Improving performance of handwork-fused 1×3 polymer optical fiber splitter through progressed fusion technique

Mohd Hazwan Harun, Mohd Syuhaimi Ab Rahman, Mohd Hadi Guna Safnal

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

As demands for Plastic Optical Fiber (POF) rise up increasingly in optical data communication system, POF is now being applied as base material for optical device including passive splitter. In order to produce the economical passive device, 1×3 splitters have been fabricated four times through handwork fusion. In order to investigate the power efficiency of each splitter, red LED with wavelength of 650 nm has been transmitted through splitter's input. As result, the performance of splitter improved inconsistently and the latest 1×3 splitter reveal that maximum power could be reached up to 60%. This paper highlights that fusion technique by handwork is realiable fabrication method rather using expensive machine to fabricate POF-based optical splitter. However, it has no consistency in fabricating good-performance splitter.

Original languageEnglish
Title of host publicationICCTD 2009 - 2009 International Conference on Computer Technology and Development
Pages291-294
Number of pages4
Volume1
DOIs
Publication statusPublished - 2009
Event2009 International Conference on Computer Technology and Development, ICCTD 2009 - Kota Kinabalu
Duration: 13 Nov 200915 Nov 2009

Other

Other2009 International Conference on Computer Technology and Development, ICCTD 2009
CityKota Kinabalu
Period13/11/0915/11/09

Fingerprint

Plastic optical fibers
Fusion reactions
Optical devices
Data communication systems
Light emitting diodes
Fabrication
Wavelength

Keywords

  • Fusion technique
  • Optical splitter
  • POF
  • Polymer optical fiber

ASJC Scopus subject areas

  • Computer Science(all)

Cite this

Harun, M. H., Ab Rahman, M. S., & Safnal, M. H. G. (2009). Improving performance of handwork-fused 1×3 polymer optical fiber splitter through progressed fusion technique. In ICCTD 2009 - 2009 International Conference on Computer Technology and Development (Vol. 1, pp. 291-294). [5359675] https://doi.org/10.1109/ICCTD.2009.25

Improving performance of handwork-fused 1×3 polymer optical fiber splitter through progressed fusion technique. / Harun, Mohd Hazwan; Ab Rahman, Mohd Syuhaimi; Safnal, Mohd Hadi Guna.

ICCTD 2009 - 2009 International Conference on Computer Technology and Development. Vol. 1 2009. p. 291-294 5359675.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Harun, MH, Ab Rahman, MS & Safnal, MHG 2009, Improving performance of handwork-fused 1×3 polymer optical fiber splitter through progressed fusion technique. in ICCTD 2009 - 2009 International Conference on Computer Technology and Development. vol. 1, 5359675, pp. 291-294, 2009 International Conference on Computer Technology and Development, ICCTD 2009, Kota Kinabalu, 13/11/09. https://doi.org/10.1109/ICCTD.2009.25
Harun MH, Ab Rahman MS, Safnal MHG. Improving performance of handwork-fused 1×3 polymer optical fiber splitter through progressed fusion technique. In ICCTD 2009 - 2009 International Conference on Computer Technology and Development. Vol. 1. 2009. p. 291-294. 5359675 https://doi.org/10.1109/ICCTD.2009.25
Harun, Mohd Hazwan ; Ab Rahman, Mohd Syuhaimi ; Safnal, Mohd Hadi Guna. / Improving performance of handwork-fused 1×3 polymer optical fiber splitter through progressed fusion technique. ICCTD 2009 - 2009 International Conference on Computer Technology and Development. Vol. 1 2009. pp. 291-294
@inproceedings{f1403cde0b0940e39159f366fb19e119,
title = "Improving performance of handwork-fused 1×3 polymer optical fiber splitter through progressed fusion technique",
abstract = "As demands for Plastic Optical Fiber (POF) rise up increasingly in optical data communication system, POF is now being applied as base material for optical device including passive splitter. In order to produce the economical passive device, 1×3 splitters have been fabricated four times through handwork fusion. In order to investigate the power efficiency of each splitter, red LED with wavelength of 650 nm has been transmitted through splitter's input. As result, the performance of splitter improved inconsistently and the latest 1×3 splitter reveal that maximum power could be reached up to 60{\%}. This paper highlights that fusion technique by handwork is realiable fabrication method rather using expensive machine to fabricate POF-based optical splitter. However, it has no consistency in fabricating good-performance splitter.",
keywords = "Fusion technique, Optical splitter, POF, Polymer optical fiber",
author = "Harun, {Mohd Hazwan} and {Ab Rahman}, {Mohd Syuhaimi} and Safnal, {Mohd Hadi Guna}",
year = "2009",
doi = "10.1109/ICCTD.2009.25",
language = "English",
isbn = "9780769538921",
volume = "1",
pages = "291--294",
booktitle = "ICCTD 2009 - 2009 International Conference on Computer Technology and Development",

}

TY - GEN

T1 - Improving performance of handwork-fused 1×3 polymer optical fiber splitter through progressed fusion technique

AU - Harun, Mohd Hazwan

AU - Ab Rahman, Mohd Syuhaimi

AU - Safnal, Mohd Hadi Guna

PY - 2009

Y1 - 2009

N2 - As demands for Plastic Optical Fiber (POF) rise up increasingly in optical data communication system, POF is now being applied as base material for optical device including passive splitter. In order to produce the economical passive device, 1×3 splitters have been fabricated four times through handwork fusion. In order to investigate the power efficiency of each splitter, red LED with wavelength of 650 nm has been transmitted through splitter's input. As result, the performance of splitter improved inconsistently and the latest 1×3 splitter reveal that maximum power could be reached up to 60%. This paper highlights that fusion technique by handwork is realiable fabrication method rather using expensive machine to fabricate POF-based optical splitter. However, it has no consistency in fabricating good-performance splitter.

AB - As demands for Plastic Optical Fiber (POF) rise up increasingly in optical data communication system, POF is now being applied as base material for optical device including passive splitter. In order to produce the economical passive device, 1×3 splitters have been fabricated four times through handwork fusion. In order to investigate the power efficiency of each splitter, red LED with wavelength of 650 nm has been transmitted through splitter's input. As result, the performance of splitter improved inconsistently and the latest 1×3 splitter reveal that maximum power could be reached up to 60%. This paper highlights that fusion technique by handwork is realiable fabrication method rather using expensive machine to fabricate POF-based optical splitter. However, it has no consistency in fabricating good-performance splitter.

KW - Fusion technique

KW - Optical splitter

KW - POF

KW - Polymer optical fiber

UR - http://www.scopus.com/inward/record.url?scp=77951096149&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77951096149&partnerID=8YFLogxK

U2 - 10.1109/ICCTD.2009.25

DO - 10.1109/ICCTD.2009.25

M3 - Conference contribution

AN - SCOPUS:77951096149

SN - 9780769538921

VL - 1

SP - 291

EP - 294

BT - ICCTD 2009 - 2009 International Conference on Computer Technology and Development

ER -