limit load was predicted using the J values obtained from FEA through the reference stress method.

Original languageEnglish
Title of host publicationApplied Mechanics and Materials
Pages37-42
Number of pages6
Volume52-54
DOIs
Publication statusPublished - 2011
Event2011 1st International Conference on Mechanical Engineering, ICME 2011 - Phuket
Duration: 3 Apr 20114 Apr 2011

Publication series

NameApplied Mechanics and Materials
Volume52-54
ISSN (Print)16609336
ISSN (Electronic)16627482

Other

Other2011 1st International Conference on Mechanical Engineering, ICME 2011
CityPhuket
Period3/4/114/4/11

Fingerprint

Cracks
Finite element method
Load limits
Crack tips
Aspect ratio
Plastics

Keywords

  • Finite element analysis
  • J-integral
  • Limit load
  • Stress intensity factor
  • Surface crack

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Ismail, A. E., Mohd Ihsan, A. K. A., Abdullah, S., Ghazali, M. J., Daud, R., Razzaq, M. A., & Zulkifli, A. (2011). J-integral analysis of surface cracks in round bars under tension loadings. In Applied Mechanics and Materials (Vol. 52-54, pp. 37-42). (Applied Mechanics and Materials; Vol. 52-54). https://doi.org/10.4028/www.scientific.net/AMM.52-54.37

J-integral analysis of surface cracks in round bars under tension loadings. / Ismail, A. Emran; Mohd Ihsan, Ahmad Kamal Ariffin; Abdullah, Shahrum; Ghazali, Mariyam Jameelah; Daud, Ruslizam; Razzaq, M. Abdul; Zulkifli, A.

Applied Mechanics and Materials. Vol. 52-54 2011. p. 37-42 (Applied Mechanics and Materials; Vol. 52-54).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ismail, AE, Mohd Ihsan, AKA, Abdullah, S, Ghazali, MJ, Daud, R, Razzaq, MA & Zulkifli, A 2011, J-integral analysis of surface cracks in round bars under tension loadings. in Applied Mechanics and Materials. vol. 52-54, Applied Mechanics and Materials, vol. 52-54, pp. 37-42, 2011 1st International Conference on Mechanical Engineering, ICME 2011, Phuket, 3/4/11. https://doi.org/10.4028/www.scientific.net/AMM.52-54.37
Ismail AE, Mohd Ihsan AKA, Abdullah S, Ghazali MJ, Daud R, Razzaq MA et al. J-integral analysis of surface cracks in round bars under tension loadings. In Applied Mechanics and Materials. Vol. 52-54. 2011. p. 37-42. (Applied Mechanics and Materials). https://doi.org/10.4028/www.scientific.net/AMM.52-54.37
Ismail, A. Emran ; Mohd Ihsan, Ahmad Kamal Ariffin ; Abdullah, Shahrum ; Ghazali, Mariyam Jameelah ; Daud, Ruslizam ; Razzaq, M. Abdul ; Zulkifli, A. / J-integral analysis of surface cracks in round bars under tension loadings. Applied Mechanics and Materials. Vol. 52-54 2011. pp. 37-42 (Applied Mechanics and Materials).
@inproceedings{19f3dbb2b709451e95ce1031f22ef901,
title = "J-integral analysis of surface cracks in round bars under tension loadings",
abstract = "This paper presents a non-linear numerical investigation of surface cracks in round bars under tension stresses by using ANSYS finite element analysis (FEA). Due to the symmetrical analysis, only quarter finite element (FE) model was constructed and special attention was given at the crack tip of the cracks. The surface cracks were characterized by the dimensionless crack aspect ratio, a/b = 0.6, 0.8, 1.0 and 1.2, while the dimensionless relative crack depth, a/D = 0.1, 0.2 and 0.3. The square-root singularity of stresses and strains were modeled by shifting the mid-point nodes to the quarter-point locations in the region around the crack front. The proposed model was validated with the existing model before any further analysis. The elastic-plastic analysis under tension loading was assumed to follow the Ramberg-Osgood relation with n = 5 and 10. J values were determined for all positions along the crack front and then, the limit load was predicted using the J values obtained from FEA through the reference stress method.",
keywords = "Finite element analysis, J-integral, Limit load, Stress intensity factor, Surface crack",
author = "Ismail, {A. Emran} and {Mohd Ihsan}, {Ahmad Kamal Ariffin} and Shahrum Abdullah and Ghazali, {Mariyam Jameelah} and Ruslizam Daud and Razzaq, {M. Abdul} and A. Zulkifli",
year = "2011",
doi = "10.4028/www.scientific.net/AMM.52-54.37",
language = "English",
isbn = "9783037850770",
volume = "52-54",
series = "Applied Mechanics and Materials",
pages = "37--42",
booktitle = "Applied Mechanics and Materials",

}

TY - GEN

T1 - J-integral analysis of surface cracks in round bars under tension loadings

AU - Ismail, A. Emran

AU - Mohd Ihsan, Ahmad Kamal Ariffin

AU - Abdullah, Shahrum

AU - Ghazali, Mariyam Jameelah

AU - Daud, Ruslizam

AU - Razzaq, M. Abdul

AU - Zulkifli, A.

PY - 2011

Y1 - 2011

N2 - This paper presents a non-linear numerical investigation of surface cracks in round bars under tension stresses by using ANSYS finite element analysis (FEA). Due to the symmetrical analysis, only quarter finite element (FE) model was constructed and special attention was given at the crack tip of the cracks. The surface cracks were characterized by the dimensionless crack aspect ratio, a/b = 0.6, 0.8, 1.0 and 1.2, while the dimensionless relative crack depth, a/D = 0.1, 0.2 and 0.3. The square-root singularity of stresses and strains were modeled by shifting the mid-point nodes to the quarter-point locations in the region around the crack front. The proposed model was validated with the existing model before any further analysis. The elastic-plastic analysis under tension loading was assumed to follow the Ramberg-Osgood relation with n = 5 and 10. J values were determined for all positions along the crack front and then, the limit load was predicted using the J values obtained from FEA through the reference stress method.

AB - This paper presents a non-linear numerical investigation of surface cracks in round bars under tension stresses by using ANSYS finite element analysis (FEA). Due to the symmetrical analysis, only quarter finite element (FE) model was constructed and special attention was given at the crack tip of the cracks. The surface cracks were characterized by the dimensionless crack aspect ratio, a/b = 0.6, 0.8, 1.0 and 1.2, while the dimensionless relative crack depth, a/D = 0.1, 0.2 and 0.3. The square-root singularity of stresses and strains were modeled by shifting the mid-point nodes to the quarter-point locations in the region around the crack front. The proposed model was validated with the existing model before any further analysis. The elastic-plastic analysis under tension loading was assumed to follow the Ramberg-Osgood relation with n = 5 and 10. J values were determined for all positions along the crack front and then, the limit load was predicted using the J values obtained from FEA through the reference stress method.

KW - Finite element analysis

KW - J-integral

KW - Limit load

KW - Stress intensity factor

KW - Surface crack

UR - http://www.scopus.com/inward/record.url?scp=79954460529&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=79954460529&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMM.52-54.37

DO - 10.4028/www.scientific.net/AMM.52-54.37

M3 - Conference contribution

AN - SCOPUS:79954460529

SN - 9783037850770

VL - 52-54

T3 - Applied Mechanics and Materials

SP - 37

EP - 42

BT - Applied Mechanics and Materials

ER -