High transmission 1D photonic crystal/photonic wire multiple cavity structures based on silicon-on-insulator

Md Zain Ahmad Rifqi, Nigel P. Johnson, Richard M. De La Rue

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

This paper describes the design, modeling, fabrication and characterization of single-row photonic crystal multiple micro-cavity structures embedded in 500 nm photonic wire waveguides. The strength of coupling between the resonators and the free spectral range (FSR) between the split resonance frequencies of the coupled-cavity combination were controlled via the use of different numbers of periodic hole structures - and through the use of different aperiodic hole taper arrangements between the two cavities in the middle mirror section of the mirrors. Both 2D and 3D finite-difference time-domain (FDTD) computations have been used to simulate the device structures. Comparisons have been made with the results of measurements and show good agreement.

Original languageEnglish
Title of host publicationPhotonic Crystal Materials and Devices VIII
Volume6989
DOIs
Publication statusPublished - 2008
Externally publishedYes
EventPhotonic Crystal Materials and Devices VIII - Strasbourg, France
Duration: 8 Apr 200810 Apr 2008

Other

OtherPhotonic Crystal Materials and Devices VIII
CountryFrance
CityStrasbourg
Period8/4/0810/4/08

Fingerprint

Photonic crystals
Photonics
Resonators
Mirrors
Waveguides
insulators
Single crystals
wire
Wire
photonics
Fabrication
Silicon
cavities
silicon
mirrors
crystals
tapering
resonators
waveguides
fabrication

Keywords

  • Micro-cavities
  • Multiple cavity
  • Photonic crystal
  • Photonic wires
  • Q-factor
  • Silicon-on-insulator (SOI)

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Condensed Matter Physics

Cite this

Ahmad Rifqi, M. Z., Johnson, N. P., & De La Rue, R. M. (2008). High transmission 1D photonic crystal/photonic wire multiple cavity structures based on silicon-on-insulator. In Photonic Crystal Materials and Devices VIII (Vol. 6989). [69891A] https://doi.org/10.1117/12.780417

High transmission 1D photonic crystal/photonic wire multiple cavity structures based on silicon-on-insulator. / Ahmad Rifqi, Md Zain; Johnson, Nigel P.; De La Rue, Richard M.

Photonic Crystal Materials and Devices VIII. Vol. 6989 2008. 69891A.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ahmad Rifqi, MZ, Johnson, NP & De La Rue, RM 2008, High transmission 1D photonic crystal/photonic wire multiple cavity structures based on silicon-on-insulator. in Photonic Crystal Materials and Devices VIII. vol. 6989, 69891A, Photonic Crystal Materials and Devices VIII, Strasbourg, France, 8/4/08. https://doi.org/10.1117/12.780417
Ahmad Rifqi, Md Zain ; Johnson, Nigel P. ; De La Rue, Richard M. / High transmission 1D photonic crystal/photonic wire multiple cavity structures based on silicon-on-insulator. Photonic Crystal Materials and Devices VIII. Vol. 6989 2008.
@inproceedings{6ce8661b3ad94175bdec59774a0f800a,
title = "High transmission 1D photonic crystal/photonic wire multiple cavity structures based on silicon-on-insulator",
abstract = "This paper describes the design, modeling, fabrication and characterization of single-row photonic crystal multiple micro-cavity structures embedded in 500 nm photonic wire waveguides. The strength of coupling between the resonators and the free spectral range (FSR) between the split resonance frequencies of the coupled-cavity combination were controlled via the use of different numbers of periodic hole structures - and through the use of different aperiodic hole taper arrangements between the two cavities in the middle mirror section of the mirrors. Both 2D and 3D finite-difference time-domain (FDTD) computations have been used to simulate the device structures. Comparisons have been made with the results of measurements and show good agreement.",
keywords = "Micro-cavities, Multiple cavity, Photonic crystal, Photonic wires, Q-factor, Silicon-on-insulator (SOI)",
author = "{Ahmad Rifqi}, {Md Zain} and Johnson, {Nigel P.} and {De La Rue}, {Richard M.}",
year = "2008",
doi = "10.1117/12.780417",
language = "English",
isbn = "9780819471871",
volume = "6989",
booktitle = "Photonic Crystal Materials and Devices VIII",

}

TY - GEN

T1 - High transmission 1D photonic crystal/photonic wire multiple cavity structures based on silicon-on-insulator

AU - Ahmad Rifqi, Md Zain

AU - Johnson, Nigel P.

AU - De La Rue, Richard M.

PY - 2008

Y1 - 2008

N2 - This paper describes the design, modeling, fabrication and characterization of single-row photonic crystal multiple micro-cavity structures embedded in 500 nm photonic wire waveguides. The strength of coupling between the resonators and the free spectral range (FSR) between the split resonance frequencies of the coupled-cavity combination were controlled via the use of different numbers of periodic hole structures - and through the use of different aperiodic hole taper arrangements between the two cavities in the middle mirror section of the mirrors. Both 2D and 3D finite-difference time-domain (FDTD) computations have been used to simulate the device structures. Comparisons have been made with the results of measurements and show good agreement.

AB - This paper describes the design, modeling, fabrication and characterization of single-row photonic crystal multiple micro-cavity structures embedded in 500 nm photonic wire waveguides. The strength of coupling between the resonators and the free spectral range (FSR) between the split resonance frequencies of the coupled-cavity combination were controlled via the use of different numbers of periodic hole structures - and through the use of different aperiodic hole taper arrangements between the two cavities in the middle mirror section of the mirrors. Both 2D and 3D finite-difference time-domain (FDTD) computations have been used to simulate the device structures. Comparisons have been made with the results of measurements and show good agreement.

KW - Micro-cavities

KW - Multiple cavity

KW - Photonic crystal

KW - Photonic wires

KW - Q-factor

KW - Silicon-on-insulator (SOI)

UR - http://www.scopus.com/inward/record.url?scp=45149102977&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=45149102977&partnerID=8YFLogxK

U2 - 10.1117/12.780417

DO - 10.1117/12.780417

M3 - Conference contribution

SN - 9780819471871

VL - 6989

BT - Photonic Crystal Materials and Devices VIII

ER -