Fabrication and characterisation of polyethersulfone/chitosan/non-ionic nanofiltration membrane for dyes removal

Fasihah Johary, Fatin Faziera Mohd Zaimin, Rosiah Rohani, Abdul Rahman Hassan, Syazrin Syima Sharifuddin, Mohd Hafez Mohd Isa

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

Recently, dyes are generally used in various industries and release of these dyes into streams will pose a serious threat to the environment. In this research, a nanofiltration membrane was fabricated via phase inversion as it is one of the most convenient methods for membrane fabrication. It is used in removing dyes by using pluronic as a surfactant and chitosan as an additive. By varying the concentration of pluronic as a surfactant at 1 wt%, 2 wt%, and 3 wt%, and a constant amount of chitosan as an additive, three newly dope solutions were formulated. The fabricated membranes were analyzed by evaluating the membrane in terms of pure water permeation (PWP), permeation flux, salts rejection and dyes rejection. The introduction of pluronic as a surfactant and chitosan as an additive to the nanofiltration membrane produced high PWP and presented high salts rejection and dyes removal. Generally, high dyes rejections were achieved by M3 which contained high weight percentage (wt%) of pluronic as it showed highest percentage rejection for acid red, methyl blue and reactive black 5. The functional groups of the membranes were characterized and verified by using Fourier transform infrared spectroscopy (FTIR).

Original languageEnglish
Title of host publicationRecent Advancement on Applied Physics, Industrial Chemistry and Chemical Technology
Subtitle of host publicationProceedings of the International Conference on Recent Advancements in Science and Technology 2017, ICoRAST 2017
PublisherAmerican Institute of Physics Inc.
Volume1972
ISBN (Electronic)9780735416796
DOIs
Publication statusPublished - 5 Jun 2018
EventInternational Conference on Recent Advancements in Science and Technology 2017, ICoRAST 2017 - Melaka, Malaysia
Duration: 7 Nov 20178 Nov 2017

Other

OtherInternational Conference on Recent Advancements in Science and Technology 2017, ICoRAST 2017
CountryMalaysia
CityMelaka
Period7/11/178/11/17

Fingerprint

rejection
dyes
membranes
fabrication
surfactants
salts
water
industries
infrared spectroscopy
inversions
acids

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Cite this

Johary, F., Zaimin, F. F. M., Rohani, R., Hassan, A. R., Sharifuddin, S. S., & Isa, M. H. M. (2018). Fabrication and characterisation of polyethersulfone/chitosan/non-ionic nanofiltration membrane for dyes removal. In Recent Advancement on Applied Physics, Industrial Chemistry and Chemical Technology: Proceedings of the International Conference on Recent Advancements in Science and Technology 2017, ICoRAST 2017 (Vol. 1972). American Institute of Physics Inc.. https://doi.org/10.1063/1.5041238

Fabrication and characterisation of polyethersulfone/chitosan/non-ionic nanofiltration membrane for dyes removal. / Johary, Fasihah; Zaimin, Fatin Faziera Mohd; Rohani, Rosiah; Hassan, Abdul Rahman; Sharifuddin, Syazrin Syima; Isa, Mohd Hafez Mohd.

