In-service monitoring and failure identifying against fiber fault in FTTH with passive in-line monitoring (PIM) device

Mohd Syuhaimi Ab Rahman, Boonchuan Ng, Rosmawati Ismail, Abang Annuar Ehsan, Sahbudin Shaari

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

This paper focuses on developing a Passive In-line Monitoring (PIM) device prototype, which used to tap out a small ratio of triple-play signals for in-service monitoring and failure identifying against fiber fault in fiber-to-the-home (FTTH) access network. This device will be installed with the main lines in FTTH permanently to allow the technicians to simply connect it to a portable tester unit for transmission surveillance and failure detection. The PIM device is used to sharply determine the location of break point before repairing. A passive taper circuit is required to obtain the optical signals to provide a visual way of monitoring the receiving signal performance. This device is potentially to improve the service reliability and reduce the repairing cost and time.

Original languageEnglish
Title of host publicationProceedings - 2009 International Conference on Future Networks, ICFN 2009
Pages61-64
Number of pages4
DOIs
Publication statusPublished - 2009
Event2009 International Conference on Future Networks, ICFN 2009 - Bangkok
Duration: 7 Mar 20099 Mar 2009

Other

Other2009 International Conference on Future Networks, ICFN 2009
CityBangkok
Period7/3/099/3/09

Fingerprint

Fibers
Monitoring
Passive networks
Fiber to the x
Costs

Keywords

  • Failure detection
  • FTTH
  • In-service monitoring
  • PIM device
  • Transmission surveillance

ASJC Scopus subject areas

  • Computer Networks and Communications
  • Computer Science Applications
  • Hardware and Architecture

Cite this

Ab Rahman, M. S., Ng, B., Ismail, R., Ehsan, A. A., & Shaari, S. (2009). In-service monitoring and failure identifying against fiber fault in FTTH with passive in-line monitoring (PIM) device. In Proceedings - 2009 International Conference on Future Networks, ICFN 2009 (pp. 61-64). [5189899] https://doi.org/10.1109/ICFN.2009.63

In-service monitoring and failure identifying against fiber fault in FTTH with passive in-line monitoring (PIM) device. / Ab Rahman, Mohd Syuhaimi; Ng, Boonchuan; Ismail, Rosmawati; Ehsan, Abang Annuar; Shaari, Sahbudin.

Proceedings - 2009 International Conference on Future Networks, ICFN 2009. 2009. p. 61-64 5189899.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ab Rahman, MS, Ng, B, Ismail, R, Ehsan, AA & Shaari, S 2009, In-service monitoring and failure identifying against fiber fault in FTTH with passive in-line monitoring (PIM) device. in Proceedings - 2009 International Conference on Future Networks, ICFN 2009., 5189899, pp. 61-64, 2009 International Conference on Future Networks, ICFN 2009, Bangkok, 7/3/09. https://doi.org/10.1109/ICFN.2009.63
Ab Rahman MS, Ng B, Ismail R, Ehsan AA, Shaari S. In-service monitoring and failure identifying against fiber fault in FTTH with passive in-line monitoring (PIM) device. In Proceedings - 2009 International Conference on Future Networks, ICFN 2009. 2009. p. 61-64. 5189899 https://doi.org/10.1109/ICFN.2009.63
Ab Rahman, Mohd Syuhaimi ; Ng, Boonchuan ; Ismail, Rosmawati ; Ehsan, Abang Annuar ; Shaari, Sahbudin. / In-service monitoring and failure identifying against fiber fault in FTTH with passive in-line monitoring (PIM) device. Proceedings - 2009 International Conference on Future Networks, ICFN 2009. 2009. pp. 61-64
@inproceedings{770c0f23ee3149f99da294880853c912,
title = "In-service monitoring and failure identifying against fiber fault in FTTH with passive in-line monitoring (PIM) device",
abstract = "This paper focuses on developing a Passive In-line Monitoring (PIM) device prototype, which used to tap out a small ratio of triple-play signals for in-service monitoring and failure identifying against fiber fault in fiber-to-the-home (FTTH) access network. This device will be installed with the main lines in FTTH permanently to allow the technicians to simply connect it to a portable tester unit for transmission surveillance and failure detection. The PIM device is used to sharply determine the location of break point before repairing. A passive taper circuit is required to obtain the optical signals to provide a visual way of monitoring the receiving signal performance. This device is potentially to improve the service reliability and reduce the repairing cost and time.",
keywords = "Failure detection, FTTH, In-service monitoring, PIM device, Transmission surveillance",
author = "{Ab Rahman}, {Mohd Syuhaimi} and Boonchuan Ng and Rosmawati Ismail and Ehsan, {Abang Annuar} and Sahbudin Shaari",
year = "2009",
doi = "10.1109/ICFN.2009.63",
language = "English",
isbn = "9780769535678",
pages = "61--64",
booktitle = "Proceedings - 2009 International Conference on Future Networks, ICFN 2009",

}

TY - GEN

T1 - In-service monitoring and failure identifying against fiber fault in FTTH with passive in-line monitoring (PIM) device

AU - Ab Rahman, Mohd Syuhaimi

AU - Ng, Boonchuan

AU - Ismail, Rosmawati

AU - Ehsan, Abang Annuar

AU - Shaari, Sahbudin

PY - 2009

Y1 - 2009

N2 - This paper focuses on developing a Passive In-line Monitoring (PIM) device prototype, which used to tap out a small ratio of triple-play signals for in-service monitoring and failure identifying against fiber fault in fiber-to-the-home (FTTH) access network. This device will be installed with the main lines in FTTH permanently to allow the technicians to simply connect it to a portable tester unit for transmission surveillance and failure detection. The PIM device is used to sharply determine the location of break point before repairing. A passive taper circuit is required to obtain the optical signals to provide a visual way of monitoring the receiving signal performance. This device is potentially to improve the service reliability and reduce the repairing cost and time.

AB - This paper focuses on developing a Passive In-line Monitoring (PIM) device prototype, which used to tap out a small ratio of triple-play signals for in-service monitoring and failure identifying against fiber fault in fiber-to-the-home (FTTH) access network. This device will be installed with the main lines in FTTH permanently to allow the technicians to simply connect it to a portable tester unit for transmission surveillance and failure detection. The PIM device is used to sharply determine the location of break point before repairing. A passive taper circuit is required to obtain the optical signals to provide a visual way of monitoring the receiving signal performance. This device is potentially to improve the service reliability and reduce the repairing cost and time.

KW - Failure detection

KW - FTTH

KW - In-service monitoring

KW - PIM device

KW - Transmission surveillance

UR - http://www.scopus.com/inward/record.url?scp=70449342715&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=70449342715&partnerID=8YFLogxK

U2 - 10.1109/ICFN.2009.63

DO - 10.1109/ICFN.2009.63

M3 - Conference contribution

SN - 9780769535678

SP - 61

EP - 64

BT - Proceedings - 2009 International Conference on Future Networks, ICFN 2009

ER -