Fundamental study on delamination in milling kenaf fiber reinforced plastic composite (Unidirectional)

Azmi Harun, Che Hassan Che Haron, Jaharah A Ghani, Suhaily Mokhtar, Asmawi Sanuddin

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Kenaf Fiber is one of natural fibers which becoming popular as a reinforced for plastic composite material in the industrial application such as aircraft, automotive, sporting goods, and marine engineering. In machined kenaf fiber composite, the important factor should be control is the delamination factor in order to control the quality of product. The delamination of a milled kenaf reinforced plastic is depending on the milling parameters (spindle speed, feed rate and depth of cut). Therefore, a study was carried out to investigate the relationship between the milling parameters and their effects on a kenaf reinforced plastic. In this study, the composite panels were fabricated using vacuum assisted resin transfer molding (VARTM) method. A full factorial design of experiments was used as an initial step to screen the significance of the parameters on the defects using Analysis of Variance (ANOVA). If the curvature of the collected data shows significant, Response Surface Methodology (RSM) is then applied for obtaining a quadratic modeling equation which has more reliable in expressing the optimization. Thus, the objective of this research is obtaining an optimum setting of milling parameters and modeling equations to minimize delamination factor of milled kenaf fiber reinforced plastic composite. The spindle speed and feed rate contributed the most in affecting the delamination factor of kenaf fiber composite.

Original languageEnglish
Title of host publicationProcessing
PublisherAmerican Society of Mechanical Engineers
Volume1
ISBN (Electronic)9780791849897
DOIs
Publication statusPublished - 2016
EventASME 2016 11th International Manufacturing Science and Engineering Conference, MSEC 2016 - Blacksburg, United States
Duration: 27 Jun 20161 Jul 2016

Other

OtherASME 2016 11th International Manufacturing Science and Engineering Conference, MSEC 2016
CountryUnited States
CityBlacksburg
Period27/6/161/7/16

Fingerprint

Kenaf fibers
Fiber reinforced plastics
Delamination
Composite materials
Reinforced plastics
Sporting goods
Marine engineering
Resin transfer molding
Natural fibers
Analysis of variance (ANOVA)
Design of experiments
Industrial applications
Aircraft
Vacuum
Plastics
Defects

ASJC Scopus subject areas

  • Industrial and Manufacturing Engineering

Cite this

Harun, A., Che Haron, C. H., A Ghani, J., Mokhtar, S., & Sanuddin, A. (2016). Fundamental study on delamination in milling kenaf fiber reinforced plastic composite (Unidirectional). In Processing (Vol. 1). American Society of Mechanical Engineers. https://doi.org/10.1115/MSEC20168531

Fundamental study on delamination in milling kenaf fiber reinforced plastic composite (Unidirectional). / Harun, Azmi; Che Haron, Che Hassan; A Ghani, Jaharah; Mokhtar, Suhaily; Sanuddin, Asmawi.

Processing. Vol. 1 American Society of Mechanical Engineers, 2016.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Harun, A, Che Haron, CH, A Ghani, J, Mokhtar, S & Sanuddin, A 2016, Fundamental study on delamination in milling kenaf fiber reinforced plastic composite (Unidirectional). in Processing. vol. 1, American Society of Mechanical Engineers, ASME 2016 11th International Manufacturing Science and Engineering Conference, MSEC 2016, Blacksburg, United States, 27/6/16. https://doi.org/10.1115/MSEC20168531
Harun, Azmi ; Che Haron, Che Hassan ; A Ghani, Jaharah ; Mokhtar, Suhaily ; Sanuddin, Asmawi. / Fundamental study on delamination in milling kenaf fiber reinforced plastic composite (Unidirectional). Processing. Vol. 1 American Society of Mechanical Engineers, 2016.
@inproceedings{30bf4efb394b44148910646c4689d13d,
title = "Fundamental study on delamination in milling kenaf fiber reinforced plastic composite (Unidirectional)",
abstract = "Kenaf Fiber is one of natural fibers which becoming popular as a reinforced for plastic composite material in the industrial application such as aircraft, automotive, sporting goods, and marine engineering. In machined kenaf fiber composite, the important factor should be control is the delamination factor in order to control the quality of product. The delamination of a milled kenaf reinforced plastic is depending on the milling parameters (spindle speed, feed rate and depth of cut). Therefore, a study was carried out to investigate the relationship between the milling parameters and their effects on a kenaf reinforced plastic. In this study, the composite panels were fabricated using vacuum assisted resin transfer molding (VARTM) method. A full factorial design of experiments was used as an initial step to screen the significance of the parameters on the defects using Analysis of Variance (ANOVA). If the curvature of the collected data shows significant, Response Surface Methodology (RSM) is then applied for obtaining a quadratic modeling equation which has more reliable in expressing the optimization. Thus, the objective of this research is obtaining an optimum setting of milling parameters and modeling equations to minimize delamination factor of milled kenaf fiber reinforced plastic composite. The spindle speed and feed rate contributed the most in affecting the delamination factor of kenaf fiber composite.",
author = "Azmi Harun and {Che Haron}, {Che Hassan} and {A Ghani}, Jaharah and Suhaily Mokhtar and Asmawi Sanuddin",
year = "2016",
doi = "10.1115/MSEC20168531",
language = "English",
volume = "1",
booktitle = "Processing",
publisher = "American Society of Mechanical Engineers",