Recent Advancement on Applied Physics, Industrial Chemistry and Chemical Technology: Proceedings of the International Conference on Recent Advancements in Science and Technology 2017, ICoRAST 2017. Vol. 1972 American Institute of Physics Inc., 2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Johary, F, Zaimin, FFM, Rohani, R, Hassan, AR, Sharifuddin, SS & Isa, MHM 2018, Fabrication and characterisation of polyethersulfone/chitosan/non-ionic nanofiltration membrane for dyes removal. in Recent Advancement on Applied Physics, Industrial Chemistry and Chemical Technology: Proceedings of the International Conference on Recent Advancements in Science and Technology 2017, ICoRAST 2017. vol. 1972, American Institute of Physics Inc., International Conference on Recent Advancements in Science and Technology 2017, ICoRAST 2017, Melaka, Malaysia, 7/11/17. https://doi.org/10.1063/1.5041238
Johary F, Zaimin FFM, Rohani R, Hassan AR, Sharifuddin SS, Isa MHM. Fabrication and characterisation of polyethersulfone/chitosan/non-ionic nanofiltration membrane for dyes removal. In Recent Advancement on Applied Physics, Industrial Chemistry and Chemical Technology: Proceedings of the International Conference on Recent Advancements in Science and Technology 2017, ICoRAST 2017. Vol. 1972. American Institute of Physics Inc. 2018 https://doi.org/10.1063/1.5041238
Johary, Fasihah ; Zaimin, Fatin Faziera Mohd ; Rohani, Rosiah ; Hassan, Abdul Rahman ; Sharifuddin, Syazrin Syima ; Isa, Mohd Hafez Mohd. / Fabrication and characterisation of polyethersulfone/chitosan/non-ionic nanofiltration membrane for dyes removal. Recent Advancement on Applied Physics, Industrial Chemistry and Chemical Technology: Proceedings of the International Conference on Recent Advancements in Science and Technology 2017, ICoRAST 2017. Vol. 1972 American Institute of Physics Inc., 2018.
@inproceedings{cc924683dab44c5b9f781bfdeab98c52,
title = "Fabrication and characterisation of polyethersulfone/chitosan/non-ionic nanofiltration membrane for dyes removal",
abstract = "Recently, dyes are generally used in various industries and release of these dyes into streams will pose a serious threat to the environment. In this research, a nanofiltration membrane was fabricated via phase inversion as it is one of the most convenient methods for membrane fabrication. It is used in removing dyes by using pluronic as a surfactant and chitosan as an additive. By varying the concentration of pluronic as a surfactant at 1 wt{\%}, 2 wt{\%}, and 3 wt{\%}, and a constant amount of chitosan as an additive, three newly dope solutions were formulated. The fabricated membranes were analyzed by evaluating the membrane in terms of pure water permeation (PWP), permeation flux, salts rejection and dyes rejection. The introduction of pluronic as a surfactant and chitosan as an additive to the nanofiltration membrane produced high PWP and presented high salts rejection and dyes removal. Generally, high dyes rejections were achieved by M3 which contained high weight percentage (wt{\%}) of pluronic as it showed highest percentage rejection for acid red, methyl blue and reactive black 5. The functional groups of the membranes were characterized and verified by using Fourier transform infrared spectroscopy (FTIR).",
author = "Fasihah Johary and Zaimin, {Fatin Faziera Mohd} and Rosiah Rohani and Hassan, {Abdul Rahman} and Sharifuddin, {Syazrin Syima} and Isa, {Mohd Hafez Mohd}",
year = "2018",
month = "6",
day = "5",
doi = "10.1063/1.5041238",
language = "English",
volume = "1972",
booktitle = "Recent Advancement on Applied Physics, Industrial Chemistry and Chemical Technology",
publisher = "American Institute of Physics Inc.",

}

TY - GEN

T1 - Fabrication and characterisation of polyethersulfone/chitosan/non-ionic nanofiltration membrane for dyes removal

AU - Johary, Fasihah

AU - Zaimin, Fatin Faziera Mohd

AU - Rohani, Rosiah

AU - Hassan, Abdul Rahman

AU - Sharifuddin, Syazrin Syima

AU - Isa, Mohd Hafez Mohd

PY - 2018/6/5

Y1 - 2018/6/5

N2 - Recently, dyes are generally used in various industries and release of these dyes into streams will pose a serious threat to the environment. In this research, a nanofiltration membrane was fabricated via phase inversion as it is one of the most convenient methods for membrane fabrication. It is used in removing dyes by using pluronic as a surfactant and chitosan as an additive. By varying the concentration of pluronic as a surfactant at 1 wt%, 2 wt%, and 3 wt%, and a constant amount of chitosan as an additive, three newly dope solutions were formulated. The fabricated membranes were analyzed by evaluating the membrane in terms of pure water permeation (PWP), permeation flux, salts rejection and dyes rejection. The introduction of pluronic as a surfactant and chitosan as an additive to the nanofiltration membrane produced high PWP and presented high salts rejection and dyes removal. Generally, high dyes rejections were achieved by M3 which contained high weight percentage (wt%) of pluronic as it showed highest percentage rejection for acid red, methyl blue and reactive black 5. The functional groups of the membranes were characterized and verified by using Fourier transform infrared spectroscopy (FTIR).

AB - Recently, dyes are generally used in various industries and release of these dyes into streams will pose a serious threat to the environment. In this research, a nanofiltration membrane was fabricated via phase inversion as it is one of the most convenient methods for membrane fabrication. It is used in removing dyes by using pluronic as a surfactant and chitosan as an additive. By varying the concentration of pluronic as a surfactant at 1 wt%, 2 wt%, and 3 wt%, and a constant amount of chitosan as an additive, three newly dope solutions were formulated. The fabricated membranes were analyzed by evaluating the membrane in terms of pure water permeation (PWP), permeation flux, salts rejection and dyes rejection. The introduction of pluronic as a surfactant and chitosan as an additive to the nanofiltration membrane produced high PWP and presented high salts rejection and dyes removal. Generally, high dyes rejections were achieved by M3 which contained high weight percentage (wt%) of pluronic as it showed highest percentage rejection for acid red, methyl blue and reactive black 5. The functional groups of the membranes were characterized and verified by using Fourier transform infrared spectroscopy (FTIR).

UR - http://www.scopus.com/inward/record.url?scp=85048880470&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85048880470&partnerID=8YFLogxK

U2 - 10.1063/1.5041238

DO - 10.1063/1.5041238

M3 - Conference contribution

AN - SCOPUS:85048880470

VL - 1972

BT - Recent Advancement on Applied Physics, Industrial Chemistry and Chemical Technology

PB - American Institute of Physics Inc.

ER -