Influence of the spinning rate on the β-phase formation in poly(vinylidene fluoride) (PVDF) films

Ibtisam Yahya Abdullah, Muhammad Yahaya, Mohammad Hafizuddin Jumali, Haider Mohammed Shanshool

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

In this work, the effect of rotational speed on the β-phase formation in PVDF films is investigated. The rotational speeds use in this work are 500, 1000, 2000 and 4000 rpm. All films are left to dry at room temperature. FTIR and XRD technique are employed to determine the phase formation while SEM is used to investigate the morphology of the films. The FTIR and XRD measurements confirm that the main phase formed in all PVDF films is β-phase. However, the β-phase contents vary with the spinning rate and the highest content is observed approximately 83% for 500 rpm film. SEM micrographs show the surface of all samples is porous structure and rough.

Original languageEnglish
Title of host publication1st UKM-ISESCO-COMSATS International Workshop on Nanotechnology for Young Scientists, IWYS 2016
PublisherAmerican Institute of Physics Inc.
Volume1838
ISBN (Electronic)9780735415089
DOIs
Publication statusPublished - 5 May 2017
Event1st UKM-ISESCO-COMSATS International Workshop on Nanotechnology for Young Scientists, IWYS 2016 - Selangor, Malaysia
Duration: 28 Nov 201630 Nov 2016

Other

Other1st UKM-ISESCO-COMSATS International Workshop on Nanotechnology for Young Scientists, IWYS 2016
CountryMalaysia
CitySelangor
Period28/11/1630/11/16

Fingerprint

vinylidene
metal spinning
fluorides
scanning electron microscopy
room temperature

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Cite this

Abdullah, I. Y., Yahaya, M., Jumali, M. H., & Shanshool, H. M. (2017). Influence of the spinning rate on the β-phase formation in poly(vinylidene fluoride) (PVDF) films. In 1st UKM-ISESCO-COMSATS International Workshop on Nanotechnology for Young Scientists, IWYS 2016 (Vol. 1838). [020016] American Institute of Physics Inc.. https://doi.org/10.1063/1.4982188

Influence of the spinning rate on the β-phase formation in poly(vinylidene fluoride) (PVDF) films. / Abdullah, Ibtisam Yahya; Yahaya, Muhammad; Jumali, Mohammad Hafizuddin; Shanshool, Haider Mohammed.

1st UKM-ISESCO-COMSATS International Workshop on Nanotechnology for Young Scientists, IWYS 2016. Vol. 1838 American Institute of Physics Inc., 2017. 020016.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abdullah, IY, Yahaya, M, Jumali, MH & Shanshool, HM 2017, Influence of the spinning rate on the β-phase formation in poly(vinylidene fluoride) (PVDF) films. in 1st UKM-ISESCO-COMSATS International Workshop on Nanotechnology for Young Scientists, IWYS 2016. vol. 1838, 020016, American Institute of Physics Inc., 1st UKM-ISESCO-COMSATS International Workshop on Nanotechnology for Young Scientists, IWYS 2016, Selangor, Malaysia, 28/11/16. https://doi.org/10.1063/1.4982188
Abdullah IY, Yahaya M, Jumali MH, Shanshool HM. Influence of the spinning rate on the β-phase formation in poly(vinylidene fluoride) (PVDF) films. In 1st UKM-ISESCO-COMSATS International Workshop on Nanotechnology for Young Scientists, IWYS 2016. Vol. 1838. American Institute of Physics Inc. 2017. 020016 https://doi.org/10.1063/1.4982188
Abdullah, Ibtisam Yahya ; Yahaya, Muhammad ; Jumali, Mohammad Hafizuddin ; Shanshool, Haider Mohammed. / Influence of the spinning rate on the β-phase formation in poly(vinylidene fluoride) (PVDF) films. 1st UKM-ISESCO-COMSATS International Workshop on Nanotechnology for Young Scientists, IWYS 2016. Vol. 1838 American Institute of Physics Inc., 2017.
@inproceedings{503b94d8817b4a48b58b99892bbfba97,
title = "Influence of the spinning rate on the β-phase formation in poly(vinylidene fluoride) (PVDF) films",
abstract = "In this work, the effect of rotational speed on the β-phase formation in PVDF films is investigated. The rotational speeds use in this work are 500, 1000, 2000 and 4000 rpm. All films are left to dry at room temperature. FTIR and XRD technique are employed to determine the phase formation while SEM is used to investigate the morphology of the films. The FTIR and XRD measurements confirm that the main phase formed in all PVDF films is β-phase. However, the β-phase contents vary with the spinning rate and the highest content is observed approximately 83{\%} for 500 rpm film. SEM micrographs show the surface of all samples is porous structure and rough.",
author = "Abdullah, {Ibtisam Yahya} and Muhammad Yahaya and Jumali, {Mohammad Hafizuddin} and Shanshool, {Haider Mohammed}",
year = "2017",
month = "5",
day = "5",
doi = "10.1063/1.4982188",
language = "English",
volume = "1838",
booktitle = "1st UKM-ISESCO-COMSATS International Workshop on Nanotechnology for Young Scientists, IWYS 2016",
publisher = "American Institute of Physics Inc.",

}

TY - GEN

T1 - Influence of the spinning rate on the β-phase formation in poly(vinylidene fluoride) (PVDF) films

AU - Abdullah, Ibtisam Yahya

AU - Yahaya, Muhammad

AU - Jumali, Mohammad Hafizuddin

AU - Shanshool, Haider Mohammed

PY - 2017/5/5

Y1 - 2017/5/5

N2 - In this work, the effect of rotational speed on the β-phase formation in PVDF films is investigated. The rotational speeds use in this work are 500, 1000, 2000 and 4000 rpm. All films are left to dry at room temperature. FTIR and XRD technique are employed to determine the phase formation while SEM is used to investigate the morphology of the films. The FTIR and XRD measurements confirm that the main phase formed in all PVDF films is β-phase. However, the β-phase contents vary with the spinning rate and the highest content is observed approximately 83% for 500 rpm film. SEM micrographs show the surface of all samples is porous structure and rough.

AB - In this work, the effect of rotational speed on the β-phase formation in PVDF films is investigated. The rotational speeds use in this work are 500, 1000, 2000 and 4000 rpm. All films are left to dry at room temperature. FTIR and XRD technique are employed to determine the phase formation while SEM is used to investigate the morphology of the films. The FTIR and XRD measurements confirm that the main phase formed in all PVDF films is β-phase. However, the β-phase contents vary with the spinning rate and the highest content is observed approximately 83% for 500 rpm film. SEM micrographs show the surface of all samples is porous structure and rough.

UR - http://www.scopus.com/inward/record.url?scp=85019995465&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85019995465&partnerID=8YFLogxK

U2 - 10.1063/1.4982188

DO - 10.1063/1.4982188

M3 - Conference contribution

AN - SCOPUS:85019995465

VL - 1838

BT - 1st UKM-ISESCO-COMSATS International Workshop on Nanotechnology for Young Scientists, IWYS 2016

PB - American Institute of Physics Inc.

ER -