}

TY - GEN

T1 - Fundamental study on delamination in milling kenaf fiber reinforced plastic composite (Unidirectional)

AU - Harun, Azmi

AU - Che Haron, Che Hassan

AU - A Ghani, Jaharah

AU - Mokhtar, Suhaily

AU - Sanuddin, Asmawi

PY - 2016

Y1 - 2016

N2 - Kenaf Fiber is one of natural fibers which becoming popular as a reinforced for plastic composite material in the industrial application such as aircraft, automotive, sporting goods, and marine engineering. In machined kenaf fiber composite, the important factor should be control is the delamination factor in order to control the quality of product. The delamination of a milled kenaf reinforced plastic is depending on the milling parameters (spindle speed, feed rate and depth of cut). Therefore, a study was carried out to investigate the relationship between the milling parameters and their effects on a kenaf reinforced plastic. In this study, the composite panels were fabricated using vacuum assisted resin transfer molding (VARTM) method. A full factorial design of experiments was used as an initial step to screen the significance of the parameters on the defects using Analysis of Variance (ANOVA). If the curvature of the collected data shows significant, Response Surface Methodology (RSM) is then applied for obtaining a quadratic modeling equation which has more reliable in expressing the optimization. Thus, the objective of this research is obtaining an optimum setting of milling parameters and modeling equations to minimize delamination factor of milled kenaf fiber reinforced plastic composite. The spindle speed and feed rate contributed the most in affecting the delamination factor of kenaf fiber composite.

AB - Kenaf Fiber is one of natural fibers which becoming popular as a reinforced for plastic composite material in the industrial application such as aircraft, automotive, sporting goods, and marine engineering. In machined kenaf fiber composite, the important factor should be control is the delamination factor in order to control the quality of product. The delamination of a milled kenaf reinforced plastic is depending on the milling parameters (spindle speed, feed rate and depth of cut). Therefore, a study was carried out to investigate the relationship between the milling parameters and their effects on a kenaf reinforced plastic. In this study, the composite panels were fabricated using vacuum assisted resin transfer molding (VARTM) method. A full factorial design of experiments was used as an initial step to screen the significance of the parameters on the defects using Analysis of Variance (ANOVA). If the curvature of the collected data shows significant, Response Surface Methodology (RSM) is then applied for obtaining a quadratic modeling equation which has more reliable in expressing the optimization. Thus, the objective of this research is obtaining an optimum setting of milling parameters and modeling equations to minimize delamination factor of milled kenaf fiber reinforced plastic composite. The spindle speed and feed rate contributed the most in affecting the delamination factor of kenaf fiber composite.

UR - http://www.scopus.com/inward/record.url?scp=84991821241&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84991821241&partnerID=8YFLogxK

U2 - 10.1115/MSEC20168531

DO - 10.1115/MSEC20168531

M3 - Conference contribution

VL - 1

BT - Processing

PB - American Society of Mechanical Engineers

ER -