Hysteresis inverters based active power filter design by suppaptinarm multi-objective simulated annealing

H. R Imani Jajarmi, Azah Mohamed, H. Shareef

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

This paper introduces an optimal power filter design method to compensate simultaneously current harmonics and reactive power of a nonlinear load. The power filter consists of a passive RL low-pass filter placed in series with the load and a pure active power filter which has RL elements connected in series with an insulated gate bipolar transistors (IGBTs) based voltage source converter. The filter is supposed to inject a current into the connection node of the load and grid in order to eliminate current harmonics and its imaginary current. The voltage source converter is placed in a hysteresis feedback control loop to generate the reference current. The bandwidth and output amplitude of the hysteresis controller are optimized with inductance of RL filters. Three objective functions are considered in the optimization problem, which include minimizing current total harmonic distortion, maximizing power factor, and minimizing the IGBT bridge current. For solving the optimization problem, two well-known multi-objective evolutionary algorithm are applied, namely, Suppaptinarm Multi-Objective Simulated Annealing (SMOSA) and Non-dominated Sorting Genetic Algorithm-II (NSGA-II). The results obtained from the MATLAB\simulink simulations show the effectiveness of the method in achieving the objectives.

Original languageEnglish
Title of host publicationProceeding - 2013 IEEE Student Conference on Research and Development, SCOReD 2013
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages248-253
Number of pages6
ISBN (Print)9781479926565
DOIs
Publication statusPublished - 6 Jan 2015
Event2013 11th IEEE Student Conference on Research and Development, SCOReD 2013 - Putrajaya
Duration: 16 Dec 201317 Dec 2013

Other

Other2013 11th IEEE Student Conference on Research and Development, SCOReD 2013
CityPutrajaya
Period16/12/1317/12/13

Fingerprint

Insulated gate bipolar transistors (IGBT)
Simulated annealing
Hysteresis
Passive filters
Wave filters
Low pass filters
Harmonic distortion
Electric potential
Reactive power
Sorting
Evolutionary algorithms
Inductance
MATLAB
Feedback control
Genetic algorithms
Bandwidth
Controllers

Keywords

  • Active Power Filter
  • Harmonic Filtering
  • Multi-Objective Optimization
  • NSGA-II
  • Power Factor Correction
  • SMOSA

ASJC Scopus subject areas

  • Control and Systems Engineering
  • Biomedical Engineering
  • Electrical and Electronic Engineering

Cite this

Jajarmi, H. R. I., Mohamed, A., & Shareef, H. (2015). Hysteresis inverters based active power filter design by suppaptinarm multi-objective simulated annealing. In Proceeding - 2013 IEEE Student Conference on Research and Development, SCOReD 2013 (pp. 248-253). [7002581] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/SCOReD.2013.7002581

Hysteresis inverters based active power filter design by suppaptinarm multi-objective simulated annealing. / Jajarmi, H. R Imani; Mohamed, Azah; Shareef, H.

Proceeding - 2013 IEEE Student Conference on Research and Development, SCOReD 2013. Institute of Electrical and Electronics Engineers Inc., 2015. p. 248-253 7002581.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Jajarmi, HRI, Mohamed, A & Shareef, H 2015, Hysteresis inverters based active power filter design by suppaptinarm multi-objective simulated annealing. in Proceeding - 2013 IEEE Student Conference on Research and Development, SCOReD 2013., 7002581, Institute of Electrical and Electronics Engineers Inc., pp. 248-253, 2013 11th IEEE Student Conference on Research and Development, SCOReD 2013, Putrajaya, 16/12/13. https://doi.org/10.1109/SCOReD.2013.7002581
Jajarmi HRI, Mohamed A, Shareef H. Hysteresis inverters based active power filter design by suppaptinarm multi-objective simulated annealing. In Proceeding - 2013 IEEE Student Conference on Research and Development, SCOReD 2013. Institute of Electrical and Electronics Engineers Inc. 2015. p. 248-253. 7002581 https://doi.org/10.1109/SCOReD.2013.7002581
Jajarmi, H. R Imani ; Mohamed, Azah ; Shareef, H. / Hysteresis inverters based active power filter design by suppaptinarm multi-objective simulated annealing. Proceeding - 2013 IEEE Student Conference on Research and Development, SCOReD 2013. Institute of Electrical and Electronics Engineers Inc., 2015. pp. 248-253
@inproceedings{612ba48ed1a344edb6c3311dc2599391,
title = "Hysteresis inverters based active power filter design by suppaptinarm multi-objective simulated annealing",
abstract = "This paper introduces an optimal power filter design method to compensate simultaneously current harmonics and reactive power of a nonlinear load. The power filter consists of a passive RL low-pass filter placed in series with the load and a pure active power filter which has RL elements connected in series with an insulated gate bipolar transistors (IGBTs) based voltage source converter. The filter is supposed to inject a current into the connection node of the load and grid in order to eliminate current harmonics and its imaginary current. The voltage source converter is placed in a hysteresis feedback control loop to generate the reference current. The bandwidth and output amplitude of the hysteresis controller are optimized with inductance of RL filters. Three objective functions are considered in the optimization problem, which include minimizing current total harmonic distortion, maximizing power factor, and minimizing the IGBT bridge current. For solving the optimization problem, two well-known multi-objective evolutionary algorithm are applied, namely, Suppaptinarm Multi-Objective Simulated Annealing (SMOSA) and Non-dominated Sorting Genetic Algorithm-II (NSGA-II). The results obtained from the MATLAB\simulink simulations show the effectiveness of the method in achieving the objectives.",
keywords = "Active Power Filter, Harmonic Filtering, Multi-Objective Optimization, NSGA-II, Power Factor Correction, SMOSA",
author = "Jajarmi, {H. R Imani} and Azah Mohamed and H. Shareef",
year = "2015",
month = "1",
day = "6",
doi = "10.1109/SCOReD.2013.7002581",
language = "English",
isbn = "9781479926565",
pages = "248--253",
booktitle = "Proceeding - 2013 IEEE Student Conference on Research and Development, SCOReD 2013",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - GEN

