High temperature corrosion of Fe-30Cr in flowing CO 2 gas

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

A plate of Fe-3°Cr (wt%) were subjected to isothermal furnace at 600 °C in flowing CO 2 gas at total pressure of approximately 1 atm. The reacted samples morphology and microstructure were characterized by using visual inspection, optical microscope, SEM and EDAX. The weight change measurement showed a fluctuating result during the exposure. The significant weight loss was observed after five hours exposure due to oxide scale exfoliation. Formation of different oxide and element presents on the interface of the specimen such as Cr 2O 3, C and Fe 3C were revealed by X-ray diffraction and with supported by EDAX analysis. This behavior of the high temperature corrosion on Fe-30Cr was discussed based on morphology and microstructure observation.

Original languageEnglish
Title of host publicationAdvanced Materials Research
Pages165-168
Number of pages4
Volume501
DOIs
Publication statusPublished - 2012
Event26th Regional Conference on Solid State Science and Technology, RCSSST 2011 - Seremban, Negeri Sembilan
Duration: 22 Nov 201124 Nov 2011

Publication series

NameAdvanced Materials Research
Volume501
ISSN (Print)10226680

Other

Other26th Regional Conference on Solid State Science and Technology, RCSSST 2011
CitySeremban, Negeri Sembilan
Period22/11/1124/11/11

Fingerprint

Energy dispersive spectroscopy
Corrosion
Microstructure
Oxides
Gases
Furnaces
Microscopes
Inspection
X ray diffraction
Temperature
Scanning electron microscopy

Keywords

  • Carburization
  • Cr O
  • Fe-Cr alloy
  • Oxidation

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Nurul Atikah, S., Othman, N. K., & Jalar @ Jalil, A. (2012). High temperature corrosion of Fe-30Cr in flowing CO 2 gas. In Advanced Materials Research (Vol. 501, pp. 165-168). (Advanced Materials Research; Vol. 501). https://doi.org/10.4028/www.scientific.net/AMR.501.165

High temperature corrosion of Fe-30Cr in flowing CO 2 gas. / Nurul Atikah, S.; Othman, Norinsan Kamil; Jalar @ Jalil, Azman.

Advanced Materials Research. Vol. 501 2012. p. 165-168 (Advanced Materials Research; Vol. 501).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nurul Atikah, S, Othman, NK & Jalar @ Jalil, A 2012, High temperature corrosion of Fe-30Cr in flowing CO 2 gas. in Advanced Materials Research. vol. 501, Advanced Materials Research, vol. 501, pp. 165-168, 26th Regional Conference on Solid State Science and Technology, RCSSST 2011, Seremban, Negeri Sembilan, 22/11/11. https://doi.org/10.4028/www.scientific.net/AMR.501.165
Nurul Atikah S, Othman NK, Jalar @ Jalil A. High temperature corrosion of Fe-30Cr in flowing CO 2 gas. In Advanced Materials Research. Vol. 501. 2012. p. 165-168. (Advanced Materials Research). https://doi.org/10.4028/www.scientific.net/AMR.501.165
Nurul Atikah, S. ; Othman, Norinsan Kamil ; Jalar @ Jalil, Azman. / High temperature corrosion of Fe-30Cr in flowing CO 2 gas. Advanced Materials Research. Vol. 501 2012. pp. 165-168 (Advanced Materials Research).
@inproceedings{93434f16e1de4af29da22d0d21709d3a,
title = "High temperature corrosion of Fe-30Cr in flowing CO 2 gas",
abstract = "A plate of Fe-3°Cr (wt{\%}) were subjected to isothermal furnace at 600 °C in flowing CO 2 gas at total pressure of approximately 1 atm. The reacted samples morphology and microstructure were characterized by using visual inspection, optical microscope, SEM and EDAX. The weight change measurement showed a fluctuating result during the exposure. The significant weight loss was observed after five hours exposure due to oxide scale exfoliation. Formation of different oxide and element presents on the interface of the specimen such as Cr 2O 3, C and Fe 3C were revealed by X-ray diffraction and with supported by EDAX analysis. This behavior of the high temperature corrosion on Fe-30Cr was discussed based on morphology and microstructure observation.",
keywords = "Carburization, Cr O, Fe-Cr alloy, Oxidation",
author = "{Nurul Atikah}, S. and Othman, {Norinsan Kamil} and {Jalar @ Jalil}, Azman",
year = "2012",
doi = "10.4028/www.scientific.net/AMR.501.165",
language = "English",
isbn = "9783037854020",
volume = "501",
series = "Advanced Materials Research",
pages = "165--168",
booktitle = "Advanced Materials Research",

}

TY - GEN

T1 - High temperature corrosion of Fe-30Cr in flowing CO 2 gas

AU - Nurul Atikah, S.

AU - Othman, Norinsan Kamil

AU - Jalar @ Jalil, Azman

PY - 2012

Y1 - 2012

N2 - A plate of Fe-3°Cr (wt%) were subjected to isothermal furnace at 600 °C in flowing CO 2 gas at total pressure of approximately 1 atm. The reacted samples morphology and microstructure were characterized by using visual inspection, optical microscope, SEM and EDAX. The weight change measurement showed a fluctuating result during the exposure. The significant weight loss was observed after five hours exposure due to oxide scale exfoliation. Formation of different oxide and element presents on the interface of the specimen such as Cr 2O 3, C and Fe 3C were revealed by X-ray diffraction and with supported by EDAX analysis. This behavior of the high temperature corrosion on Fe-30Cr was discussed based on morphology and microstructure observation.

AB - A plate of Fe-3°Cr (wt%) were subjected to isothermal furnace at 600 °C in flowing CO 2 gas at total pressure of approximately 1 atm. The reacted samples morphology and microstructure were characterized by using visual inspection, optical microscope, SEM and EDAX. The weight change measurement showed a fluctuating result during the exposure. The significant weight loss was observed after five hours exposure due to oxide scale exfoliation. Formation of different oxide and element presents on the interface of the specimen such as Cr 2O 3, C and Fe 3C were revealed by X-ray diffraction and with supported by EDAX analysis. This behavior of the high temperature corrosion on Fe-30Cr was discussed based on morphology and microstructure observation.

KW - Carburization

KW - Cr O

KW - Fe-Cr alloy

KW - Oxidation

UR - http://www.scopus.com/inward/record.url?scp=84860727621&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84860727621&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMR.501.165

DO - 10.4028/www.scientific.net/AMR.501.165

M3 - Conference contribution

AN - SCOPUS:84860727621

SN - 9783037854020

VL - 501

T3 - Advanced Materials Research

SP - 165

EP - 168

BT - Advanced Materials Research

ER -