Feedstock characterization of elemental nickel and titanium powders mixture for metal injection moulding process

Rosliza Razali, Zulaila Abdullah, Istikamah Subuki, Muhammad Hussain Ismail, Norhamidi Muhamad

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Abstract

The success of metal injection moulding (MIM) process is significantly influenced by the homogeneity level of the powder-binder mixture (feedstock). This paper highlights some initial characterization of the feedstock containing elemental Ni and Ti powders mixture, (50.8 at.% Ni/ 49.2 at.% Ti) mixed with Palm stearin-based binder system. The feedstock was prepared using an internal mixer, HAAKE Rheomix at a temperature of 160°C for 2 hours. The feedstock was then characterized by Differential Scanning Calorimetry (DSC), Thermogravimetric (TGA), Scanning Electron Microscopy (SEM) and Capillary Rheometer. All the results obtained were analyzed and discussed for further injection moulding process.

Original languageEnglish
Title of host publicationApplied Mechanics and Materials
PublisherTrans Tech Publications Ltd
Pages78-82
Number of pages5
Volume575
ISBN (Print)9783038351405
DOIs
Publication statusPublished - 2014
Event3rd International Conference on Materials Engineering and Automatic Control, ICMEAC 2014 - Tianjin
Duration: 17 May 201418 May 2014

Publication series

NameApplied Mechanics and Materials
Volume575
ISSN (Print)16609336
ISSN (Electronic)16627482

Other

Other3rd International Conference on Materials Engineering and Automatic Control, ICMEAC 2014
CityTianjin
Period17/5/1418/5/14

Fingerprint

Metal molding
Injection molding
Feedstocks
Titanium
Nickel
Powders
Binders
Rheometers
Differential scanning calorimetry
Scanning electron microscopy
Temperature

Keywords

  • Metal injection moulding
  • NiTi alloy
  • Powder metallurgy
  • Rheology

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Razali, R., Abdullah, Z., Subuki, I., Ismail, M. H., & Muhamad, N. (2014). Feedstock characterization of elemental nickel and titanium powders mixture for metal injection moulding process. In Applied Mechanics and Materials (Vol. 575, pp. 78-82). (Applied Mechanics and Materials; Vol. 575). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/AMM.575.78

Feedstock characterization of elemental nickel and titanium powders mixture for metal injection moulding process. / Razali, Rosliza; Abdullah, Zulaila; Subuki, Istikamah; Ismail, Muhammad Hussain; Muhamad, Norhamidi.

Applied Mechanics and Materials. Vol. 575 Trans Tech Publications Ltd, 2014. p. 78-82 (Applied Mechanics and Materials; Vol. 575).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Razali, R, Abdullah, Z, Subuki, I, Ismail, MH & Muhamad, N 2014, Feedstock characterization of elemental nickel and titanium powders mixture for metal injection moulding process. in Applied Mechanics and Materials. vol. 575, Applied Mechanics and Materials, vol. 575, Trans Tech Publications Ltd, pp. 78-82, 3rd International Conference on Materials Engineering and Automatic Control, ICMEAC 2014, Tianjin, 17/5/14. https://doi.org/10.4028/www.scientific.net/AMM.575.78
Razali R, Abdullah Z, Subuki I, Ismail MH, Muhamad N. Feedstock characterization of elemental nickel and titanium powders mixture for metal injection moulding process. In Applied Mechanics and Materials. Vol. 575. Trans Tech Publications Ltd. 2014. p. 78-82. (Applied Mechanics and Materials). https://doi.org/10.4028/www.scientific.net/AMM.575.78
Razali, Rosliza ; Abdullah, Zulaila ; Subuki, Istikamah ; Ismail, Muhammad Hussain ; Muhamad, Norhamidi. / Feedstock characterization of elemental nickel and titanium powders mixture for metal injection moulding process. Applied Mechanics and Materials. Vol. 575 Trans Tech Publications Ltd, 2014. pp. 78-82 (Applied Mechanics and Materials).
@inproceedings{c4e93261e8634f64b9563162a5013c4f,
title = "Feedstock characterization of elemental nickel and titanium powders mixture for metal injection moulding process",
abstract = "The success of metal injection moulding (MIM) process is significantly influenced by the homogeneity level of the powder-binder mixture (feedstock). This paper highlights some initial characterization of the feedstock containing elemental Ni and Ti powders mixture, (50.8 at.{\%} Ni/ 49.2 at.{\%} Ti) mixed with Palm stearin-based binder system. The feedstock was prepared using an internal mixer, HAAKE Rheomix at a temperature of 160°C for 2 hours. The feedstock was then characterized by Differential Scanning Calorimetry (DSC), Thermogravimetric (TGA), Scanning Electron Microscopy (SEM) and Capillary Rheometer. All the results obtained were analyzed and discussed for further injection moulding process.",
keywords = "Metal injection moulding, NiTi alloy, Powder metallurgy, Rheology",
author = "Rosliza Razali and Zulaila Abdullah and Istikamah Subuki and Ismail, {Muhammad Hussain} and Norhamidi Muhamad",
year = "2014",
doi = "10.4028/www.scientific.net/AMM.575.78",
language = "English",
isbn = "9783038351405",
volume = "575",
series = "Applied Mechanics and Materials",
publisher = "Trans Tech Publications Ltd",
pages = "78--82",
booktitle = "Applied Mechanics and Materials",

}

TY - GEN

T1 - Feedstock characterization of elemental nickel and titanium powders mixture for metal injection moulding process

AU - Razali, Rosliza

AU - Abdullah, Zulaila

AU - Subuki, Istikamah

AU - Ismail, Muhammad Hussain

AU - Muhamad, Norhamidi

PY - 2014

Y1 - 2014

N2 - The success of metal injection moulding (MIM) process is significantly influenced by the homogeneity level of the powder-binder mixture (feedstock). This paper highlights some initial characterization of the feedstock containing elemental Ni and Ti powders mixture, (50.8 at.% Ni/ 49.2 at.% Ti) mixed with Palm stearin-based binder system. The feedstock was prepared using an internal mixer, HAAKE Rheomix at a temperature of 160°C for 2 hours. The feedstock was then characterized by Differential Scanning Calorimetry (DSC), Thermogravimetric (TGA), Scanning Electron Microscopy (SEM) and Capillary Rheometer. All the results obtained were analyzed and discussed for further injection moulding process.

AB - The success of metal injection moulding (MIM) process is significantly influenced by the homogeneity level of the powder-binder mixture (feedstock). This paper highlights some initial characterization of the feedstock containing elemental Ni and Ti powders mixture, (50.8 at.% Ni/ 49.2 at.% Ti) mixed with Palm stearin-based binder system. The feedstock was prepared using an internal mixer, HAAKE Rheomix at a temperature of 160°C for 2 hours. The feedstock was then characterized by Differential Scanning Calorimetry (DSC), Thermogravimetric (TGA), Scanning Electron Microscopy (SEM) and Capillary Rheometer. All the results obtained were analyzed and discussed for further injection moulding process.

KW - Metal injection moulding

KW - NiTi alloy

KW - Powder metallurgy

KW - Rheology

UR - http://www.scopus.com/inward/record.url?scp=84904395904&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84904395904&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMM.575.78

DO - 10.4028/www.scientific.net/AMM.575.78

M3 - Conference contribution

SN - 9783038351405

VL - 575

T3 - Applied Mechanics and Materials

SP - 78

EP - 82

BT - Applied Mechanics and Materials

PB - Trans Tech Publications Ltd

ER -