T1 - Hysteresis inverters based active power filter design by suppaptinarm multi-objective simulated annealing

AU - Jajarmi, H. R Imani

AU - Mohamed, Azah

AU - Shareef, H.

PY - 2015/1/6

Y1 - 2015/1/6

N2 - This paper introduces an optimal power filter design method to compensate simultaneously current harmonics and reactive power of a nonlinear load. The power filter consists of a passive RL low-pass filter placed in series with the load and a pure active power filter which has RL elements connected in series with an insulated gate bipolar transistors (IGBTs) based voltage source converter. The filter is supposed to inject a current into the connection node of the load and grid in order to eliminate current harmonics and its imaginary current. The voltage source converter is placed in a hysteresis feedback control loop to generate the reference current. The bandwidth and output amplitude of the hysteresis controller are optimized with inductance of RL filters. Three objective functions are considered in the optimization problem, which include minimizing current total harmonic distortion, maximizing power factor, and minimizing the IGBT bridge current. For solving the optimization problem, two well-known multi-objective evolutionary algorithm are applied, namely, Suppaptinarm Multi-Objective Simulated Annealing (SMOSA) and Non-dominated Sorting Genetic Algorithm-II (NSGA-II). The results obtained from the MATLAB\simulink simulations show the effectiveness of the method in achieving the objectives.

AB - This paper introduces an optimal power filter design method to compensate simultaneously current harmonics and reactive power of a nonlinear load. The power filter consists of a passive RL low-pass filter placed in series with the load and a pure active power filter which has RL elements connected in series with an insulated gate bipolar transistors (IGBTs) based voltage source converter. The filter is supposed to inject a current into the connection node of the load and grid in order to eliminate current harmonics and its imaginary current. The voltage source converter is placed in a hysteresis feedback control loop to generate the reference current. The bandwidth and output amplitude of the hysteresis controller are optimized with inductance of RL filters. Three objective functions are considered in the optimization problem, which include minimizing current total harmonic distortion, maximizing power factor, and minimizing the IGBT bridge current. For solving the optimization problem, two well-known multi-objective evolutionary algorithm are applied, namely, Suppaptinarm Multi-Objective Simulated Annealing (SMOSA) and Non-dominated Sorting Genetic Algorithm-II (NSGA-II). The results obtained from the MATLAB\simulink simulations show the effectiveness of the method in achieving the objectives.

KW - Active Power Filter

KW - Harmonic Filtering

KW - Multi-Objective Optimization

KW - NSGA-II

KW - Power Factor Correction

KW - SMOSA

UR - http://www.scopus.com/inward/record.url?scp=84921814659&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84921814659&partnerID=8YFLogxK

U2 - 10.1109/SCOReD.2013.7002581

DO - 10.1109/SCOReD.2013.7002581

M3 - Conference contribution

SN - 9781479926565

SP - 248

EP - 253

BT - Proceeding - 2013 IEEE Student Conference on Research and Development, SCOReD 2013

PB - Institute of Electrical and Electronics Engineers Inc.

ER -